Homebrew Beer Recipes | Page 2096 | Browse 310,000+ at Brewer's Friend

Author:

krakah

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.082

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/19/2017 2:54 PM

Notes:

Author:

Wolf Pack Brewing

Boil Size: 37.63 Litres

Boil Time: 90

Boil Gravity: 1.07

Efficiency: 72

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 20 ° C

Priming Method: co2

Priming Amount: 1.64 bar

Creation Date: 12/23/2020 4:46 PM

Notes: https://shop.theelectricbrewery.com/pages/kern-river-citra-double-ipa

http://www.thebrewingnetwork.com/post1668/

In this episode of Can You Brew It, Jamil and Tasty attempt to clone Citra Double IPA from Kern River Brewing Company in Kernville, CA. This wonderful craft beer took gold at the Great American Beer Festival in 2011 and has racked up many other awards as one of the best double IPA’s on earth. Tune in and find out if Tasty was able to homebrew this hop monster of a beer.

Needs a 2L Starter using 200g of DME

https://shop.theelectricbrewery.com/pages/kern-river-citra-double-ipa

add 500mg potassium metabisulphite to 20 gallons water to remove chlorine / chloramine (if required).
Water treated with brewing salts to our Hoppy flavour profile: Ca=110, Mg=18, Na=16, Cl=50, SO4=275 (Basically Randy Mosher's ideal Pale Ale numbers with slightly less Sulphate). For complete details on how to adjust your water, refer to our step by step Water Adjustment guide.
1.25 qt/lb mash thickness.
Single infusion mash at 148F for 120 mins.
Raise to 168F mashout temperature and hold for 10 mins.
~90 min fly sparge with ~5.6-5.8 pH water (measured at mash temperature). Collect 13.9 gallons.
Milwaukee MW102 pH meter
MORE INFOBoil for 60 minutes, adding Whirlfloc and hops per schedule.
After boil steep / whirlpool for 20 minutes with the lid on. (No need to stir, steeping is fine. Hop oil extraction is a function of contact time and temperature, not motion).
With the lid still on, cool the wort quickly to 67F (we use a one-pass convoluted counterflow chiller to quickly lock in hop flavour and aroma) and transfer to fermenter.
Aerate well. Pure oxygen from a tank may be used at a rate of 1 litre per minute for 120 seconds per 5 gallons.
Pitch yeast and ferment at 67F (wort temperature). We use modified stainless fermenting buckets in wine fridges.
Due to the high hopping rates and quadruple dry hopping the beer is very susceptible to oxidation. You have to be very careful to minimize all exposure to oxygen in order to preserve the hop flavours and aromas. Even hops themselves can have oxygen caught in their anatomy. Some hints:
If a vessel needs to be opened, purge the headspace with CO2 before closing.
Before adding hops to beer, place them in a tall container and flush with CO2.
Flush target vessels with CO2 before transferring beer. If hops are to be added at the same time (i.e. dry hop #2), add them to the vessel first.
Don't be stingy with CO2! CO2 is cheap. To flush vessels, growlers, kegs we have a separate bare gas line off one of our manifolds with its own shutoff.
Add dry hops #1 once fermentation is nearing completion (i.e. 5 points from terminal gravity) and raise the temperature to 70-72F. We simply turn off the fermenting fridges and allow the beer to naturally rise to room temperature. Steep dry hops #1 for 3 days while fermentation finishes. Assume fermentation is done if the gravity does not change over ~3 days.
Add dry hops #2 to brite tank (we use 5 gallon glass carboys), purge with CO2 to avoid oxygen pickup, then carefully rack in the beer on top of the hops. Allow to steep for 3 days at 70-72F room temperature, gently swirling a few times a day. We do not recommend using hop sacks or other containers as you'll get the best flavour extraction from the hops if you let them roam free. For beers such as this that require multiple dry hop additions, some will dry hop in kegs using stainless steel dry hoppers, tying a piece of unflavoured / unwaxed dental floss to the lid to make it easy to remove (the floss is thin and doesn't impede the seal between the keg and keg lid). We don't recommend this approach as we find that the hops tend to clump together which in turn reduces oil extraction, requiring far too many hops to be used (and more beer lost to absorption).
After 3 days in the brite tank add dry hops #3. Leave previous hops in. Swirl gently a few times a day.
After 6 days in the brite tank add dry hops #4. Leave previous hops in. Swirl gently a few times a day.
After 9 days in the brite tank package as you would normally. We rack to kegs that have first been purged with CO2, and then carbonate on the low side (around 2 volumes of CO2) to minimize carbonic bite and let the hop and malt flavours shine through. We chill the kegs to near freezing while carbonating at the same time in a 6-keg conditioning fridge. After ~1-2 weeks at serving pressure the kegs will be carbonated and ready to serve. Like all hop forward beers this Double IPA is best consumed fresh so feel free to raise the CO2 pressure temporarily to 30-40 PSI to carbonate fast over a 24 period, and then turn back down to serving pressure. Some hop bits will have invariably made their way into the keg during transfer so we use a Hop Stopper Keg Edition filter to ensure that hops do not clog the dip tube and/or end up in the glass. Force carbonating at high pressure and using a Hop Stopper filter allows us to serve this beer 24 hours after kegging. There's no need to wait a few days for any hop bits that made their way into the keg to first settle out.
We do not recommend using finings such as unflavoured gelatin as it may "round off" hop flavours / aromas.

Author:

asdf29

Boil Size: 5 Litres

Boil Time: N/A

Boil Gravity: 1.114

Efficiency: 80

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 11/1/2020 5:32 PM

Notes: Make a starter with 2 tsp lemon juice, yeast nutrient, 2l water and 250g honey - around 1.030.

Add frozen currants, pectolase enzyme and 3.2l water - soak for 3 days at 10C.

Heat to 29C, and add 1kg honey. Save some starter, and add rest to fermenter.

Ferment at 29C until done.

WIP.

Author:

RustyBarrelHomebrewing

Boil Size: 5.75 Gallons

Boil Time: 120

Boil Gravity: 1.08

Efficiency: 51

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 69 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/15/2020 3:35 PM

Notes: 12072020 updating recipe. Notebook has 1080 wo extract that is 51% eff. Plus the extract gives 1102. Notebook has FG at 1010 (crazy!) Making this 90% attenuation and 12% abv. I almost dont believe that. Tasting a bottle today, it is strong, but fruity off flavors. Too dry and thin. Want malty sweet. Next time, pay attention to ph, water profile. Maybe buy yeast packs and starters to get target yeast population instead of reusing since that seems to over attenuate. This way we might get to a higher final gravity. Could consider kviek to save time/money. Also maybe finally spring for british malt and hops and yeast?
=====================================
6/19/2020 :
kegged a couple days ago. final gravity is 1.010 i believe. need to check notebook, which also has the OG. needs resolving....(just leaving these incomplete notes now in case i never come back to it)
=====================================
5/21/2020 :
came out with really low efficiency so THIS thread is using the extract. the previous thread without extract is here : https://www.brewersfriend.com/homebrew/recipe/view/870147/100-v2-
=====================================
5/14/2020 :
brew day. Changing warrior to millennium. Changing pre boil volume from 6.5 to 6. Post boil 4.5. Batch 4.

Ended up with slightly more than 4. Brewed this on induction plate so possibly wasnt the most rigorous but it was decent. Was boiling wort as i was pulling it / during the sparge.

=====================================
5/12/2020 : okay unfortunately i am ready to brew this beer as soon as tomorrow evening but did not really stick to my initial desires - this brew is going to be 2row and 1056. i really want to do it the british way but not in the cards this time. (stupid me, bad planning...there is a sidenote here that i brewed something with london yeast earlier this year in plans to branch into barleywine, but the yeast was tainted or something else happened delaying the barleywine). alas this brew will be pitched directly on to a blonde ale yeast cake. i may take out a couple scoops of the cake prior to save for something else.

what i want to know right now is :
* is this 1.25 lb of 60 going to do much? (i guess its too late to do anything else, besides add other random crystal laying around)
* need to confirm / dial in mash temp
* probably going to want to drop efficiency a couple points, maybe to 65, just in case. tbh 70 is the absolute highest of the high that i sometimes dont even reach on sessions.

=====================================
Update 12/19/2019: I'm changing this recipe a bit to try for better barleywine body and flavors. using british malt and doubling the crystal. will continue on with the american hops and london yeast.

=====================================
update 8/19/19 :
Last one came out kind of thin. This time going to bump boil time up to 120 minutes. CONSIDER USING MARIS OTTER. Everywhere says to mash at 150; first batch notes say 155 but this time will make sure to try to hit 155. NEED TO RESOLVE WHAT TO DO ABOUT MASH THICKNESS. Changing recipe to 4 gallons to try to not use any DME. Lowering IBU less than 50.
=====================================
update 1/3/19 : originally i was thinking english but i just copied my existing recipe into this one and modified it to match this american style recipe old foghorn from anchor :
https://www.homebrewersassociation.org/homebrew-recipe/anchor-brewing-old-foghorn/

the fwh seems to add a lot more ibu than the original recipe. could change the util % but im not sure what it means even after reading the blog on this site. 70 something still isnt too high, it wil be harsh / hot for a while tho

this has a ton more hops than the original it really is americanized, could consider using us05....

to carbonate, you could :
a) primary 2-3 weeks, secondary 1-6 months (some people add champaigne yeast here), bottle condition 3-9 weeks (some people add champagne yeast here too)
b) primary 2-3 weeks, bottle with no additional yeast, age/condition for 6 months..

https://www.homebrewtalk.com/forum/threads/bottle-conditioning-barleywine.165607/

think about doing a partigyle 2nd brew
https://byo.com/mead/item/1963-parti-gyle-brewing-techniques

would like to age at least one gallon on bourbon and oak...

Author:

Jared Kelly

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.064

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/2/2019 1:08 AM

Notes:

Author:

Wasserhund

Boil Size: 81 Gallons

Boil Time: 75

Boil Gravity: 22.9

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/13/2018 2:46 PM

Notes:

Author:

Roghengarder

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.187

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/11/2017 6:09 PM

Notes: Pulling one 20oz to boil down to syrup and the add back to wort

Author:

jspirko

Boil Size: 3 Gallons

Boil Time: 90

Boil Gravity: 1.137

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.5

Primary Temp: 67 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/23/2017 7:31 PM

Notes:

Author:

jmacak4

Boil Size: 5.75895 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/9/2011 7:29 PM

Notes: Many compliments on this. This beer is malty, dry and has wonderful fruity esters. I will brew again with bourbon soaked oak cubes.

Author:

drothe

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: 1.111

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/15/2017 1:47 PM

Notes:

Author:

jason.rosenberger@gmail.com

Boil Size: 6.2 Gallons

Boil Time: 60

Boil Gravity: 1.066

Efficiency: 66

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 58 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/22/2016 12:35 AM

Notes:

Author:

Shawn Mason

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.059

Efficiency: 70

Mash Thickness: 1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 62 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/4/2016 6:41 PM

Notes:

Author:

GregH

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.055

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/26/2016 11:18 AM

Notes:

Author:

Taradil

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.084

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/25/2016 9:28 PM

Notes:

Author:

Ericm53

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 13.2

Efficiency: 79

Mash Thickness: 1.5

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/24/2015 4:49 PM

Notes:

Author:

dejo

Boil Size: 21 Litres

Boil Time: 60

Boil Gravity: 1.066

Efficiency: 75

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/22/2015 7:06 PM

Notes:

Author:

DoorBrewingCo

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.177

Efficiency: 50

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/22/2015 9:14 PM

Notes: Quadrupel Style Grand Cru. Heavier trappist style, with an ABV hidden behind taste. Should be slightly sweet, but still dry with hints of sweet orange peel and a barrel-aged taste. Be sure to use a blowoff tube when fermenting. Add sweet orange peel in primary, and French Oak secondary. Fermentation lasts three weeks. After ten days, primary is over.

Author:

WI-Brew

Boil Size: 6 Gallons

Boil Time: 75

Boil Gravity: 1.031

Efficiency: 76

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 62 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/10/2016 5:38 AM

Notes:

Author:

NDB

Boil Size: 27.5 Gallons

Boil Time: 60

Boil Gravity: 1.032

Efficiency: 75

Mash Thickness: 1.33

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/12/2018 2:19 AM

Notes:

Author:

Boil Size: 20 Litres

Boil Time: 60

Boil Gravity: 1.027

Efficiency: 75

Mash Thickness: 2.7

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 17 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/11/2019 12:16 PM

Notes: