Homebrew Beer Recipes | Page 583 | Browse 315,000+ at Brewer's Friend

Author:

Ozarks Mountain Brewery

Boil Size: 14.5 Gallons

Boil Time: 60

Boil Gravity: 1.069

Efficiency: 80

Mash Thickness: 1.2

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/8/2016 3:46 PM

Notes: this is my altered version of Kals recipe changed for my system, you will need 4 to 6 packets of yeast

Author:

John Abrahamsen

Boil Size: 28.5 Litres

Boil Time: 90

Boil Gravity: 1.053

Efficiency: 70

Mash Thickness: 3.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 19 ° C

Priming Method: Sucrose

Priming Amount: N/A

Creation Date: 8/15/2016 4:34 PM

Notes: Start 19C, ramp up to 22c over 5 days.
CBC-1 carbonation yeast if bottling.

Author:

Tony Giannasi

Boil Size: 6.00001 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/24/2011 1:43 AM

Notes:

Author:

Darren3369

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.06

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 5/21/2021 4:15 PM

Notes:

Author:

MeemoNZ

Boil Size: 30 Litres

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 75

Mash Thickness: 3.2

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/12/2021 8:29 PM

Notes:

Author:

HopMantis Brewing Co

Boil Size: 18.73 Gallons

Boil Time: 60

Boil Gravity: 1.059

Efficiency: 78

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 67 ° F

Priming Method: co2

Priming Amount: 7.22 psi

Creation Date: 11/24/2020 1:11 PM

Notes:

Author:

Joe 6-pack

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: 5 oz

Creation Date: 3/9/2019 3:06 AM

Notes: 3.5 oz sugar was calculated from PB fit ingredients (coconut palm sugar - 2g/serving x 50 servings)

I double milled the grains this time - O.G. was 1.080 (gained efficiency)!

Make 1.5L starter using 5 oz DME

Add second addition of PB fit according to flavor in gravity samples - still add cocoa nibs 3 days before bottling (maybe)

Author:

biergato

Boil Size: 4.7 Gallons

Boil Time: 90

Boil Gravity: 1.051

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 95 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/28/2018 3:08 AM

Notes:

Author:

gozer

Boil Size: 26 Litres

Boil Time: 30

Boil Gravity: 1.033

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 17 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/4/2018 7:30 PM

Notes: House Bitter. Usually served on nitro.

Author:

SDBREW

Boil Size: 6.25 Gallons

Boil Time: 60

Boil Gravity: 1.023

Efficiency: 35

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/19/2018 5:46 PM

Notes: This recipe is for mash and boil brew system. Add 4.5 gal water and set temp to 162 degrees. Once heated, add grain and set temperature to 150 degrees. Mash for 1 hour. 20 minutes before mash out, heat sparge water to 168 degrees. Lift grain from kettle and add sparge water to get 6.25 gallons in Brewer's edge kettle. Turn temperature to 218 degrees and remove grain. Boil hops according to hop boil guidelines.

Author:

Flying Weasels Home Brewery

Boil Size: 44 Litres

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 60

Mash Thickness: 3.3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/10/2018 3:51 PM

Notes: Recipe for a classic Bohemian Pilsener

This is a 38L batch. Two 5-gallon fermenters, not the FastFermenter. It's too much work to only yield 26L.

It's a decoction mash too, so you need to have a second burner and a s/s pot that will hold up to 10L or so. Try to organize it so that the 2nd burner is close to the mash tun. You will have to carry 10L of hot steaming mash back and forth!

I BOUGHT A NEW S/S pot, with about twice the capacity as my current one so I can do larger decoctions without worry. So consider modifying the steps to start with a larger volume in the mash tun, which would require larger decoctions.

BUY A 3.5 Kw Induction Heater instead of using the gas burner. Safer, easier, and probably faster.

**YEAST**

My preference is ESCARPMENT LABS CZECH LAGER LIQUID YEAST but any true lager yeast could be used.

Set up a starter two days before the brew. It should follow the "Pro Brewer 1.75 lager" setting on the BF Yeast Calculator. Normally a two-step starter is required.

Note: increasing efficiency for this recipe. 55% is too low. For SaltMines5, it predicted 1.049 and I got 1.060. I've set it to 60%
and dropped total grist by .5 Kg.
**GRIST**
Increased it a bunch with salt mines 4, but maybe too much so, as I just said above, I'm dropping it by .5 Kg. Looking to get around 1.052, but I'm still cheating on the high side. Dial it in closer in the future. (SALT MINES 7 was very close to 1.052.)

700g acid malt is what was required for SALT MINES 7 and I still didn't get to 5.2. I've set this master to 700g but monitor this too.

**DECOCTION MASH**

Use mash cheat sheet at google drive in my beer and brewing folder.

Dough in (protein rest) and first decoction
-------------------------------------------------------------
* Bring HLT to 134F and dough in 19L.
* - Strike temp = 122 °F (50 °C). Hold for 10 minutes (maintain until return of first decoction)
* Pull a thick decoction: one-third to one-half the mash; s/s pot is ~80% full and weighs ~ 9.4 (10.9 Kg minus tare of 1.5)
* Heat the decoction to 150°F; hold for 10 minutes
* Heat the decoction to 162°F; hold for 10 minutes
* Heat the decoction to a boil; boil for 20 minutes. ('boil' means visible boil plus 208F thoughout, with lots of stirring.)

Beta Amylase rest and second decoction
-------------------------------------------------------------
* Return the decoction to the mash, strike temp = 144–147°F ; hold 15 minutes (Maintain with HERMS, if necessary, until return of second decoction.)
* Pull a second thick decoction one-quarter of the mash; s/s pot is ~65% full and weighs ~7.5 (9.0 Kg minus tare of 1.5)
* Heat the decoction to 162°F; hold for 10 minutes.
* Heat the decoction to a boil; boil for 10 minutes.

Alpha Amylase rest and mashout
-------------------------------------------------------------
* Return the second decoction to the mash, strike temp = 158°F; hold for 30 minutes.
* Use HERMS to raise temp to mashout 170F
* get a sample before you sparge. (For SaltMines5, the gravity was 1.096 at this point!)
* Sparge and lauter as usual

**HOPS**

Use 450 alpha points (my system - g * AA%) or 16 AAU (BF system - ounces times AA%) or 30 IBU (BF-reported) of a noble hop. Normally Saaz or Hallertau. Ideally, all of those values should line up with the same values.

Do the first wort hopping thing (https://byo.com/article/first-wort-hopping-techniques):
Take a quarter of your bittering hops and toss them in the kettle as soon as there is wort heating in it. Don't wait for it to reach a boil. Throw the rest in when it reaches a boil, and boil for the usual 60 minutes.

**FERMENTATION**
This recipe has occasionally had problems with sluggish fermentations. And DMS issues. Consider krausening in the future as a remedy for such problems. https://byo.com/mr-wizard/krausening-for-homebrewers/

Author:

Tverbrewer

Boil Size: 24 Litres

Boil Time: 60

Boil Gravity: 11.4

Efficiency: 61

Mash Thickness: 4

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/1/2016 8:19 AM

Notes:

Author:

Dougie Orr

Boil Size: 28.5 Litres

Boil Time: 90

Boil Gravity: 1.036

Efficiency: 75

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/6/2016 9:22 AM

Notes: OG 1042
Expected FG 1010
Actual FG

Author:

Happenstance Brewing Company

Boil Size: 8 Gallons

Boil Time: 90

Boil Gravity: 1.073

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 64 ° F

Priming Method: Corn sugar

Priming Amount: N/A

Creation Date: 1/6/2014 4:21 PM

Notes: Christmas Pyre Ale

Sacch rest at 150F for 60 min. First wort hops added at 160F. Boil. Kill the flame, add whirlpool hops and Fir needles (2 cups volumetrically), swirl and cover for 45 minutes. Aroma hops added at 160F during chill. Chill rapidly, aerate, ferment at 64F for 14 days or so. Cold crash for 2 days to 35F, rack, fine, re-rack, and then bring back to 70F for dry hopping. Four day 2 stage dry hop. Bottle and condition for 21 days at room temps.

Author:

Kjellinn

Boil Size: 160 Litres

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/21/2017 6:45 PM

Notes:

Author:

ann4PAWS

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.038

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 65 ° F

Priming Method: bottle

Priming Amount: 5 oz priming sugar

Creation Date: 5/28/2017 7:26 PM

Notes: OG-1.060 after 1 gallon H20 addition

Author:

andete

Boil Size: 4.5 Litres

Boil Time: 90

Boil Gravity: 1.017

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/20/2015 5:46 PM

Notes: 1 third of LIPA I Base dry hopped with Sorachi Ace hops.

Author:

ChemEBeerGeek

Boil Size: 600 Litres

Boil Time: 90

Boil Gravity: 1.043

Efficiency: 85

Mash Thickness: 3.14

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 11/6/2019 5:49 AM

Notes:

Author:

enyapfc

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.035

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: corn sugar

Priming Amount: .75 cup

Creation Date: 4/26/2015 4:08 PM

Notes: acidulated malt to be separate from rest of bill
Alternative yeast Wyeast 1007 (German Ale) yeast
alternative to Santiam hops?
cool to 68°, pitch yeast in primary fermenter
primary for 5-7 days then secondary (split into two secondaries add cranberries (1 lb? to one vessel)