Biab Homebrew Beer Recipes | Page 114 | Browse 50,000+ at Brewer's Friend

Author:

Bklyn

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 72

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/13/2017 4:23 PM

Notes: ELYSIAN THE WISE ESB
O.G: 1.060 BREW TIME 6 WEEKS: 2 WEEKS PRIMARY | 1-2 WEEKS SECONDARY | 1-2 WEEKS BOTTLE CONDITIONING
ALL-GRAIN

· 10.5 lbs Rahr 2-Row
· 1 lb Crisp Crystal 77L
· 1 lb German Munich
· 0.25 lbs Weyermann Carahell
· 0.13 Belgian Special B

BOIL ADDITIONS & TIMES
· 1 oz Chinook (60 min)
· 0.5 oz Cascade (2 min)
· 0.5 oz Centennial (2 min)
· 0.5 oz Cascade (0 min)
· 0.5 oz Centennial (0 min)
YEAST
Dry Yeast:
· Fermentis Safale US-05. Optimum temp: 59°-75°F
Liquid Yeast Options:
· Omega OYL-004 West Coast Ale I. Optimum temp: 60°to 73°F
· Wyeast 1056 American Ale. Optimum temp: 60°-72°F

MASH SCHEDULE: SINGLE INFUSION
If you are new to all-grain brewing, we suggest starting with 1.5
quarts of water per pound of grain for the strike water volume. This
mash thickness can be adjusted for future brews as you become
more comfortable with your equipment.
· Saccharification Rest: 154° F for 60 minutes
· Mashout: 170° F for 10 minutes (optional) - to raise the temperature for mashout, gently apply direct heat while stirring well, or add near boiling water until the target temperature is reached.

Prepare sparge water in your hot liquor tank at a rate of 2 quarts
per pound of grain in the recipe, and perform a fly sparge until
you have gathered your pre-boil volume (6-7 gallons) in your boil
kettle. The sparge should take about an hour for optimal extraction
efficiency. You should end up with extra sparge water in your hot
liquor tank, you can use this hot water for cleaning later on.

This recipe calls for a 60 minute boil duration.
· Add 1 oz Chinook hops at the beginning of the boil.
· Add 0.5 oz Cascade and 0.5 oz Centennial hops with 2 minutes remaining in the boil.
· Add 0.5 oz Cascade and 0.5 oz Centennial hops with 0 minutes remaining in the boil.

Author:

guyfrombrussels

Boil Size: 12 Litres

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 85

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 25 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/3/2015 7:39 PM

Notes:

Author:

Freefallfrom10k

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.076

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/11/2019 6:10 PM

Notes:

Rhode Island
Providence Brewing Co. | Battlecow Galacticose | NEIPA
• For 5.5 gal (20.8 L)
• 10 lb (4.5 kg) 2-row malt
• 2 lb (0.91 kg) Flaked Oats
• 1.5 lb (0.68 kg) Carafoam
• 1.5 lb (0.68 kg) White Wheat
• 2 lb (0.91 kg) Milk Sugar (lactose)
• 2 oz (56 g) Columbus whole leaf hops, 14% a.a. (FWH)
• 2 oz (56 g) Columbus pellet hops, 14% a.a. (60 min)
• 2 oz (56 g) Citra pellet hops, 12% a.a. (whirlpool, 30 min)
• 2 oz mosaic pellet hops, 12.25% a.a. (whirlpool, 30 min)
• The Yeast Bay's Hazy Daze IPA Blend yeast
• 1 oz (28 g) Citra pellet hops, 12% a.a. (dry hop, 2 days into fermentation)
• 1 oz (28 g) Mosaic pellet hops, 12.25% a.a. (dry hop, 2 days into fermentation)
• 1 oz (28 g) Citra pellet hops, 12% a.a. (dry hop, 4 days)
• 1 oz (28 g) Mosaic pellet hops, 12.25% a.a. (dry hop, 2 days)
• 2 oz (56 g) Citra pellet hops, 12% a.a. (dry hop, 10 days)
• 2 oz (56 g) Mosaic pellet hops, 12.25% a.a. (dry hop, 10 days)
• 1 oz (28 g) Citra cryo hops, 26% a.a. (during kegging)
• 1 oz (28 g) Mosaic cryo hops, 26% a.a. (during kegging)
• Original Gravity: 1.071
• Final Gravity: 1.019
• ABV: 8.1%
• IBU: 70
• SRM: 3.6
Single infusion mash at 155° F (68° C) for 60 minutes. Add first wort hops (FWH) as wort is being collected in the boil pot. Boil for 60 minutes, following ingredient additions as listed. Turn off heat and let temperature drop to 198° F (92° C), then add the whirlpool hops and let stand for 30 minutes. Chill to 70° F (21° C), transfer to a fermenter, and pitch yeast. 2 days after pitching the yeast, add the first dry hop additions (1 oz Citra; 1 oz Mosaic) . After active fermentation has stopped, typically 4-5 days after pitching the yeast, add the second round of dry hops (1 oz Citra; 1 oz Mosaic). A day later, burp your fermenter (if possible) with a 30 second burst of CO2 to rouse the hops. Just before kegging your beer, bag and add last dry hop additions (1 oz Citra cryo; 1 oz Mosaic cryo) to the keg. Enjoy!

Author:

oipivo

Boil Size: 26 Litres

Boil Time: 90

Boil Gravity: 1.034

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 1.5

Primary Temp: 15 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/31/2018 9:51 AM

Notes:

Author:

Papini

Boil Size: 29.15 Litres

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 66

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 20 ° C

Priming Method: co2

Priming Amount: 2.11 bar

Creation Date: 10/31/2015 8:55 PM

Notes: Relação BU/GU - 0,26

Adição dos sais e da enzima ultraflo max nos 34 litros de água.
Perfil da água para o estilo Weizen:
Cálcio - 50-100 mg/l
Magnésio - 0-30 mg/l
Sódio - <100 mg/l
Cloreto - 0-100 mg/l
Sulfato - 0-50 mg/l
Alcalinidade Total - 0-80 ppm - Esperado 16,5
Alcalinidade Residual - (-)30-0 ppm - Esperado -60
PH 5,4 - Esperado

Relação sulfato/cloreto - 0,6 - Maltado

Nutriente para levedura Yestamina bio4 - 1 capsula nos 15 minutos finais da fervura.

1 pacote de Fermentis - WB-06.
Starter com 1,0L e 100g DME: 0.80M cells / mL / °P

Fermentação:
19°C por 5 dias
21°C por 2 dias
Baixar de 21°C para 15°C em 3 dias

Baixar para 0°C e manter por 12 dias.

Author:

SchuBrew

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/7/2016 4:44 PM

Notes:

Author:

Boil Size: 80 Litres

Boil Time: 90

Boil Gravity: 1.032

Efficiency: 68

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 17 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/4/2017 9:46 PM

Notes:

Author:

Boil Size: 6.25 Gallons

Boil Time: 180

Boil Gravity: 1.024

Efficiency: 62

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/4/2019 9:03 PM

Notes: A Scaled-Down Mash Schedule from Cantillon Brewery

The following is a homebrew-scale version of the Cantillon Brewery’s (Brussels, Belgium) turbid mash schedule. Based on the information presented in Martin Lodahl’s article, the Cantillon Brewery gets about 33–34 points/lb/gallon. The Cantillon grist is composed of 34% raw wheat and 66% malted barley. The recipe is scaled down here to yield 5 gallons of wort with an original gravity of 1.048 (11.86 °P), or 5 x 48 = 240 points. If we assume we will get 30 points/lb/gallon, then 240 ÷ 30 = 8 lb of grain. The barley malt fraction is 66% of 8 lb, or 5.3 lb of malt, leaving the remaining fraction of raw wheat at 2.7 lb.

The Cantillon schedule calls for mashing 1,300 kg of grain into 850 L of water (2,860 lb grain into 900 quarts water), or 3.2 lb grain/qt water, or 0.3 qt water/lb grain. Our 8 lb of grain therefore requires 8 x 0.3 quarts, or 2.4 quarts of water.

Procedure

In all of the following steps, the temperature and water additions were taken directly from the Cantillon schedule as published and scaled accordingly.

1) In kettle #1, combine water (about 2.4 quarts) at 144 °F (62 °C) and the crushed grain to achieve a temperature of 113 °F (45 °C). Mix the grain and water thoroughly and allow it to rest at 113 °F for 10 minutes. This amount of water is just enough to wet all of the grain and flour. The mash needs to be stirred well to make sure that all the grain is wetted and that no clumps of flour are present. Total time for this step is about 20 minutes, including the temperature rest.

2) Next, add enough boiling water (212 °F [100 °C]) to the mash to bring the temperature to 136 °F (58 °C). Do this over the course of 5 minutes, making sure to mix thoroughly. It will take about 3.5 quarts of boiling water to raise the mash temperature to 136 °F, and you will end up with a very soupy mash with plenty of excess liquid. Allow the mash to rest for 5 minutes at this temperature. Remove about 1 quart of liquid from the mash, add it to kettle #2, and heat to 176 °F (80 °C). The liquid taken off should have the appearance of milk. Once heated it will clear up and large particles of hot break will form.

3) Add more boiling water to the mash over the course of 10 minutes to bring the temperature to 150 °F (65 °C), again with constant mixing. It will take about 5 quarts to achieve this temperature. Allow the mash to rest for 30 minutes at 150 °F (65 °C). At this point, the mash will be very soupy and the liquid much less milky in appearance.

4) Remove 4 quarts of liquid from kettle #1 and add it to kettle #2, which will put it up to 5 quarts. Continue to heat kettle #2 to maintain a temperature of 176 °F (80 °C). The liquid removed from kettle #1 will be very cloudy, but not quite as milky as the liquid previously removed in step 2.

5) Add more boiling water to kettle #1 to bring the temperature to 162 °F (72 °C) and allow it to remain at that temperature for 20 minutes. Again, it will take about 5 quarts of water to reach the rest temperature. The mash should be very thin and soupy with a great deal of small particulate matter in the liquid portion.

6) After the 20-minute rest, run off the liquid from kettle #1 and bring to a boil in a third kettle. Add enough of the liquid from kettle #2, at 176 °F (80 °C), back into the mash in kettle #1 to bring the mash to a temperature of about 167 °F (75 °C). Allow the mash to rest at that temperature for 20 minutes. If any liquid is left in kettle #2, it can be added to the previously collected runoff in kettle #3.

7) After 20 minutes, recirculate the wort in kettle #1 to clarify it, and begin sparging with 185 °F (85 °C) water. Sparge until the gravity of the runoff has dropped to less than 1.008 (2.06 °P). Boil the wort, now in kettle #3, until the volume is reduced to about 5 gallons.

8) As the wort begins to boil, hop with about 4 oz of aged hops. The combined water additions and sparging should add up to about 9 gallons of wort. Total boiling time to reduce this volume to 5 gallons will depend on your equipment and methods. At the beginning of the boil, the wort will be cloudy and full of large flocculent break material. As the boil proceeds, the wort should clarify as the proteins continue to coagulate and the starch solubilizes. After boiling, the wort can be cooled using your method of choice. This method of mashing does not seem to yield the large amount of break that a typical all-malt infusion mash would yield. As stated elsewhere, however, your results may vary depending on your equipment and technique.

Author:

tessums

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: 1.082

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.5

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/16/2016 12:23 AM

Notes:

Author:

jt196

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: N/A

Efficiency: 56

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 17 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/10/2013 4:37 PM

Notes:

Author:

ElkinsBrew

Boil Size: 7.5 Gallons

Boil Time: 70

Boil Gravity: N/A

Efficiency: 72

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/22/2012 12:39 AM

Notes: OG: 1.048
FG: 1.011

Author:

Jan Erik Johansen

Boil Size: 28 Litres

Boil Time: 90

Boil Gravity: 1.077

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 21 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/17/2016 9:41 AM

Notes:

Author:

Stevobrews10000

Boil Size: 13 Litres

Boil Time: 60

Boil Gravity: 1.053

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 28 ° C

Priming Method: Strawberrys into fermentor

Priming Amount: 500g

Creation Date: 12/10/2016 1:06 AM

Notes:

Author:

BruskiBruing

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 69 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/11/2019 8:03 PM

Notes:

Author:

N0mad

Boil Size: 4.75 Gallons

Boil Time: 60

Boil Gravity: 1.038

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: 126 grams

Creation Date: 6/14/2018 2:42 PM

Notes: Step mash (though decoction is tradional and still used, be wary of color pick up though).
30 minute rest at 114 (to enhance esters and clove)
then step up though beta
147 for 30-40
163 for 30
170-10

Pristine wort pre-boil, soft boil 60 minutes
A 60 min addition of Hallertau Mittlefruh, to about 12-14ibu
hot and cold break separation
5 ppm 02, 1 smack pack per 5g of 3068
Ferment at 68F (to enhance banana)
Spund or Krausen to 4 vols.

Author:

Kjeller 5

Boil Size: 29 Litres

Boil Time: 90

Boil Gravity: 1.056

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 1.0

Primary Temp: 18 ° C

Priming Method: Sukkerlake

Priming Amount: 6

Creation Date: 2/12/2016 3:27 PM

Notes:

Author:

Boil Size: 13 Litres

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/22/2015 9:27 PM

Notes:

Author:

DrSherlock

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.038

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/2/2014 10:18 PM

Notes: This will probably be brewed with Conan yeast

Inspired by:

http://www.brew365.com/beer_three_floyds_gumballhead.php

Total Water Needed
5.92 Gallons
Strike Water Temp
159 Fahrenheit
Total Mash Volume
6.66 Gallons
PreBoil Wort
5.50 Gallons
PostBoil Wort
4.25 Gallons
Into Fermenter
4.00 Gallons

Author:

bablitz

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/13/2013 8:29 PM

Notes: (White IPA? American Wit? Kiwi Wit?)

Author:

cocktailales

Boil Size: 7 Gallons

Boil Time: 90

Boil Gravity: 1.056

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 72 ° F

Priming Method: Creme de Cassis

Priming Amount: 750mL

Creation Date: 8/15/2016 4:00 PM

Notes: Yeast: WLP590 - 1st week @72F, 2nd week @ 76F.

Add bottle of [Potter's] Creme de Cassis to bottling bucket. Skipped adding any additional priming sugar.

3-4 weeks bottle carbonating/conditioning at room temperature. 3-4 weeks lagering* at 32F.