Homebrew Beer Recipes | Page 114 | Browse 315,000+ at Brewer's Friend

Author:

Josh (Brewer's Friend)

Boil Size: 5 Gallons

Boil Time: 120

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/5/2012 9:23 PM

Notes: Target Pre-Boil Volume: 5 gal
Target Post-Boil Volume: 3 gal
Target Post-Boil Gravity: 1.269

Actual Pre-Boil gravity at 5 gallons: 1.116, estimated post-boil wort gravity: 1.193
(probably didn't use enough corn sugar, weight measurement was skewed)

Mash with:
1/2 tsp Calcium Chloride
1 tsp Epsom Salt
1/2 tsp Baking Soda

Boil:
- mix all boil hops together (6 oz) and split into 24 equal size additions of .25 oz each
- add one hop addition every 5 minutes during boil (measurements in ingredients set at 1 hr, average time in boil)

- remove 1 pint wort (@1.193), mix with 2 pints water and make starter (@1.064) for WLP099

- mix 3 Qts wort (@1.193) with 1 gallon water for primary (@1.083)
***Use plastic fermenter with lid to allow for easy wort/hop additions***
- pitch 1056

- put remaining ~2 gallons wort (@1.193) in sanitized container, refrigerate

Primary Fermentation:
- Wort addition
----- once fermentation starts, perform wort addition every 12 hours for 8.5 days (17 additions):
-------- add 2 cups from reserved wort using sanitized measuring cup
----- *** monitor gravity of primary to check for slowing ***
- On addition 10, add high gravity yeast starter
- Add oxygen daily (evening) for 4 days. Stir wort vigorously with mash paddle.

Secondary Fermentation:
- Transfer to secondary after 10 days

Dry Hop (secondary only):
- mix dry hops together and divide into 28 equal portions
- add 1 portion daily (evening) for 28 days

Bottle:
- bottle after 28 days in secondary
- 12 oz bottles
- measure gravity before bottling: G
- bottle with:
2.5 - ( (G - FG) * 1.6 * 10^4 ) / 11
ounces of corn sugar
Expected volumes CO2 with no additional sugar:
678 * ( G - FG ) + 0.9

Total expected effective OG: 1.136

ACTUALS:
- OG at beginning of primary: 1.075
- Effective OG: 1.153
- Starting with addition 5, added .19 lbs corn sugar for next 6 additions, then .38 lbs for following 3 additions
- added 099 with addition 7
- 10 total wort additions, 13 total additions
- dry hopped with additions 11 to 22
- racked evening after final dry hop addition (time 23, day 11.5)
- gravity at time 8: 1.058, at time 10: 1.070, at time 23: 1.042

Author:

garrad21

Boil Size: 11.64 Gallons

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 80

Mash Thickness: 2.74

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/2/2020 11:37 PM

Notes: Recipe from CB&B 2020 IPA edition:

5 gallon recipe

1.061 OG
1.008 FG

8.4 lbs pils
3.6 lbs flaked rice or rice flour

.18 oz Magnum @90
1.7 ml hop extract @90
.6 oz Mosaic @10
.6 oz Centennial @10
.6 oz Mosaic @WP (188F)
.6 oz Centennial @WP (188F)
2.8 oz Chinook @DH
2.8 oz Cascade @DH
1.4 oz Amarillo @DH

34/70 Yeast @ 65F

___________________________________________________

I don't have any hop extract, so I decided to use .75 oz of chinook. I built the water profile for a west coast IPA.

Author:

Dustin Bagby

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 64

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/20/2011 6:06 PM

Notes:

Author:

dpatrickv

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.057

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/20/2012 6:50 PM

Notes: 2 weeks primary @ 65F
10 days secondary @ 65F

This actually came out pretty good. The toasted coconut really tones down the bitterness of the hops but does not take it away comepletely. Will definitely brew again.

Author:

Patmaguire19

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 67 ° F

Priming Method: Corn sugar

Priming Amount: 4 oz

Creation Date: 2/3/2015 1:55 AM

Notes:

Author:

DavidHume

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.007

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.5

Primary Temp: 63 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/12/2015 7:37 PM

Notes:

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/31/2015 11:20 PM

Notes:

Author:

kblankenship11

Boil Size: 6.75 Gallons

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 75

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/9/2018 6:18 PM

Notes: https://www.homebrewersassociation.org/homebrew-recipe/beer-recipe-of-the-week-orpheo-roja/

Use soft brewing water, acidified slightly if possible.

Mash grains for 60 minutes at 154°F (67°C). Follow boil schedule.
Ferment at 68°F (20°C), transfer, and condition in a secondary vessel for several days before bottling.

Bottle prime with the usual 0.75 cups (177 mL) dextrose, or corn sugar, per 5 gallon batch.

Chimay has a slightly higher level of carbonation than usual with the style of beer, so feel free to add a few extra teaspoons of priming sugar. It is also recommended to bottle in heavey-gauge, 750 mL bottles if possible (especially with the high level of carbonation). Standard beer bottles should be fine, but regular wine bottles won’t cut it.

When enjoying, pour into a goblet at around 50°F (10°C)

Author:

bradoslovich

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/22/2013 9:54 PM

Notes:

Author:

JayDoe

Boil Size: 7.75 Gallons

Boil Time: 90

Boil Gravity: 1.08

Efficiency: 75

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/28/2012 8:52 PM

Notes: Brewed - 1/2/21

May have been a little too ambitious with this one, I didn't get nearly the efficiency that was calculated, and I don't think I can blame it all on too much water this time.

Hops are adjusted in recipe as per each package AA's

Used 3 liter starter and made a big blow-off mess. After 24 hours the krausen was spewing so violently out of the airlock that it blew the top off of the fermenter; twice.

Will update numbers when finished, at least four weeks

2/2/21 - UPDATE - FG of 1.011 for a whopping attenuation of 85%. Sugar primed keg, will wait 2+ weeks

Actual Results:

Total water: 11.5 gallons - would lessen to 10.75 - 11
Pre-boil volume: 8.25 gallons - would lesson to 7.75
Ending kettle volume: 7 gallons - would lessen to 6.5
Boil time: 90 min
Efficiency: 67%
OG: 1.080
FG: 1.011
ABV: 9.1%
Attenuation: 85%
IBU's: 110
SRM: 7.9

This recipe has been updated based on previous results.

Author:

SpencerG11

Boil Size: 6.5 Gallons

Boil Time: 90

Boil Gravity: 1.045

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/13/2016 3:30 AM

Notes:

Author:

bigjlw75

Boil Size: 7 Gallons

Boil Time: 90

Boil Gravity: 1.069

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 72 ° F

Priming Method: Light DME

Priming Amount: 7.2 oz

Creation Date: 6/28/2015 3:27 AM

Notes: This Dogfish Head 90 Minute IPA Clone is created with a single infusion mash at 150°F (66°C) for 60 minutes.
Boil for 90 minutes. Combine all of your kettle hops into one bowl, weigh out 0.2 ounces (5.6 grams) of the hop mixture and add to the boil every five minutes for the duration of the boil.

Ferment at 72°F (22°C) until gravity reaches terminal. Rack into secondary and add dry hops for at least one week. Package and serve.

Author:

David Ramthun

Boil Size: 7.00004 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/1/2011 5:14 PM

Notes:

Author:

duncans

Boil Size: 10 Litres

Boil Time: 90

Boil Gravity: 1.055

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 22 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/18/2016 7:40 AM

Notes: http://www.castlemalting.com/CastleMaltingBeerRecipes.asp?Command=RecipeView&RecipeID=160

This gives around 6.5% according to recipe. Attenuation maybe better than default 70%.

Author:

KpaZzeto

Boil Size: 26 Litres

Boil Time: 60

Boil Gravity: 1.036

Efficiency: 73

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/11/2018 2:00 PM

Notes: Após o Mashout ferver o mosto por 5 minutos e resfriar a ambiente.
Corrigir o pH da mostura após o resfriamento para 4,5 com ácido lático.
Corrigir a temperatura para 45ºC e colocar 500g malte pilsen na panela borbulhar CO2 para eliminar o O2.
Lacrar a panela e acompanhar a acidificação até o pH 3.4.(kettle sour)
Fervura 60 min normal e pau na maquina.

Colocar 2,4kg de purê de manga palmer filtrado no final da fermentação primaria.

Acidificação com lactobacilos do malte (500g) @45ºC com 30hs chegou no ph 3.25.
Aroma ficou bem limpo sem indicação de contaminação.
Não houve formação do biofilme.
Foi levado 22l para o fermentador.

Author:

Hopeful Brewing

Boil Size: 7.28 Gallons

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 72

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 93 ° F

Priming Method: co2

Priming Amount: 23.72 psi

Creation Date: 2/26/2021 6:32 AM

Notes: How to make video on Youtube - https://youtu.be/BQAaQu-EXjI

Author:

Eggertsville Brewhouse

Boil Size: 12.5 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/30/2012 3:11 PM

Notes:

Author:

timplo

Boil Size: 32.6 Litres

Boil Time: 120

Boil Gravity: 1.047

Efficiency: 78

Mash Thickness: 2.8

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/12/2015 12:31 AM

Notes: Ideally wanted Thames Valley 1275 yeast: 77% avg attenuation.

Author:

BrewKing60

Boil Size: 15 Gallons

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 75

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/8/2016 2:05 PM

Notes: put final hops in at end of boil - when I reach 150 degrees (quickly) let it stand for 30 minutes.

MASH TUN WATER VOLUME:
8.5 gallons of mash
6.5 gallons of sparge

Author:

RasMouSein

Boil Size: 76 Litres

Boil Time: 90

Boil Gravity: 1.039

Efficiency: 78

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 11.5 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/23/2016 1:03 AM

Notes: Plan
Primary fermentation at 11.5c for 3-5 days till 75% of attenuation.
Diacetil rest 18c 3-4 days.
Transfer to secondary.
Lager 4-6 weeks 0-4c,drop 3c/day.