Homebrew Beer Recipes | Page 103 | Browse 315,000+ at Brewer's Friend

Author:

Mig

Boil Size: 39 Litres

Boil Time: 60

Boil Gravity: 1.07

Efficiency: 74

Mash Thickness: 3.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/10/2016 8:57 PM

Notes: Fir flavour with out harshness add carafa III 60 minutes into mash and add chocolate afte mash is complete and at the start of sparge

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/27/2017 12:15 AM

Notes:

Author:

Gummi Ben - Norðan 2

Boil Size: 22 Litres

Boil Time: 90

Boil Gravity: 1.049

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/27/2015 3:05 PM

Notes: 90 minute boil. Chill to 18°C and pitch yeast. Oxygenate for 60 seconds. Ramp primary 5 days up to 24°C until reaching a terminal gravity 1.013. Rack to secondary 10°C for 2 weeks. Bottle prime with Simplicity at a rate of 32g/gallon. Ready in 4 weeks. Best after 6 weeks.
Store very cool (< 10°C) is storing longer than 2 months. (Belgian Pale’s are not a long term storage ale).

Author:

dellbrewer

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.044

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: Keg

Priming Amount: N/A

Creation Date: 1/5/2019 5:51 PM

Notes: Secondary was performed in the keg at ferm temps. Temp controller cycled heat and cool with a 3 deg delta from 68F thus max swing was theoretically 65-71F. Given this is January I believe it stayed mostly on the lower end (65-68F). Actual (1st brew) OG/FG was 1054 and 1011 respectively for 5.65% ABV.

Author:

Tanelz

Boil Size: 23 Litres

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 15 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/25/2015 11:46 AM

Notes: Quite unique taste beer. You feel mild black bread flavor and... something more.
Well balance, definitely one of my best beers. Cheers. (Maybe add some more someked malt).

Author:

Brian BrewDaddy Pinto

Boil Size: 5 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/3/2011 7:52 PM

Notes:

Author:

Hop~Mama

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: Dextrose

Priming Amount: 5 oz.

Creation Date: 8/31/2012 6:27 PM

Notes: 8/31/2012
Steeped grains in 1 gal of water for 40 mins @ 160d
Rinsed grains with 1 gal of water @ 130d
Added 1 gal water to kettle and brought to a boil.
Added 60 min. hops, no extract yet. Will be added at 30 mins.
Cooled wort to 90d. Need wort chiller.

OG: 1.055 @ 78d = 1.056

Pitched @ 78d working to bring temp down.

9/6/2012
Added dry hops. 74d up from about 70d two days ago. Allowing a diacetyl rest. A lot of temp swings, but no way to really dial that in yet :(

9/11/2012
Hydrometer reading 1.015. Probably as low as I'll get with this yeast. Decided it fit the profile of an English IPA because of the hops used and that the yeast strain is basically an english ale yeast strain.

5.37% is pretty respectable still and if I understand attenuation right, the beer will be a tad sweeter and have better mouthfeel than a drier beer.

Still plan to add orange extract to the batch before bottling. Should be interesting. Could've used orange peels in the fermentor, but I have the extract on hand and would like to test its effectiveness.

9/18/2012
Finally bottled today. Used 5oz dextrose for priming added a few drops of extra strength orange oil to the primary before bottling. Didn't take a taste so the end result with the orange will be a surprise. There was a nice orangey scent though.

Got 24 25 oz bottles out of it. Super hazy, tons of sediment stirred up because of my crazy insistence on no secondary and adding priming sugar to the primary.
Bottled 12 right away, then waited 30 mins to do the rest. Will keep the batches separate to see if the 30 min. wait allowed the sediment to settle at all. Should be able to tell by what's visible in the bottom of the bottles.

The sediment will settle and pack on the bottom of the bottles, but still, next time I'm either gonna have to add the dex. & flavorings earlier to allow time for the gunk to re-settle or add a screen to the spigot opening. Probably both. I'm stubborn. The main reason I stick with extract brewing is for the relative simplicity of the process. Anything I can do to make the process even less complicated, I intend to do :)

9/20/2012
I know it's green, but I had to see what the base product is like. I chilled one, the sediment is already settling nicely but of course the beer isn't clear yet. First sip is *twang*! Maybe the orange oil did come through, maybe it's the hops? Then it smooths out to honey sweetness, can't say about the victory malt yet, probably lost in the rest but may meld better later. The back end is slightly bitter hops. Not much of a hop nose, especially after all those Red Hoptobers over the past few weeks, and I did go with noble hops, pretty mellow.

Good body, almost thickish, and it's very warming so the FG may have dropped a couple more points at the end. I rocked the bucket a few times toward the end to make sure the dry hops were fully utilized and to rouse the yeast. If there are fruity esters I don't know it because my palate isn't up to tasting yeast yet, and there's the orange. There should be according to the yeast specs, esp. considering the temps I fermented at!

There's a lot going on in this one, and I can't discern particular hop flavors very well yet either, but for being green I'd say it's got promise as a good summer beer when the carbonation kicks in :D Can't wait to try it in another month....

Author:

Lycan

Boil Size: 8.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/4/2012 4:01 PM

Notes: Add a second smack pack to help bring down the gravity of the beer.

Author:

phrerix

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.073

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 1.0

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/8/2017 9:51 PM

Notes:

Author:

Shølbryggeriet

Boil Size: 54.1 Litres

Boil Time: 90

Boil Gravity: 1.05

Efficiency: 63

Mash Thickness: 4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 20 ° C

Priming Method: Mangrove Jack Carbonation Drops

Priming Amount: 1 per 0.5l bottle

Creation Date: 5/27/2015 1:48 PM

Notes: We use 4 vials of yeast in 3.5 l starter.
The batch is split in 2 fermentors.
20 dried chillies added together with dry hops in one of the fermentors.

Author:

shockey8oz@yahoo.com

Boil Size: 6 Gallons

Boil Time: 15

Boil Gravity: 1.033

Efficiency: 68

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/24/2018 4:26 PM

Notes: Mash and collect enough wort to do a 15 minute boil to pasteurize. Chill to 95-100F (35-38C). Measure pH. Add Lactic Acid (88%) to wort until pH reaches ~4.5. Pitch quart of Good Belly Probiotic Juice Drink into kettle. Hold temperature at 95-100F for 24-72 hours. pH should be between 3.2-3.6. Place kettle back on fire, hop and boil as normal. Chill and rack to carboy. Pitch 2565 ferment at 68F (20C) for 3-4 days. Raise to 71F until fermentation is complete.

Mangoes: Purchase 5 lbs (2.25 kg) of mangoes. Peel, de-seed, and cube the fruit. Place fruit in a freezer storage bag. After two days, thaw and crush fruit with a rolling pin. Be careful not to damage the bag. Refreeze and repeat until the fruit in mushy. After primary fermentation is complete, rack beer into secondary vessel on top of the frozen mangoes. Check daily to punch down floating fruit to avoid mold. Leave for 7-14 days (to taste).

Prepare two vanilla beans and sanitize with enough vodka to cover the beans. Place beans in a sanitized dry hopping vessel or muslin bag. Place in secondary vessel and check flavor daily. The vanilla should be very subtle. Once the taste is where you like it, remove beans. Package as normal.

Author:

Brew Lab

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/31/2015 7:29 PM

Notes:

Author:

Ozarks Mountain Brewery

Boil Size: 8.5 Gallons

Boil Time: 90

Boil Gravity: 1.065

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/27/2016 12:32 AM

Notes:

Author:

Barking Kettle SJ

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.077

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/28/2019 3:25 PM

Notes:

Author:

KnotCurser

Boil Size: 1.5 Gallons

Boil Time: 60

Boil Gravity: 1.058

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/8/2012 9:42 PM

Notes:

Author:

cjmck

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.035

Efficiency: 70

Mash Thickness: 1.31

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/14/2017 10:20 PM

Notes:

Author:

beavis2000

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/4/2012 5:10 AM

Notes:

Author:

Eric M

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.034

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 55 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/5/2019 9:58 PM

Notes: Found on https://byo.com/recipe/pilsner-urquell-clone/

And slightly altered.

Author:

NealS

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 75

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/14/2015 9:45 PM

Notes:

Author:

4467Brewing

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: N/A

Priming Method: sucrose

Priming Amount: N/A

Creation Date: 5/18/2015 8:41 PM

Notes: Developed based on several articles but mostly on one from BYO.

First batch is awesome!