Extract Homebrew Beer Recipes | Page 14 | Browse 30,000+ at Brewer's Friend

Author:

Mhottman

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 30

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/1/2012 10:21 PM

Notes:

Author:

Cavebrewer

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.088

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.0

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/1/2014 3:14 AM

Notes: This is a modified Northern Brewer kit that can be found here:
http://www.northernbrewer.com/shop/kama-citra-session-ipa-recipe-kit.html

I added 2 pound of sugar to boost the ABV, and added the DME and sugar at 30 minutes in the boil to raise the IBUs. The kit recipe calls for 0.5 oz of Centennial at 60 minutes, but the kit comes with a full ounce. I added 0.5 oz at the start of the boil, and over the next 30 minutes I periodically threw in 3-4 pellets every few minutes.

Author:

Beer_Pirate

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.159

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/1/2017 3:27 PM

Notes:

Author:

Zach Hogan

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/17/2014 3:07 AM

Notes: A Clone of Green Flash's West Coast IPA.

Author:

EvanAltman36

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.5

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/25/2013 1:26 AM

Notes: 2 packs yeast, semi-clone of Sam Adams Double Agent IPL. I really liked that Sam when I tried it, so I put together a recipe that mirrors it pretty closely. The color may be a little lighter, but the IBU's and ABV are dead on as far as I can tell. 4 packets Nottingham, 44g. Or go with Wyeast Cali Lager smack pack and create 2L starter and then pitch.

Author:

RyDog

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 85

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/28/2015 1:29 AM

Notes: 77l malt not 80.
Nice hoppy flavor
Two weeks in primary
5 weeks in bottle before at its best
A crowd favorite. Though the ABV snuck up on folks compared to the drinkability.

Author:

JohnEnnui

Boil Size: 15 Litres

Boil Time: 60

Boil Gravity: 1.121

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: Sugar

Priming Amount: 210g

Creation Date: 8/6/2016 11:38 AM

Notes:

Author:

Sammy C

Boil Size: 6.5 Litres

Boil Time: 60

Boil Gravity: 1.069

Efficiency: 10

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 21 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/17/2017 3:18 PM

Notes:

Author:

illingwd

Boil Size: 11.4 Litres

Boil Time: 60

Boil Gravity: 1.037

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/27/2018 9:21 AM

Notes: This recipe uses the Palmer Brewing method:

- Make up wort in 3 US gal (11.4L) of cold water (on the heat) using half of the total DME. Heat the water up to steep temperature before adding the steeping grains.
- At the end of the boil add the remaining DME and allow the final hop addition to steep.
- Cool and add the wort to 3 US gal (11.4L) of cold water in the fermentor to make up target volume.

Author:

Trent212

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: corn sugar

Priming Amount: .75 cup

Creation Date: 5/26/2012 7:02 PM

Notes: Steep grains 30 min.
Add extract, gypsum and honey. Boil.
Add Northern hops, 0 min.
Add Willamette at 45 min.
Add Moss at 55 min.

Cool to 75F, take reading.
Pitch yeast. 7-10 days.
Transfer, 7-10 days.
Bottle, age 1-2 weeks.

Author:

Jodi

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.075

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: Sugar

Priming Amount: N/A

Creation Date: 3/22/2014 7:49 PM

Notes:

Author:

Gregory L

Boil Size: 6.06 Litres

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 21 ° C

Priming Method: sugar for bottling

Priming Amount: 175ml

Creation Date: 4/24/2015 2:32 PM

Notes: >malt extract can be light or extra light
>yeast should be Belgian Wit (wheat) beer type
>use light honey

Directions for 5gal batch:
O.G.: 1.056-1.060
F.G.: 1.008-1.010
Bitterness: 18BU
Colour: 4SRM (8 EBC)
Alcohol: 6.3% by volume

Add malt extract, honey, and boiling hops to 7.5L water and boil for 60 mins. Add the flavor hops, ground coriander and orange peel for the final 5 minutes. Add the aroma hops for the final 1-2 minutes of boiling. Strain, sparge, and transfer immediately to 7.5L of cold water in the fermenter. Top off with additional water to make 19L. Aaerate the wort very well. Pitch the yeast when the temperature of the wort is about 21C. Ferment at about 21C for about 1 week or when fermentatino shows signs of calming and stopping.
Prime with sugar and bottle or keg when fermentation is complete. For added attraction add one whole coriander seed to each bottle when bottling (microwave them if worried).

Author:

GlassHalfFull

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: 1.074

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.0

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/6/2013 9:17 PM

Notes:

Author:

bfinleyui

Boil Size: 2.5 Gallons

Boil Time: 55

Boil Gravity: N/A

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/1/2012 7:19 PM

Notes:

Author:

BenMyton

Boil Size: 0.6 Gallons

Boil Time: 60

Boil Gravity: 1.035

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/14/2016 5:59 AM

Notes: I use this to track my DME inventory and use - This is not a real recipe.

Dilute 1.040

Author:

Yooper

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/6/2017 7:28 PM

Notes: Ferment at 65 degrees, and then the beer can be kegged (or bottled) once it drops clear in about 10 days.

Author:

colbon

Boil Size: 5.5 Gallons

Boil Time: 15

Boil Gravity: N/A

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/11/2012 12:03 PM

Notes: Version of my tried and true mead recipe for some friends who are just learning to brew. This uses 1/3 wildflower to make it more interesting than straight clover honey. I use dry malt extract as a nutrient source and chalk to buffer the pH during fermentation, as I've found this to make my batches very clean and predictable (no stuck fermentations). Typically even a strong mead as this will be very nice to drink in less than 3 months. I try to always use Wyeast Dry Mead as it is very predictable and drops ~100 gravity points, making it easy to achieve the desired final sweetness. This mead will be semi-sweet and should finish around 1.020.

Directions: Bring 3 gallons water plus malt extract to boil, add chalk & irish moss, boil 15 mins, turn off heat, add honey, steep for 10 mins, top off with water to yield full 5 gallons, chill, aerate and pitch yeast.

Author:

DrummerJim

Boil Size: 11 Litres

Boil Time: 60

Boil Gravity: 1.101

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/11/2015 2:02 PM

Notes: 100g

Author:

tymoss

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.106

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/26/2013 2:03 AM

Notes: Michigan sour cherries in secondary, sanitized, frozen, then crushed. Primary - 1 week. Secondary - 2 weeks.

Author:

Jon D'Alessandro

Boil Size: 3.1 Gallons

Boil Time: 60

Boil Gravity: 1.097

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: Corn Sugar

Priming Amount: N/A

Creation Date: 5/7/2017 1:24 AM

Notes: In a large soup pot, heat 3.4 quarts (3.2 L) of water to 165 °F (74 °C). Add crushed grains to grain bag. Submerge bag and let grains steep around 154 °F (68 °C) for 45 minutes. While grains steep, begin heating 2.25 gallons (8.5 L) of water in your brewpot. When steep is over, remove 1.1 qts. (1 L) of water from brewpot and add to the "grain tea" in steeping pot. Place colander over brewpot and place steeping bag in it. Pour grain tea (with water added) through grain bag. This will strain out any solid bits of grain and rinse some sugar from the grains. Heat liquid in brewpot to a boil, then stir in dried malt extract, add first charge of hops and begin the 60 minutes boil. With 15 minutes left in boil, add sugar, remaining hops, yeast nutrients and Irish moss. Then turn off heat and stir in liquid malt extract. Stir well to dissolve extract, then resume heating. (Keep the boil clock running while you stir.) At the end of the boil, cool wort and transfer to fermenter. Add water to make 5 gallons (19 L), aerate wort and pitch yeast. Ferment at 70 °F (21 °C). Rack to secondary when fermentation is complete. Bottle a few days later, when beer falls clear.