All-grain Homebrew Beer Recipes | Page 605 | Browse 225,000+ at Brewer's Friend

Author:

dbrowning

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.044

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/18/2014 11:55 AM

Notes:

Author:

Davy Pasternak

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/21/2011 3:19 PM

Notes:

Author:

labninja

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/10/2014 1:52 PM

Notes: https://www.brewtoad.com/recipes/old-speckled-hen-clone-1

Author:

pointofview

Boil Size: 7.25 Gallons

Boil Time: 60

Boil Gravity: 1.066

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/18/2015 4:35 PM

Notes:

Author:

Tom Nuss

Boil Size: 19 Gallons

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 85

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/19/2015 10:13 PM

Notes: Recirculate mash at 154 40min
Sparge at 168

http://byo.com/stories/issue/item/600-esb-style-profile

BEST Red X malt is specially created for brewing red-tinted beers. You can use BEST Red X for up to 100% of your grain bill – no other malt is required. Offering exceptional reliability and optimal processability, BEST Red X can be employed to brew consistently fiery beers with intense reddish hues. Its full-bodied flavor and attractive, unique color coupled with easy handling in the brewery, make BEST Red X the best choice for creating a broad range of new beers, such as red-tinted wheat beers.

As with all BEST malts, BEST Red X is produced using a special malting procedure exclusively from two-rowed summer brewing barley from recognized and thoroughly tested barley varieties.

Use: Basemalt for all red beers.

Perfectly suited for amber beer, wheat beer, altbier, ale, dark beer as well as for other beers.

Color:28-32 EBC / 11-13 L

Author:

Cangan

Boil Size: 33 Litres

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/27/2015 1:45 PM

Notes:

Author:

BrewHop

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: 1.06

Efficiency: 30

Mash Thickness: 1.2

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/6/2014 5:44 AM

Notes: I would recommend this yeast because it leaves a bit of residual malt behind. Extract can tend to leave a bit of residual sugar behind (sometimes too much) which is why I subbed in some corn sugar, if you use it put it in a 10min. If you don't want to use it the beer will end up around 6% with an estimated OG of 1.060. It's really up to you. I would recommend using 2 vials of yeast for this brew because the OG is a bit higher. If you don't want it spicy hop flavor sub out the Willamette addition for cascade. You could also use centennial instead of cascade. Let me know if you want to dry hop but I would do it with a couple ounces of cascade or centennial. I looked at the rise up red and it said it's pretty much all cascade and centennial. If the AA% is way off let me know and I can update it and send you a correction. If you can keep fermentation temps below 70F that would be ideal too, especially if it has been hot in the "Hood". Happy Brewing!

Author:

Gastamm

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.044

Efficiency: 70

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/21/2019 2:09 AM

Notes: Boil just 10 mins after all wurt in kettle. Cool to around 100 degrees. Add Lactobacillus. Use C02 thru ball valve in kettle at low PSI to blow out O2. . Let sit for around 2 days or until reach PH of 3.5 to 3.7 (taste test what tartness you like). Boil as normal for 60 mins then cool and transfer to fermenter and pitch with Voss Kveik yeast.

Author:

Genus Brewing

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/8/2017 12:30 AM

Notes:

Author:

FBorrego

Boil Size: 28 Litres

Boil Time: 60

Boil Gravity: 1.034

Efficiency: 68

Mash Thickness: 3.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 18 ° C

Priming Method: Injection

Priming Amount: 2ml (5.5g/L)

Creation Date: 5/1/2017 2:08 AM

Notes: Fermentation (Primary): 18c for 10 days
Fermentation (Secondary): 2 days with +1c per day
Cold Crash: +4days at 0c

Author:

John Abrahamsen

Boil Size: 45 Litres

Boil Time: 90

Boil Gravity: 1.068

Efficiency: 75

Mash Thickness: 3.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 8 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/12/2017 3:51 PM

Notes:

Author:

Kalaskai

Boil Size: 30 Litres

Boil Time: 60

Boil Gravity: 1.06

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/6/2017 8:07 AM

Notes:

Author:

Holzwama

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.118

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/7/2017 8:27 PM

Notes:

Author:

RustyBarrelHomebrewing

Boil Size: 8 Gallons

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 59

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/1/2022 5:19 PM

Notes: =
2/11/22 kegged. Fg 9.5 brix with 1.06 wort correction looks like 1.014 for 7.86%abv not bad.
=============================
2/7/2022
brew day was a pain in the ass. tried using biab bag but mash was still stuck on and off, pump on and off, temps all over the place. removed the bag but still stuck. i think the oats.

then the pump was again stuck on knockout, could not get it to work at all. had to siphon the wort out the top and strain with hand strainer smh.

but we got an OG of 1074 for 5.5 gallons - this recipe minus the oats shouldve been 1076 so this counts as pretty close to spot on. so updating the efficiency now from 65 to 58. to reflect this so next time wont have to do this wonky math.

original projected abv was 8.5 but we deliberately over estimated. updated recipe projected abv of 7.8 we were shooting for 8.0

==============================
2/1/2022
bout to rebrew this for tre bday. adjusting volumes and efficiency for most up to date stats. gonna use hothead for time constraint.

could consider pulling some voss off the wheat beer and use that? its not performing so vigorously on the wheat though

==============================
12/3/2021
did not take down FG. the beer tasted amazing but turned brown after about a week. mustve oxidized during kegging or carbonating (shook keg) but it really tasted great, a lot of tropical fruity flavor and smell. not sure what hops are in this blend. detected a small amount of galaxy in it.

==============================
10/5/2021
Brew day. Updating to 68% efficiency for 1080 OG. Not sure volume tho

==============================
10/4/2021
removing DME. this will be the first brew on the grainfather so im hoping to not get abysmal efficiency - predicting/bumping efficiency up from 52 to 63 for 7.8%abv.

also starting from primo (RO?) water and building to "light colored and hoppy" BF profile.
==============================
9/30/21
BRANCHING OFF ZAMBA HAZY FOR SITIVA HAZY

pretty much going to brew it the exact same grain bill and hop profile, may leave out the warrior, and using rva 132 instead of kveik.

TODO : need to fill in AA on sitiva

==============================
6/17/21
1.015 measured FG on 6/17/21 for 7.75%abv

==============================
6/10/2021
Brew day. Ended up with too much wort, again. Forgot to cook oats but I did double crush. Still only got 50% eff wtf. Adding 2 lb dme to try to save it. Adjusting the attenuation to convince myself kviek will go down to 1012 and 8%. Bad brew day

==============================
5/14/2021
Initial recipe creation,
grain bill : copying DRIP 3. boosting a little bit. changing eff to 60 i think we should be able to do that especially with cooked oatmeal. pay more attention to volumes. try not to end up with too much wort!

hops : will feature zamba. single hop. composing schedule based on blueberry yum yum. even split between 5 min, flameout, high krausen and standard dry hop (maybe keg)

yeast : prob would be better with london, but will consider kviek

water : thinking i will use tap. acid malt for pH. we have observed better results in west coast with water adjustments, maybe we try here too?

==============================
2/3/2021. Did not make it into feb. Its about 40 days since it was kegged, less than that since canned. The canned beer stoll looks nice and smells and tastes better than some commercial stuff but it's too bitter and lost a lot of spunk. For this next time I think we need to nail down the gravity, nail down the ph. Ditch the warrior and do like a full lb total hops and do like 1/3 hop bill in whirlpool. Try to limit oxidation in transfers but I dont think that is the main problem here. Consider doing some water adjustments. I wonder how the west coast ipa water profile would do for this.
==============================
12212020 updating recipe here to reflect what i did. please reference previous versions of this recipe for the original/correct recipe. realized i didnt have any real citra during brew day so i overloaded on mosaic and used a little citra noble. then in dry hop i did something off script as well cant remember what but i think i mightve done 4 oz citra and 2 oz mosaic?

efficiency was bad, target 1072 actual 1065. bad ph reading. not sure what happened but maybe some issue with water. need to examine water profile from tap and/or build a custom profile from scratch.
==============================
12162020 recipe was drastically changed. Bad ph (4.97. wtf?) on brew day and wrong hops. Anyway also used London 3 new pack with 1 day starter expected 1017 FG instead of reused hothead 1010 FG changing that now.
==============================
11/23/2020
planning for brew 3. last one was indeed way off, not sure why, see theories below. this time bumping up 2row and wheat to get to 8%. thinking about switching from kviek and use regular london just because of my chamber and compatibility with other stuff going on. also thinking about possibly modifying water profile. thinking about brewing 10 gals eek. possibly bumping up the hops?
===============================
10/2/2020
kegged this a couple days ago. really hot with hop burn. and kind of a rubber smell and taste. i wonder if i pushed this kveik too far. also i have not been cleaning it from trub and it could possibly have gelatin protein gunk it in? not sure. prob need to start again with a fresh pitch. anyway the first pint was pretty bad tasting and the second i drank last night was also but a little better. maybe hop burn will subside. its only about 10 or 11 days out from brew day. some ipas taste better after a couple weeks. maybe itll improve.
===============================
9/9/2020
bumped up 2 row from 7.5 to 9.5, boosted up oats. not sure how efficiency will be but im assuming 65% without the oats factored in. with oats added im assuming it drops to 55. could be wrong. maybe the gravity is the problem.

added 4 more oz hops.

TODO : should figure out water...
this has sample profile but has bicarbonate instead of alkalinity :
https://www.clawhammersupply.com/blogs/moonshine-still-blog/juicy-neipa-new-england-ipa-recipe

maybe think about searching brewersfriend for one

===============================
6/28/2020
brewed tue 6/23
dry hopped fri 6/26
cold crash sun 6/28
keg & carb mon 6/29
can tue 6/30

im not finding any research on kveik needing cleanup / diacetyl rest time after terminal gravity?? some places are saying you can rack it 36-72 hours after pitch

===============================

this one is a combination of the hop profile of all the rage
* https://www.brewersfriend.com/homebrew/recipe/view/520206/all-the-rage-conan-alt-mini-mash-30min-

and the grain bill from please come to boston
* https://www.brewersfriend.com/homebrew/recipe/view/978461/please-come-to-boston-neipa

but also using hothead kveik yeast for this thing. this is the first beer with henrico water profile input and pH estimates observed, as such will be adding some acidulated malt to hopefully bring the mash pH down

Author:

2beornot2be

Boil Size: 70 Litres

Boil Time: 60

Boil Gravity: 1.063

Efficiency: 70

Mash Thickness: 3.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 10/26/2021 4:57 PM

Notes:

Author:

LeoBrew

Boil Size: 37.35 Litres

Boil Time: 90

Boil Gravity: 1.038

Efficiency: 68

Mash Thickness: 6

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/26/2017 2:59 PM

Notes:

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/25/2016 4:40 AM

Notes:

Author:

Maxmester

Boil Size: 49.2 Litres

Boil Time: 60

Boil Gravity: 1.035

Efficiency: 70

Mash Thickness: 2.7

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/18/2016 8:16 AM

Notes: Fermentation:
2days 18degC
12days 20degC
2 cold crash (bring temp down to 1-2degC)

Carbonation 6g/l table sugar for 14 days in room temperature (20-22degC).

Storage after carbonation (recommended): 2-3 weeks in cold environment.

Author:

carusoat

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.058

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/13/2016 11:03 PM

Notes:

Author:

DanielDanTastic

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.073

Efficiency: 80

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/31/2016 9:40 PM

Notes: Add a Belgian waffle or Belgian cookies w/whirfloc & yeast nutrient at 10 min. Add candi syrup (medium & dark - 1lb each) at high krausen.