Homebrew Beer Recipes | Page 591 | Browse 315,000+ at Brewer's Friend

Author:

Happenstance Brewing Company

Boil Size: 7.25 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: Corn sugar; Safale 05

Priming Amount: 2.8 oz for 6+ mos.; 1 rehydrated packet

Creation Date: 12/3/2012 3:47 PM

Notes: Mash at 154F for 60 min.
Sparge, add corn sugar and boil for 90 minutes.
Ferment at 67F for 17-21 days.
Rack to secondary and let sit for 6 weeks (conditioning) at 67F.
Hydrate Safale 05 in a cup of water, pitch with corn sugar (priming), bottle and then let sit at 67F. Sit for at least 6 months, aiming to try a year from brew date.

Author:

SchuBrew

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.07

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/7/2016 9:22 PM

Notes:

Author:

kniht

Boil Size: 5 Gallons

Boil Time: 90

Boil Gravity: 1.091

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/4/2016 4:14 AM

Notes:

Author:

C-vall

Boil Size: 25 Litres

Boil Time: 120

Boil Gravity: 1.093

Efficiency: 70

Mash Thickness: 3.65

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 22 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/13/2015 11:11 AM

Notes:
31 liter mäsk 25 liter kok

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 60 ° F

Priming Method: Force Carb

Priming Amount: N/A

Creation Date: 9/2/2015 3:26 AM

Notes:

Author:

square toast

Boil Size: 27 Litres

Boil Time: 70

Boil Gravity: 1.04

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/17/2015 10:46 AM

Notes:

Author:

Brewing Bard

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/28/2012 7:01 PM

Notes:

Author:

Tim Fuller

Boil Size: 12 Litres

Boil Time: 60

Boil Gravity: 1.07

Efficiency: 60

Mash Thickness: 2.8

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/4/2016 2:09 AM

Notes:

Author:

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.051

Efficiency: 75

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/31/2018 1:35 AM

Notes: Sub yeast: WLP 500 (Monestary Ale)

Pitch the yeast with the wort temperature at or just below the minimum recommended temperature (65F) and let it rise slowly over the next 4 days to the high end of the range (upper 70s). This will help balance the variety of flavors that a particular yeast is capable of producing at different temperatures. Yeast can generate heat up to 7-9 degrees above the ambient temperature during fermentation, so you need to keep the ambient temperature below the minimum fermentation temperature for the first couple of days so the wort does not get too warm too fast.

Author:

west1m

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/12/2020 8:38 PM

Notes: Yeast had expiration date a month ago , I had two packages so I added both. Tossed them in some RO water as the package suggested and about 1/2 hour later it was crawling out of the jar so I guess it was good.
I just buy kits from Northern Brewer, I add one extra pound 2 row to the kit to meet the Original gravity. This time it I came out about 8 points high...

Author:

thunderaxe

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 72

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/1/2021 4:46 AM

Notes:

Author:

Gulating Tromsø

Boil Size: 31.29 Litres

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 70

Mash Thickness: 3.14

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 21.1 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/5/2021 8:49 AM

Notes:

Author:

DavidHume

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: 1.052

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 73 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/26/2015 5:55 AM

Notes: 3/2/15: Brew day.

Steeped specialty grains for 20 minutes in 2.5 gallons of distilled water, starting at 154ºF. Turned off the burner. After 10 minutes, the temperature dropped to 144ºF, so we relit the burner and it hit 152ºF by the time we removed the grains. We let them drip until only one drop per second fell.

Added 3 gallons of distilled water and 20 ounces of light DME. Let temperature rise to 175ºF and added ~5 more ounces of light DME.

Once the water boiled, we added 6 pounds of light LME, which we had let sit out of the fridge for 36 hours and had soaked in hot water for 10 minutes. Added 1 ounce US Fuggles pellets loosely contained in a hop sock. Boiled for 70 minutes, since the addition of the (non-active) immersion chiller stopped the boil for 7 of the last 10 minutes of the original 60. At 10 minutes, added 1 tablet WhirlFloc.

Chilled to 75ºF using immersion chiller, aerated for 20 seconds, and added solid stopper. Gravity of 1.058. Transported 25 miles in a car.

Aerated for another 20 seconds and pitched a smack pack of Roeselare, as well as the bottle dregs from Hanssens Artisanaal Oude Kriek, Boon Oude Geuze Mariage Parfait, and Tilquin's Oude (Gueuze Tilquin)².

Installed blowoff tube and left in closet to ferment at ambient temperature of 66ºF.

24 hours later fermenting vigorously. Internal temperature 74-75ºF, ambient temperature has gone up to 68ºF after 2 days.

3/6/15: Fermentation has slowed significantly, temperature has dropped down to 72ºF, and blowoff activity has been reduced to every 3 seconds.

3/26/15: Racked to secondary. Quite clear, with a mildly tart, fruity aroma. Washed 1.5 quarts of yeast slurry for use in a future batch.

4/19/15: Added 1 ounce of Burgundy-soaked oak cubes.

10/29/15: Pulled a sample. Gravity 1.006. It smells like the rubber stopper, which I replaced with a silicone one. (Note to self: Never age something long-term with one of those again!) Body was medium, with a slightly higher carbonation level and (perceived?) acidity level than my other sour. Minimal funk, slight fruit; somewhat boring. This one will probably get some fruit to liven things up if the acidity doesn't increase.

Author:

Satcom221

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: 1.037

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/21/2014 3:06 AM

Notes: Ferment 10 days at 64-68 degrees

Author:

Happenstance Brewing Company

Boil Size: 7.75 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: Turbinado

Priming Amount: 3.25 oz

Creation Date: 11/16/2012 9:04 PM

Notes: malt bill swiped from: http://www.prettythingsbeertoday.com/wp/2011/new-beer-alert-once-upon-a-time-december-6th-1855-east-india-porter/

my attempt at an East India Porter - courtesy of the amazing Ron Pattinson.

Author:

Boil Size: 3.5 Gallons

Boil Time: 30

Boil Gravity: 1.038

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/29/2016 11:16 PM

Notes:

Author:

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 17 ° C

Priming Method: Açucar

Priming Amount: 6g/l

Creation Date: 2/3/2017 2:02 PM

Notes: -Não esquecer de fazer infusão a 45C somente com centeio
-Adicionar o restante do malte somente com 67C

Author:

zknipe

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.034

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 69 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/5/2018 5:39 PM

Notes:

Author:

The Loddon Valley Brewer

Boil Size: 29 Litres

Boil Time: 60

Boil Gravity: 1.037

Efficiency: 75

Mash Thickness: 3.13

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 18 ° C

Priming Method: co2

Priming Amount: N/A

Creation Date: 7/31/2023 2:19 PM

Notes: This recipe has been derived from an actual brew log from Fullers Griffin Brewery in Chiswick, London in 2018 and which I have had the pleasure to have done the brewery tour on many occasions! The original brew log had a grain bill of over 15000kg and hop bill of over 90kg and I have scaled them down to produce this recipe with a finished volume of 25 litres. The original brew log ingredients were Simpsons Pale Malt, Light Crystal malt, chocolate malt, Target hop pellets, Nothdown, Challenger and EKG hop pellets, but fullers don’t stick to the same malts each time, but whatever makes are available. If you want a really authentic clone, then use the Wyeast 1968 ESB yeast and don’t let the temperature get too high or you’ll get too much fruit. Fullers start the ferment at 16°c, then let the temperature rise naturally to max 20°c. If you want to keg and keep at fridge temperatures then don’t go below 6°c or you will loose the delicate flavours. Also don’t over carbonate. Leave the brew in the keg at a low carbonation level of around 0.5 to 1 psi and then use CO2 to push the beer out if needed. If you carbonate it too much you will again loose the delicate malt and hop flavours.

This brew was cold crashed for 3 days then kegged and fined with gelatin. Served at 6/7°c from my Keggerator. Works just as well if not better at cellar temperature, but it’s a matter of choice.

Standard Burtinisation for the brew liquor

These are my last tasting notes for this brew:
Just kegged the brew and drew off a sample to try. Lovely amber colour, floral hops on the nose and full bodied and malty, with a soft mouthfeel and lovely floral green hop flavour, just like London Pride! Bitterness is prefect and clean and lingers a while due to those Target bittering hops. Slightly more fruitiness than LP, but that will be due to the fermentation temperature as it rose to 21°c. Brew is about 98% clear already which is due to the excellent ESB yeast which is very flocculant and clears down quickly.

My mates, all Brits and lovers of London Pride, were blown away by this brew. They struggled to believe that I’d made it in my kitchen at home!