All-grain Homebrew Beer Recipes | Page 63 | Browse 230,000+ at Brewer's Friend

Author:

daves1186@gmail.com

Boil Size: 13 Gallons

Boil Time: 15

Boil Gravity: 1.028

Efficiency: 60

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/16/2014 6:17 PM

Notes: After mash is complete add lactic acid until Wort P.H = 4.2
Sour Wort @ 120 deg. until Ph drops to 3.4
Boil for 15 minutes
Ferment @ 63deg for 5days, finish @ 169deg
Age on White Labs - Saccharomyces "Bruxellensis" Trois for 4-6 months

Author:

Chris Gibson

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/11/2016 11:40 PM

Notes:

Author:

Genus Brewing

Boil Size: 7.4 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/17/2020 10:56 PM

Notes:

Author:

Speckled Pig

Boil Size: 40 Litres

Boil Time: 60

Boil Gravity: 1.029

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 22 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/15/2015 9:18 AM

Notes: Mash in at 65 degrees.

You will have to research how much strike water you require for 6kg of malt in the robobrew.

Once 60 - 90 min mash is complete you will need to sparge (Rinse the grains with sparge water @ 70 degrees).

You will probably need to sparge until you hit about 25-27L of wort, you dont know the evaporation rate so you will need to estimate so that you finish with at least 23L of wort.

I recommend Niall joining the robobrew facebook page as they will be able to help out with the measurements of water etc.

Author:

MarcBrew

Boil Size: 6.2 Gallons

Boil Time: 90

Boil Gravity: 1.063

Efficiency: 63

Mash Thickness: 1.6

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/15/2016 2:02 AM

Notes: ferment @ 68degrees for 2 weeks. Rack. Cool condition @ 50 degrees for 2 weeks. Raise to 68 degrees for 1 week. Keg

Author:

taylor perry

Boil Size: 6 Gallons

Boil Time: 20

Boil Gravity: 1.045

Efficiency: 70

Mash Thickness: 1.3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/1/2018 8:19 PM

Notes:

Author:

lev

Boil Size: 26 Litres

Boil Time: 90

Boil Gravity: 1.042

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/1/2013 9:53 PM

Notes: Best bitter in class, stithians show 2012

Author:

pietrok22

Boil Size: 8.33 Gallons

Boil Time: 60

Boil Gravity: 1.068

Efficiency: 65

Mash Thickness: 1.35

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/13/2015 12:37 AM

Notes:

Author:

Boil Size: 8.5 Gallons

Boil Time: 90

Boil Gravity: 1.04

Efficiency: 79

Mash Thickness: 3.48

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 2.0

Primary Temp: 46 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/10/2016 7:05 PM

Notes: This is the re-brew of a Pils that placed 3rd in the 2018 NHC first round in San Diego. The goal was something similar to Ayinger's Bavarian Pils. This beer was lucky enough to place 1st in the 2018 NHC Final Round.

Note: the Pils malt used in this recipe is Weyermann Barke Pils. Give it a try.

Additional fermentation/lagering notes: with the high pitch rate this beer completes primary fermentation (aka gravity stabilizes) in less than 10 days at which point you can keg it. On about day 7 or 8 I let it rise to a maximum of 62F to make sure it gets to terminal gravity. I lagered it in my keezer at 38F for 4-5 weeks, but if the brewday and fermentation went well it will taste very good sooner than that. If you use gelatin as I do it will taste great by 2 weeks in the keg.

Author:

Sohan

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.036

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/29/2017 12:33 PM

Notes:

Author:

lautaroooo

Boil Size: 370 Litres

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 63

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/27/2016 2:47 PM

Notes:

Author:

Tribe44

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.027

Efficiency: 78

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 50 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/5/2015 3:22 AM

Notes:

Author:

rolandblais

Boil Size: 1.2 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 78 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/6/2013 1:52 AM

Notes: Based on Jalapeño Saison, but minus the jalapeño, and adding 2 lbs of peaches in the secondary. Hoping for a Festina Peche taste-alike...

Author:

Sergio Rivera

Boil Size: 7.25 Gallons

Boil Time: 60

Boil Gravity: 1.036

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/17/2016 12:57 AM

Notes:

Author:

emcfarden

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/21/2019 2:39 PM

Notes: Ferment primary for 7 days or until gravity is at desired FG. Rack beer into secondary directly on the frozen fruit. Sanitize fruit bags before adding and leave fruit whole (no crushing or blending) for sanitation.

Leave in secondary for 1-2 weeks then keg.

Author:

SonnyK85

Boil Size: 7.75 Gallons

Boil Time: 90

Boil Gravity: 1.041

Efficiency: 76

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 67 ° F

Priming Method: Corn Sugar

Priming Amount: N/A

Creation Date: 3/26/2017 2:51 PM

Notes: ** YEAST STARTER **

1. Approximately 4 Days prior to Brewing, make 10% DME solution in Erlenmeyer Flask.

MFG Date: ___/___/______
Starter: _____ gm DME / _____ L (per MrMalty.com)

2. Apply Ice Bath until Temperature reaches ~70F.
3. Squeeze 1 packet of WLP570 into DME Solution.
4. Cover with Aluminum Foil + apply to Stir Plate for 18 hours.
5. Refrigerate for ~72 hours prior to brewing.

** MASH **

PRE-HEAT MASH - 2 gal of Boiling Water
PRE-HEAT SPARGE - 2 gal of Boiling Water
(conduct Simultaneously)

Water Volume: 4.3 gallons for 1.5 lb/qt ratio.

1. Prior to heating HLT, check pH of tap water

pH: __________

2. STRIKE WATER: 163F.
3. Prior to adding Grains, add 2mL LA into Strike Water.
4. Add Grains @ 161F.
5. Allow Temperature to fall to 151F prior to closing lid.
6. Check Mash pH ~15 minutes into Mash.

pH: __________

7. Total Mash Time: 60 minutes

FINAL MASH TEMP: __________F
FINAL MASH pH: __________

8. Add 1.5gal of Boiling Water at the end of Mash and stir into solution
9. Begin Vorlauf!

** SPARGE **

1. Add 6.5gal of water + Kettle salts to Pot. Prior to heating, adjust pH to </= 6.0 with Lactic Acid

Lactic Acid addition: __________ mL
Final pH measurement: __________

2. Heat 6.5gal of Water to 175F. Add to Sparge Vessel.
3. Recirculate 4 times prior to collecting wort.
4. Attempt to Sparge over 40 minutes, collect 7.75gal into boil kettle.

** BOIL **

1. Check Pre-Boil Gravity (goal: 1.041) + pH
** NOTE: Make sure to adjust for TEMPERATURE **

PRE-BOIL GRAVITY: __________ @ __________F

2. Adjust Gravity to Goal (1.041)

Adjusted Gravity: __________ (__________ @ __________ F)

PRE-BOIL pH: __________

3. Adjust Pre-Boil pH to: ~5.2 (+/- 0.1)

Final pH measurement: __________
Lactic Acid addition: __________ mL

4. Boil for 90 minutes (goal OG: 1.063)
5. Add Tettnanger Hops @ 60 minutes.
6. Add Sugar @ 15 minutes.
7. Add 1 crushed Whirlfloc tablet @ 5 minutes.
8. Chill wort to ~70F after completion of Boil
9. Auto-siphon wort from Kettle into Mash Cooler with fine mesh bag attached (at the end of auto-siphon)
10. Gravity feed 5.25gal (5gal mark) of wort from Mash Cooler into Catalyst Fermenter
11. Allow Ranco/Chest Freezer to adjust wort temperature to goal starting temp

ORIGINAL GRAVITY: ______________ (goal: 1.063)

** FERMENTATION **

1. Goal Starting Temp: 67F
2. Begin Fermention @ 67F. After ~24 hr of noticeable Fermentation activity, raise the temperature by 1°F / 12-24 hours (max temp: 80F) by the end of 1 week.
3. Allow yeast to flocculate and beer to clear prior to bottling.

** PRIMING **

"carbonate to approximately 3-4 volumes CO2"

Author:

Ozarks Mountain Brewery

Boil Size: 8.5 Gallons

Boil Time: 90

Boil Gravity: 1.045

Efficiency: 80

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 60 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/28/2014 8:06 PM

Notes: you can use any yeast, they say use Conan Yeast but you can't buy it so any British style yeast will do

you will need 400 billion cells of yeast so 4 packets dry or 2 with a good 1.071 starter

Split dry hop in half and add half on day 14 and day 21. Carb on day 25.

Author:

Steven Gallagher

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.053

Efficiency: 75

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 69 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/9/2015 7:41 PM

Notes:

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.031

Efficiency: 75

Mash Thickness: 1.33

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/8/2020 8:23 PM

Notes:

Author:

Ulfrpsion

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 35

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/5/2015 3:23 PM

Notes: Raisin, Dates, and Honey:
Honey should be added with dates and raisins along with molasses. Recipe pending.

Oak Chips should be left for no more than 3-4 days. Taste regularly to validate completion.

Vanilla beans were prepared by cutting the length of the bean, and gutting the pulp, and then cutting the bean into small subsections. Then, both the bean and the pulp were placed in a small sterilized container with grain alcohol for 5 days. After 5 days, the entirety of the container was poured into the beer and it was left to sit for 4 days. It should be left for much longer as the vanilla flavor disappeared over time, perhaps tossed in at bottling.

Lactose was added to the beer 1 month before bottling. The lactose sugars were boiled in water for 15 minutes, and then tossed into the final product during racking. The lactose was stirred into the beer. This process is best done at keg application or bottling where the beer will not rack off the lactose sugars for maximum effect.

Briess Midnight Wheat Malt - Maillard Malts™
(Alternate for Dark Malt/Black Patent)

Use Dingemans Special B® Malt for the Special B.

Grain Profile:
UK Crisp Roast Barley - <10% - Adds color and dry flavor. Red and black color notes.
Special B - <10% - burnt sugar, raisin, and dark dried fruits. Adds red color.
Marris Otter Pale - Up To 100% - Adds nut flavor. Bulk sugars.
Bries Ashburne Mild - <50% - Base malt. Adds extra sweetness.
Midnight Wheat (Replace with BlackPrinz) - <10% - Adds smooth mouthfeel with a soft roast flavor.