Homebrew Beer Recipes | Page 116 | Browse 315,000+ at Brewer's Friend

Author:

oohlahlah

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.058

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/16/2013 10:51 PM

Notes:

Author:

johnson

Boil Size: 7 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: corn sugar

Priming Amount: 4 oz.

Creation Date: 1/17/2012 8:14 PM

Notes: Boil both hops additions in nylon straining bags.

Cold condition in secondary for 3-4 weeks at 45-55F.

Author:

unioncitysfinest

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: Wheat DME

Priming Amount: 1.25 C + 2 C Water

Creation Date: 2/10/2015 8:23 AM

Notes: Clone Sunshine Wheat Beer

(secondary yeast to try Wyeast's 1010 American)

Author:

Betovar

Boil Size: 28 Litres

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 80

Mash Thickness: 3.58

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 19 ° C

Priming Method: Dextrose

Priming Amount: 150.1g

Creation Date: 9/2/2015 8:53 PM

Notes:

Author:

Brew Camp

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.084

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/15/2017 5:17 PM

Notes: 1. Fill your kettle with 3 gallons of water and turn on heat
2. When the water is hot, before it boils, carefully add your Dry Malt Extract (DME), stirring to avoid clumps. You liquid in your kettle is now wort (malt liquid).
3. Bring your wort to a boil
4. When the wort is at full boil, add 2 oz. Hallertau hops to the boil and start a 60 minute timer
5. Turn off heat. Cool wort by placing kettle in an ice bath in your sink.
6. When it reaches about room temperature, rack your wort into your fermentation vessel.
7. Top off the your fermentation vessel with cool water to reach 5 gallons of wort.
8. Use your hydrometer to find your original gravity and record
9. Pitch your yeast and place airlock (and lid) on your fermentation vessel.
10. When visible signs of fermentation have disappeared for several days, at least 14 days, rack your beer into your bottling bucket.
11. Add 5 oz priming sugar to 1 cup water and bring to a simmer. Allow to cool some, then add to bottling bucket. Stir gently with sanitized bottling wand.
12. Fill bottles and cap.
13. Store bottles at room temperature for 14 days.
14. Refrigerate overnight
15. Enjoy!!!

Author:

bhive01

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/4/2018 6:13 PM

Notes: Going back to the original recipe more. The Lida Kviek was nice, but it wasn't the same. I've drifted away on the Yeast and the hops a bit.
Updating with more recent ingredients I have on hand. Using OYL-044 more nowadays due to lesser WLP availability nearby Seems like the same yeast so far.

Author:

Planet Scott

Boil Size: 13 Gallons

Boil Time: 90

Boil Gravity: 1.075

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/24/2014 2:57 PM

Notes: This is an attempt to replicate the Kasteel Winter.

Use 2 packs of Saf Ale US-05 and 1 pack of Safebrew T-58

Boil half a pound of lactose with 4 oz of dark chocolate bar, then add to keg and condition for 65 years.....Just kidding....At least three weeks or more.

Scored 45 out of 50 points at the 2015 Peach State Brew Off. Advanced to mini BOS, but was bumped out for being in the wrong category.

Author:

andete

Boil Size: 5 Litres

Boil Time: 90

Boil Gravity: 1.019

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/20/2015 5:42 PM

Notes: 1 third of LIPA I Base dry hopped with Mosaic hops.

Author:

crito

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.5

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/25/2013 3:38 PM

Notes:

Author:

M R

Boil Size: 7 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/17/2012 8:29 PM

Notes: Flying Dog Doggy Style Classic Pale Ale CLONE

Efficiency 70 % , so adjust recipe to yours.
3 yeasts to choose.

Author:

TravelDog

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.5

Primary Temp: N/A

Priming Method: 3/4

Priming Amount: cup

Creation Date: 3/18/2015 10:45 PM

Notes: Harvested top crop of yeast from Colorado IPL. Day two of fermentation.

Author:

enrique

Boil Size: 1.5 Gallons

Boil Time: 90

Boil Gravity: 1.038

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/7/2016 3:50 PM

Notes:

Author:

Alepp

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 70 ° F

Priming Method: Corn Sugar

Priming Amount: 139 grams

Creation Date: 4/5/2017 2:45 AM

Notes: Mash at 150F for 60 mins
Add half of the water salt additions to the mash and the rest at sparge.
Add the FWH hops during runoff to allow hops to steep in hot wort as the mash is sparged.
Boil for 60 mins
Follow whirlpool hops schedule. Turn off whirlpool for last hops addition (the 20 min addition)
Pitch yeast and ferment at 67F for 3 days then raise temp 2 degrees each day until you reach 73F.
Pack at 2.6 vols
IBU's Target = 80

Pours hazy dark orange with creamy head. Juicy hop aroma, big citrus and tropical fruit. Flavor is lots of orange and tropical fruit with bready malt backbone and some piney resiny bitterness in the finish. Mouthfeel medium bodied with smooth carbonation. Serve in glass.

Author:

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.06

Efficiency: 72

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 65 ° F

Priming Method: co2

Priming Amount: N/A

Creation Date: 1/11/2020 6:10 AM

Notes: OG: 1.073
FG: 1.018
IBUs: 38
ABV: 7.3%

Acidulated malt to adjust mash pH to 5.2 Mash the grains at 151°F (66°C) for 25 minutes. Vorlauf for 15 minutes then run off into the kettle. Sparge the grains and top up as necessary to get 6 gallons (23 liters) of wort, or more, depending on your evaporation rate. Boil 60 minutes, adding hops according to the schedule. Whirlpool for 45 minutes, adding first whirlpool addition at the start and the next after 20 minutes. After the boil, chill the wort to slightly below fermentation temperature, about 64°F (18°C). Aerate the wort and pitch the yeast (ensure a healthy pitch of the correct amount yeast). Ferment at 65°F (18°C). Add dry hops according to the schedule. Crash and remove dry hops on Day 11.

BREWER’S NOTES
Add acidulated malt to adjust the mash pH to 5.2 (1 percent of acidulated to malt per 0.1 of pH reduction needed). We target a 5:1 chloride-to-sulfate ratio in our mash and shoot for about 155 ppm of chloride. We also find we like our beers with a firmer bittering charge than is often seen.

Author:

Jon A.

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: 1.066

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/9/2016 9:36 PM

Notes:

Author:

jimdubc

Boil Size: 2.75 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 1.25

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/21/2014 1:55 AM

Notes: Target FG is 1.012, attenuation of 85% will increase ABV. First brew turned really well...this is not a true clone but the hop bill is inspired by the real deal.

Substitute Centennial for Amarillo.

Author:

liquid bread brewery

Boil Size: 6 Gallons

Boil Time: 5

Boil Gravity: N/A

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/15/2012 5:10 PM

Notes: Honey is added at end of primary directly to fermenter and should be soft varietal like orange blossom.

1/2 minerals added at mash the other half added during the boil after sparging.

Lacto starter made with 2 gallons warm apple juice - 90 degrees plus. Pitch and let sit for one week. Add to primary when the yeast is pitched.

Ferment at 64 then let naturally rise into mid to high 70's to finish. Add honey/fruit after the malt has mostly finished fermenting. Keep honey ferment cool then let free rise after a few days. Add oak once most of ferment is done before racking for 5 days.

Total water needed is 6 gallons. Mash strike temp is 6 gallons at 130 degrees to hit protein rest at 120 for 15 min then raise for 45 minutes to 148 with Herms and then mash out at 170. Only collect first running's as all water added to mash. Collect 3 gallons after 90 min boil and add 1 gallon honey and 2 gallons Apple juice.

Author:

Djcpereira

Boil Size: 27 Litres

Boil Time: 60

Boil Gravity: 1.069

Efficiency: 75

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 21 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/17/2015 12:07 AM

Notes:

Author:

jessiepagan3

Boil Size: 7.92 Gallons

Boil Time: 90

Boil Gravity: 1.035

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/1/2017 9:01 PM

Notes:

Author:

Jb97

Boil Size: 26.5 Litres

Boil Time: 60

Boil Gravity: 1.036

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/6/2018 10:49 AM

Notes:
Add 500mg potassium metabisulphite to 20 gallons water to remove chlorine/chloramine (as required).
Water treated with brewing salts to: Ca=51, Mg=10, Na=16, Cl=71, S04=71
(Keeping the Cl:S04 ratio even for a balance between malt and bitterness, hitting the minimums on Ca and Mg).

Grind the roasted barley fine (I use a setting of 10) and add it after the 90 minute mash rest is complete. This avoids lowering the mash pH too far and reduces the chance of astringency which can occur from over-steeping highly roasted grains. Once the 90 minute mash is over, stop the mash pump, add the roasted barley, and give it a good stir to mix it into the existing grain bed. You need to stir well as otherwise the fine layer of powdery roasted barley on top may stop the flow. Start the mash pump again and continue with your mashout. The wort will be cloudy again but it will clear as the grain bed rises to mashout temperature over 20-30 minutes.

Try and use the recommended White Labs WLP-004 or Wyeast 1084 Irish Ale yeasts. While something like Fermentis Safale US-05 (American Ale / Chico) yeast can be substituted and works well, it's just not the same as it's a bit too clean fermenting and lacks some of the complexity.

Serve this beer with fairly low carbonation (the lower the better in my humble opinion, or even better, as a cask ale). If you have the means to serve it through a beer engine with no extra carbonation at all other than residuals left over from fermentation, do it! I think you'll really enjoy the difference. I serve mine on a stout faucet pushed by 30/70 C02/Nitrogen blend to get a nice creamy head and close to flat beer, exactly how Guinness is served on tap. One cheap and inexpensive way to (sort of) mimic this is to use a syringe. Pour the beer as you would normally and then suck up a syringe full and force it back into the beer, hard. Repeat 2-3 times and you'll knock most of the C02 out of solution leaving a nearly flat beer with a creamy head. Over carbonation destroys a lot of the subtleties of this beer. Don't over carbonate!

add 88% lactic acid to the beer after fermentation is done, before kegging. This is said to be what Guinness does today because it's cheaper, easier, and more efficient than relying on bacteria. All is takes is around 3-4 ml per 5 gallon keg. Go sparingly adding 0.5 ml at a time until the taste is to your liking. You can also use this method to do a trial run to see if you like the results: Once the beer is kegged and on tap, add 1-2 drops with an eye dropper to a 16 oz glass of beer and see what you think. 1 drop per 16 oz is equivalent to 2 ml in 5 gallons. Careful not to overdo it!