All-grain Homebrew Beer Recipes | Page 950 | Browse 220,000+ at Brewer's Friend

Author:

Boil Size: 3.5 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 60

Mash Thickness: 1.2

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/16/2016 4:27 PM

Notes:

Author:

RustyBarrelHomebrewing

Boil Size: 13.5 Gallons

Boil Time: 90

Boil Gravity: 1.042

Efficiency: 69

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/14/2022 5:17 PM

Notes: =============================
4/22/2021
brew day.
removing the hallertau mittelfruh and saaz in favor of nobility. adding some hallertau magnum i have in the fridge and then im going to have to add some warrior to get the rest of the way on ibu.

i picked up 10 gallons of glacier RO water from publix and added all treatments to strike water. next time prob need to get 15 gallons.

=============================
4/15/2021
copied into new recipe to change to 10 gallons. this time will be using reused bavarian lager 2206 yeast from maibock 5 gallon batch. i think half the cake in each fermentor will be ok.

Redoing the water, not sure what it was set to before....
appears there is no real way to get a decent water profile for light lager from my house water. hopefully i can get a couple of those 5 gallon jugs and not have to buy 10 damn gallon jugs from grocery

im not sure but i think i can just add all my water additions to the mash water and be done with it? use straight distilled for the sparge
=============================
8/12/2020
brew day. changing recipe to reflect saaz are actually 2.8 instead of 3.5. and i accidentally added .5 oz at 30 and flameout instead of .25 and .75 respectively.

=============================
8/11/2020
copied into a new recipe today to mess with water profile. thinking about starting with distilled or purified (not sure if this is the same as RO) and building. looked at the pilsner preset profile which is very soft but that is just base water and suggested will not work correctly for mash and yeast health! instead looking at actual target profiles for czech pils i found online, debating between two (one from AHA forum, other from braukaiser) link in the water profile.

be sure to add acid only to the mash.

=============================
7/12/2020
i rushed the end of this brew to have it ready for a trip to nj.
i believe i let it warm to 70 on day 10
cold crashed on day 11
kegged and carbed on day 12
canned on day 13
the cans turned out a little weird once we got to nj. diacetyl or dms or something. maybe a packaging issue.
when i returned home (day 25) the beer is still crisp fresh tasty and now clear.

overall i wouldnt be scared to try this fast fermentation schedule again, it turned out pretty clean. probably would want to start the diacetyl rest earlier and maybe for one more day. and it would be ideal to cold crash for at least a week before kegging. maybe two if you can stand it :-)

=============================
6/24/2020
kind of stuck the beer in the fridge without thinking about fermentation plan. i wish i had done the rustys' fast lager technique (pasted below) but its too late i think.
=============================
6/18/2020
brewed last night. original recipe i had 65% efficiency but came out at like 72. wanted to land at 4.9% but this will be 5.5%. oh well.

i think my efficiency is actually decent for 10-11 lbs grain, then goes down as i add more and more grain.

=============================
6/9/2020
heavily formulated from notes and sample recipe here : https://byo.com/article/bohemian-pilsener-style-profile/

=============================
not sure if i will use this on this brew but for reference, here is rusty's fast lager schedule :
1. 50deg for first 48 hours
2. raise one degree each day for 10 days
3. on day 11, allow temp to free rise to (warmest temp in brewery, but lets just say 70)
4. 9 days later start the cold crash

Author:

PeaBee

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: 13.9 psi

Creation Date: 3/13/2021 2:02 PM

Notes:

Author:

LRS

Boil Size: 28 Litres

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 75

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/15/2020 5:51 AM

Notes:

Author:

SgtDimples

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.046

Efficiency: 68

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/29/2018 3:52 PM

Notes: 1. pilsner and 6-row was ground and added to mash tun along with flaked oats with tun around 168, mash was still quite hot, vigorously stirred for about 5-10 min to bring the temp down to around 150-154 degrees fahrenheit.

2. Mashed for more than 90 min (10-20 min more), I had made the mistake of starting to heat my sparge water late. prior to sparge, wort was at about 148 degrees fahrenheit

3. Vorlauf 2-3 times with 1/2 gallon each circulation.

4. Sparged with ~6.5 gallons for 30 min with water at 200 degrees Fahrenheit.

5. Once sparge reached ~7.5 gallons, boil started, for about 90 minutes, added 1oz of cascade hops 45 min into the boil, and some irish moss with 15 left in the boil. Yielded more than original batch target of 5.5 gallons. (about 6 gals)

6. Wort chilling began with copper wort chiller. It was a hot day, ~85 degrees, could not get the beer effectively below 80 degrees.

7. Added fruit and fruit juice to the carboy after transfer from boiler. Picture showed is my OG reading. ~1.056-1.058

8. Due to the hot temp, I decided to wait to pitch the yeast, and decided to add 5 teaspoons of pectic enzymes and let it sit for 12 hours before pitching yeast along with yeast nutrient around 70-72 degrees.

Author:

onlyamos

Boil Size: 14 Gallons

Boil Time: 60

Boil Gravity: 1.044

Efficiency: 75

Mash Thickness: 1.33

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: co2

Priming Amount: N/A

Creation Date: 4/19/2018 3:53 PM

Notes: Step by Step

Mill the grains (including the flaked grains, but excluding the rice hulls). Mix the rice hulls into the grain post milling and dough-in targeting a mash of around 1.5 quarts of water to one pound of grain (a liquor-to-grist ratio of about 3:1 by weight) and a temperature of 122 °F (50 °C). Hold the mash at 122 °F (50 °C) for 15 minutes then raise the temperature over the next 15 minutes to 154 °F (68 °C). Hold until conversion is complete, about 60 to 90 minutes. Raise the temperature to mash out at 168 °F (76 °C). Sparge slowly with 170 °F (77 °C) water, collecting wort until the pre-boil kettle volume is around 6.5 gallons (25 L) and the gravity is 1.039 (9.7 °P).

The total wort boil time is 90 minutes, which helps reduce the SMM present in the lightly-kilned Pilsner malt and results in less DMS in the beer. Add the bittering hops with 60 minutes remaining and the spices with five minutes left in the boil. Do not bother with Irish moss or other kettle finings. Chill the wort rapidly to 68 °F (20 °C), let the break material settle, rack to the fermenter and aerate thoroughly.

Pitch ten grams of properly rehydrated dry yeast or use two liquid yeast packages. Alternatively make a 2 qt. (2 L) starter using one package of liquid yeast. Begin fermentation at 68 °F (20 °C) slowly raising temperature to 72 °F (22 °C) by the last one-third of fermentation. When finished, carbonate the beer to approximately 2.5 to 3 volumes of CO2.

Author:

Hopsterator

Boil Size: 30 Litres

Boil Time: 180

Boil Gravity: 1.065

Efficiency: 55

Mash Thickness: 2.8

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 17 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/12/2018 6:45 PM

Notes:

Author:

daniel.griffi@me.com

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.058

Efficiency: 60

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/25/2017 11:04 PM

Notes:

Author:

EBC-JalaPeno

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/15/2017 5:12 AM

Notes:

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 72

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/23/2016 7:56 PM

Notes:

Author:

Bumblingfool

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 70

Mash Thickness: 16

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/22/2015 4:03 PM

Notes: Pitch yeast at 70
Primary for 14 days
Rack to secondary
Dry hop addition after 14 days
Remain in secondary for total 6 weeks
Prime with 3/4 c. Corn sugar
Refrigerate after 14 days

Author:

Oficina do malte

Boil Size: 80 Litres

Boil Time: 70

Boil Gravity: 1.043

Efficiency: 90

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/13/2016 5:40 PM

Notes:

Author:

BaldBrewing

Boil Size: 7 Litres

Boil Time: 60

Boil Gravity: 1.026

Efficiency: 35

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/30/2016 11:44 AM

Notes:

Author:

tentacle monster brews

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.028

Efficiency: 58

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/19/2016 8:27 PM

Notes:

Author:

amcclain

Boil Size: 130 Gallons

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 80

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/30/2015 8:24 PM

Notes: Pitch all 22 packs of London ESB yeast.

Attempt to grind fairly fine (use rice hulls if needed)

The mash is intentionally thin in order to encourage higher attenuation. Take this into account with strike temp. It may need to be 1-2 degrees cooler than normal.

Author:

Boil Size: 230 Litres

Boil Time: 60

Boil Gravity: 1.065

Efficiency: 70

Mash Thickness: 3.1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/8/2015 7:34 PM

Notes:

Author:

Boil Size: 27 Litres

Boil Time: 65

Boil Gravity: 10.8

Efficiency: 60

Mash Thickness: 3.1

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 21 ° C

Priming Method: Table sugar

Priming Amount: 160

Creation Date: 9/2/2015 3:02 PM

Notes:

Author:

Darrach

Boil Size: 32.5 Litres

Boil Time: 60

Boil Gravity: 1.035

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/23/2015 9:51 PM

Notes: Porridge is oat and milk, so this is both a sweet and milk stout. I've balanced the sweetness with a high alcohol content to give the impression of bitterness without actually taking from the sweetness. Tempered with aroma hops, this is an unusual Irish stout, usually associated with dry astringency. A great option for those who can't quite take to Guinness.

Author:

PintOfBuer

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.035

Efficiency: 53

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/21/2015 8:33 PM

Notes:

Author:

Boil Size: 40 Litres

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 75

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 22 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/28/2015 7:12 PM

Notes: