Extract Homebrew Beer Recipes | Page 30 | Browse 30,000+ at Brewer's Friend

Author:

Boil Size: 3 Gallons

Boil Time: N/A

Boil Gravity: 1.085

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/1/2022 9:38 PM

Notes: from https://brewtogether.com/2019/10/05/homebrewed-cider/:

-Add the 4 gallons of pasteurized apple cider or juice and 2 containers of the guava nectar to a sanitized carboy.
Pitch the yeast according to the instructions on the packet.
Ferment for approximately 21 days. Fermentation will be rapid for a few days and then slow for a couple of weeks. Ferment completely dry.

-Once fermentation has stopped and you have taken a gravity reading to make sure it’s done, you’re ready to keg the cider (if you don’t keg, jump down a few paragraphs to the bottling instructions).

-Rack from carboy into cleaned/sanitized keg.

-Add 1/4 tsp to 1/2 tsp of Potassium Metabisilfite to the keg. Purge the headspace from the keg with Co2 and cold crash.

-Wait 24 hours.

-After 24 hours, add 2.5 tsp of Potassium Sorbate. You need to wait the 24 hours so that you have some sulfite in the cider before you add the sorbates or you will end up with some off flavors. Purge the headspace in the keg a couple of times with Co2 and cold crash.

-Wait 3 days.

-After 3 days, backsweeten with 1-2 containers of thawed frozen apple juice concentrate (to taste) and 2 containers of the Goya Guava Nectar.

-Seal and purge the airspace in the keg, then put it under pressure to begin carbonation. I just carbonated it slowly at about 10-12 psi, which worked perfectly for it.

-It’s drinkable pretty much immediately, but if you can wait 3-4 weeks it will improve substantially in flavor. You may have sediment settle at the bottom of your keg. If you find the first pint is a slushy ugly pink mess, pull another pint or two before worrying too much – I had to pull about 20 oz before it got to the good stuff.

-Enjoy

Author:

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.134

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.5

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/23/2016 8:11 PM

Notes: Easy recipe to follow.

Boil your partial water (RO water) - about 2.5 gal.
Add liquid malt with flame off.
Add first hop addition
Add second hop additon.
Add whirlfloc tablet if you want, I didn't and it was very clear.
Cool to about 80 deg. Add cold RO water to fermenter and then add the wort. Add water to fill fermenter to top.
Check temp to match with yeast.
Add yeast.
Ferment about 70 for 2 weeks or a couple days after FG gets close to 1.01.
Transfer to keg.
I cooled the keg to 32deg for 3 weeks but it can be drunken in a week or two.

Author:

bowlerhattedman

Boil Size: 3.5 Gallons

Boil Time: 60

Boil Gravity: 1.076

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 69 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/13/2015 7:41 PM

Notes:

Author:

Nosybear

Boil Size: 3.25 Gallons

Boil Time: 15

Boil Gravity: 1.048

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/7/2018 3:12 PM

Notes:

Author:

rknodel

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.07

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/19/2014 8:05 PM

Notes:

Author:

Brew Lab

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.12

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/26/2015 4:53 PM

Notes:

Author:

Spanky's Brew House

Boil Size: 3.5 Gallons

Boil Time: 90

Boil Gravity: 1.061

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: Corn Sugar

Priming Amount: N/A

Creation Date: 12/3/2016 10:54 PM

Notes:

Author:

Toup

Boil Size: 2 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 25

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/12/2012 3:22 PM

Notes:

Author:

chippola

Boil Size: 3 Gallons

Boil Time: 45

Boil Gravity: 1.08

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.5

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/15/2015 11:01 PM

Notes:

Author:

G8rPants

Boil Size: 2.8 Gallons

Boil Time: 60

Boil Gravity: 1.064

Efficiency: 25

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/29/2016 12:51 AM

Notes:

Author:

dorseymw

Boil Size: 4.2 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: dextrose

Priming Amount: 1 cup

Creation Date: 7/7/2012 6:48 PM

Notes: Brew as normal. Primary fermenter for 2 weeks, dry-hop in secondary fermerter for 1 week.

Was a bit worried that I added too many hops and it would transform to an IPA, but that definitely did not happen.

Slight hop aroma, but is nice. Distinctive bitterness, though not overwhelming. Smooth, dry, with a nice creamy head. The color is a dark gold and cloudy, especially when chilled. Refreshing, especially on a hot day. Overall a delicious, easy to drink, summer beer. A nice American pale ale with bursts of hop flavor.

Author:

Genus Brewing

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.076

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/6/2016 6:58 PM

Notes:

Author:

wvhopdropper

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: 1.029

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.25

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/5/2017 12:18 AM

Notes:

Author:

Barrel guy

Boil Size: 7.25 Gallons

Boil Time: 60

Boil Gravity: 1.037

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/17/2016 7:50 PM

Notes: OK, the ibu's are defiantly beyond the pale, but it's less than the My Rye PA recipe and way less the the Hop Diggity Rye PA recipe.
The LME is Williams Brewing # M14 America Rye blend. This blend includes Pale malt, Rye malt and Crystal malt.
With 15 minutes left in the boil I turned off the burner a n d stopped the timer. I added the DME and Whirlfloc tablet and stirred until dissolved. I added the wort chiller to the kettle, turned on the burner, brought it back to a boil and restarted the timer.

Author:

Michele

Boil Size: 2.64172 Litres

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/13/2013 11:07 AM

Notes:

Author:

stuttle

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/21/2014 1:30 PM

Notes:

Author:

EvanAltman36

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: 1.072

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.0

Primary Temp: N/A

Priming Method: Kreamyx

Priming Amount: N/A

Creation Date: 2/28/2013 3:07 PM

Notes: This is a nice dark beer for those days when the weather is really starting to get cold. You're going to need something that sticks, something with body. With biscuit and roasted malts, this is a full-bodied brew, and the smoked and chocolate malts will add depth and heartiness as well. Throw in some flavors of coconut (unsweetened, toasted at 325 for ~20 minutes), chocolate, and vanilla, and you've got the feel of a cold hot chocolate too. The spicy, leathery bitterness from Perle hops remind us that baseball season is not too long gone, while the milder floral characteristics of the Hallertau carry hope for the new season that's still just a little too far away. 1.5L starter will give proper pitch rate. Use Coconut extract and Dark Cocoa powder like a dry hop and add after fermentation is complete.

Author:

nheitkamp

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.088

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/18/2015 1:28 PM

Notes: 1. Boil 1/2 cup water, cool, then start yeast
2. Place the cracked grains in the muslin bag(s) and place in a pot with 2 gallons of cold water. Add gypsum. Bring the water temperature up to 150 degrees F. Steep the grains for 30 minutes remove and discard the grains.
3. Add the extracts into the pot and stir to thoroughly mix the extract into the water.
4. Bring the liquid to a boil.
5. At the 30 minute mark, add the boiling hops slowly to the pot.
6. At the 45 minute mark, add the Irish moss to the pot.
7. At the 60 minute mark, remove the brew pot from the stove. Cool the wort using an ice bath or a wort chiller.
8. Transfer the chilled wort to a sanitized fermenter. Add enough cold water to bring the total volume up to 4 gallons.
9. Add yeast nutrient, enzyme and dextrin
10. When the temperature of the wort drops to below 85 degrees, add the yeast.
11. Place the airlock onto the fermenter.
12. After primary fermentation has completed, transfer the beer to the secondary fermenter, add isinglass (optional)
13. After secondary fermentation has completed, dissolve corn sugar in minimum amount needed of water, bring to a boil.
14. Transfer beer from secondary fermenter to bottling bucket. Add cooled priming sugar solution.
15. Transfer beer to sanitized bottles & cap. Allow 7-10 days for carbonization to complete.

Primary for 5 days?
Secondary 3 days?

Either freeze fruit and add at the end of the boil or puree it, freeze it, and add to secondary. (Secondary will give more fresh fruit/juice flavor where end of boiling will be more subtle).

Author:

StueyinDeep

Boil Size: 6 Litres

Boil Time: 50

Boil Gravity: 1.192

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/3/2016 1:51 AM

Notes:

Author:

Ben Miller

Boil Size: 3.15789 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/18/2012 9:24 PM

Notes: 3 lb DME - Bavarian Wheat Malt Extract from Briess
3 lbs DME - Pilsen Light
1oz. Liberty hops
.5. Saaz hops
6lbs strawberries
40oz rhubarb
1lb cane sugar
Yeast: German Wheat 3333 - High flocculation, 73-77% attenuation, 63-75° ferm temp. Sharp, tart crispness, fruity, sherry-like palate.

Add 3 gallons of water to pot and bring to boil.
Take off of heat and add DME while stirring.
Bring back to boil for 70 min.
Add .5oz Liberty hops (70 min)
Add .5oz Saaz hops (30 min)
Add .5oz Liberty hops (10 min)
Take off of heat, let cool, to 70def F. Add ice cold water to help cool. Transfer to primary and bring volume to 4 gallons. Pitch yeast. Initial Gravity: 1.074
Primary: Two weeks

After two weeks, transfer to secondary. Steep all fruit for one hour, mashing up as fine as possible. Add sugar to mixture. When cooled, add to secondary. Two weeks later, bottle with 3/4 cup priming sugar.

At bottling - murky golden color with a redish hue from the fruit. Nice strawberry flavor that's not over-powering with just a bit of tart from the rhubarb. Deceptively strong, as well!