All-grain Homebrew Beer Recipes | Page 167 | Browse 220,000+ at Brewer's Friend

Author:

rolandblais

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.059

Efficiency: 70

Mash Thickness: 1.4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/1/2017 4:28 PM

Notes: The grains are a total guess, used in those amounts to get the Gravity I ended up at when fermentation started. If/When I track down the actual recipe, I'll adjust accordingly.

From the authors:

"This beer's OG should be 1.059 and its FG 1.011."

This 2 gallon batch was created by using 2 1 gallon Brooklyn Brew Shop Mojito Ale kits.

https://brooklynbrewshop.com/products/beer-making-mix-mojito-ale

Instructions are outlined here, but my mashing mashing was done "BIAB" style, no sparging.

https://brooklynbrewshop.com/pages/instructions-mojito-beer

1: The Mash
During The Mash, you're extracting all the sugars, color and flavor you can from grain. You're basically just steeping grain in hot water. It's a lot like making oatmeal.

Heat 2 quarts (1.9 liters) of water to 160°F (71°C).
Add grain (This is called “mashing in.” Take note of jargon. Or don’t).
Mix gently with spoon or spatula until mash has consistency of oatmeal. Add water if too dry or hot. Temperature will drop to ~150°F (66°C).
Cook for 60 minutes at 144-152°F (63-68°C). Stir every 10 minutes, and use your thermometer to take temperature readings from multiple locations.
You likely don’t need to apply heat constantly. Get it up to temperature, then turn the heat off. Monitor, stir, and adjust accordingly to keep in range.
After 60 minutes, heat to 170°F (77°C) while stirring constantly (“Mashing Out”).

2: The Sparge
If you're familiar with brewing coffee, you should have an idea of how The Sparge works. During The Sparge, you put the grain in a strainer and pour hot water over it to draw out all those sugars you created during The Mash.

Heat additional 4.5 quarts (4.26 liters) of water to 170°F (77°C). (If possible, start this during The Mash to save time.)
Set up your “lauter tun” (a strainer over a pot).
Carefully add the hot grain mash to the strainer, collecting the liquid that passes through.
This liquid is called “wort” (pronounced “wert”). It will be your beer.
Slowly and evenly pour 170°F (77°C) water over the mash to extract the grain’s sugars.
You want to collect 5 quarts (4.75 liters) of wort. You will lose about 20% to evaporation later on, so you want to start with a bit more than you’ll end with.
Re-circulate wort through grain once.

3: The Boil
The Boil is probably the easiest step to understand because it's as simple as it sounds. During this step, you're bringing your wort to a low, rolling boil and keeping it there for a period of time while adding things like hops or spices. It's a lot like cooking a soup or stock in that you'll add heartier or bittering ingredients toward the beginning and more delicate and aromatic ingredients toward the end.

In a pot, heat wort until it boils.
Keep boiling until you’ve hit the “hot break” (Wort will foam - you may need to reduce heat slightly so it doesn’t boil over.)
Stir occasionally. All you want is a light boil – too hot and you lose fermentable sugars and volume.
The boil will last 60 minutes. Start your timer and add in the rest of the ingredients at these times:
Add 1/4 Hops at start of boil.
Add 1/4 Hops 30 minutes into the boil.
Add 1/4 Hops 45 minutes into the boil.
At 60 minutes turn off heat. Add remaining Hops, Fresh Mint, and Lime Peel. Dissolve Candi Sugar.
Twenty percent of the wort will have evaporated in this step leaving you with 1 gallon (3.8 liters) of wort. If your boil was a bit high, the surface area of your pot extra large, or you brewed on a really hot day, you may have less than the full amount. Don’t worry – you just reduced your beer a bit too much, but you can add more water in the next step

4: Fermentation
This is when your beer actually becomes alcoholic. During Fermentation, your jugs should sit somewhere out of the way (and out of direct sunlight) while ale yeast turns sugar into alcohol.

Place brew pot in an ice bath until it cools to 70°F (21°C).
Once cooled, place strainer over funnel and pour your beer into the glass fermenter. Yeast needs oxygen. The strainer helps aerate your wort and clarify your beer (as well as catch any sediment from going into the fermenter). Add tap water to bring wort up to 1 Gallon mark if level is low.
“Pitch” yeast. (Toss the whole packet in.)
Shake aggressively. You’re basically waking up the yeast and getting more air into the wort.
Attach sanitized screw-top stopper to bottle. Slide rubber tubing no more than 1” (2.5 cm) into the stopper and place the other end in small bowl of sanitizer solution. You’ve just made a “blow-off tube”. It allows CO2 to escape.
Let sit for two or three days or until vigorous bubbling subsides. This is when fermentation is highest. You may notice bubbles and foam at the top of the beer. After bubbling calms down, clean tubing and ready your airlock.
Sanitize, then re-assemble airlock, lling up to line with sanitizer.
Insert airlock into hole in stopper.
Keep in a dark place at room temperature for two weeks without disturbing other than to show off to friends. (If beer is still bubbling, leave sitting until it stops.)
In the meantime, drink beer with self-closing swing tops, or ask for empties at a bar that has some. If you have a bottle capper and caps, you can save two six packs of non-twistoff beers instead.

5: Bottling (2 Weeks Later)
Once your beer's in bottles, it carbonates naturally with the help of just a little extra sugar. It wakes up your ale yeast (that went dormant during fermentation) to create just enough bubbles for some nice fizz.

Thoroughly rinse bottles with water, removing any sediment.
Mix remaining sanitizer with water.
Fill each bottle with a little sanitizer and shake. Empty after two minutes, rinse with cold water and dry upside down.
Dissolve 3 tablespoons honey with 1/2 cup water. Pour into a sanitized pot. You will be siphoning your beer into the same pot in the next steps.
Carbonation comes from adding sugar when bottling, so if you filled your jug with less than the full gallon in the last step, use less honey when bottling. Using the full amount can result in your beer being over-carbonated.
Siphoning (It all happens pretty fast. You may want to practice on a pot of water a few times.) To see it in action first, watch the How to Bottle video at brooklynbrewshop.com/instructions.
A. Attach open tubing clamp to tubing.
B. Fill tubing with sanitizer.
C. Attach sanitized tubing to the short curved end of your sanitized racking cane. Attach the black tip to the other end - it will help prevent sediment from getting sucked up. It will probably be a snug fit, but you can get it on there.
D. Pinch tubing clamp closed.
E. Remove screw-cap stopper and place racking cane into jug, just above the sediment at the bottom (“trub”).
F. Lower end of tubing not connected to racking cane into sink. Suction will force beer up and through the racking cane and tubing. Open tubing clamp, let sanitizer flow into sink until beer just starts to flow out of the tubing, then clamp shut. Open clamp on tubing, allowing beer to flow into pot with sugar solution. Tilt jug when beer level is getting low, but be careful in not sucking up the trub.
Siphon beer from pot into bottles, pinching tube clamp to stop flow after each bottle.
Close bottles.
Store in a dark place for 2 weeks.

6: Enjoy (Two Weeks Later)
You did it! You made beer.

Put beers in the fridge the night before you drink them.
Drink. Share with friends if you’re the sharing type.

Author:

lyng1

Boil Size: 28.5 Litres

Boil Time: 90

Boil Gravity: 1.062

Efficiency: 78

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/20/2016 7:36 PM

Notes:

Author:

Richard F Shoff Jr

Boil Size: 8 Gallons

Boil Time: 90

Boil Gravity: 1.044

Efficiency: 75

Mash Thickness: 1.33

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 2.0

Primary Temp: 50 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/21/2016 2:50 AM

Notes: 3.7 liter yeast starter at 1.040 gives a pitch rate of 2.07M cells/ml/*P

Won 1st Place Salt City Brew Club AHA/BJCP Sanctioned event 39pts September 2016

Author:

Gulating Tromsø

Boil Size: 55 Litres

Boil Time: 90

Boil Gravity: 1.066

Efficiency: 80

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: 16

Creation Date: 6/19/2017 4:40 PM

Notes:

Synes 800g gir en balansert smak av aprikos. Om man ønsker å komme enda nærmere originalen kan man øke til ca 1000g som man har laget til en pure.

Og dette skal tilsettes etter stormgjæring på dag 5

Etter dette skal ølet flaskes og det skal tilsettes 6.5 gram sukker per liter øl du har. Og denne blandingen lages med ca 4 DL vann som kokes og kjøles ned før dette tilsettes i vørteren.

Author:

NDB

Boil Size: 29.3 Gallons

Boil Time: 90

Boil Gravity: 1.044

Efficiency: 73

Mash Thickness: 1.33

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/16/2017 10:43 AM

Notes:

Author:

Garrett

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 60 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/28/2014 5:53 PM

Notes: K2... exactly what your thinking. fresh white peak head on top of a golden towering glass. K2 is the highest point of the Karakoram Range. So whether its a game of GNAR or back country or just cruising the Blues, wipe the POW from your brow, kick back with 5.5 gallons and your buds.

Enjoy the re-hydration process. You've never had a day so good!

Author:

jjadamsfb

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/4/2013 12:35 AM

Notes: Step by Step
Mill the acidulated malt. Place it in a grain bag and steep using 1.0 gallon (3.8 L) of 154 °F (68 °C) water for 45 minutes. Rinse the grain bag with about 2 quarts (1.9 L) of water and allow it to drip into the kettle for about 15 minutes, but be sure not to squeeze the bag.
Add enough water for a pre-boil volume of 6.0 gallons (23 L). Stir in both malt extracts and begin the boil. The total wort boiling time for this recipe is 60 minutes. At the onset of a full rolling boil, add your scheduled hop addition. When there are 15 minutes remaining in the boil, be sure to add your Irish moss or Whirlfloc® tablet to help with precipitation of the hot break. At 10 minutes remaining, add both the ground coriander seed and the salt.

Cool the wort to 68 °F (20 °C), transfer to your fermentation vessel and aerate the wort adequately. Add the contents of your yeast starter to the chilled wort. Ferment around 68 °F
(20 °C) until the final gravity is reached, which should be in 5 to 7 days.

Rack to a secondary vessel and allow the beer to mature another 5 to 7 days around the same temperature. Your beer is now ready to rack into a keg or bottles along with the priming sugar.

Author:

Boil Size: 12.6 Gallons

Boil Time: 90

Boil Gravity: 1.034

Efficiency: 73

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/18/2016 5:48 PM

Notes: Strike with 5.8 gal. at 163 for rest at 148 - (90 min.)
Collect 3.33 gal.

Sparge with 9.25 gal. at 180 for rest at 168 - (15 min.)
Collect 12.6 gal.
Pre-boil OG is 1.032

Ferment at 68

Author:

steinmb

Boil Size: 14.7 Litres

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 71

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/26/2014 10:21 PM

Notes: Finishing Gravity 1.014

Author:

ABogh

Boil Size: 11.5 Gallons

Boil Time: 60

Boil Gravity: 1.063

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/3/2015 3:12 AM

Notes:

Author:

jhanson1526

Boil Size: 8.5 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 70

Mash Thickness: 2

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/1/2016 11:29 PM

Notes:

Author:

UKHoopsfan

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.036

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/29/2015 2:28 AM

Notes:

Author:

Alohagirl

Boil Size: 32 Litres

Boil Time: 90

Boil Gravity: 1.043

Efficiency: 90

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 10 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/17/2015 8:12 AM

Notes: After 0 minute hop addition, let wort rest for 20 minutes. Give a good stir after and chill using wort chiller.

15C for around 48 Hours until low krausen is seen
10C leave it for 3 weeks
16C leave for 48 hours - take FG reading
Lager at 2C for 4 weeks before drinking

Author:

monkeyhaiku

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.052

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/26/2016 5:10 AM

Notes:

Author:

BCarlson

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 73

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/31/2016 4:24 AM

Notes: Swapped out brown malt for Special Roast malt
Reduced Brown from 1.5lb to Roast 1lb

Author:

poptart

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/25/2013 12:43 AM

Notes: http://www.homebrewtalk.com/f70/lemon-lime-hefe-weizen-255659/

Author:

k_mcroberts@hotmail.com

Boil Size: 8 Gallons

Boil Time: 90

Boil Gravity: 1.058

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: Gyle

Priming Amount: N/A

Creation Date: 11/26/2014 2:37 AM

Notes: 10 ml hop shot = 100 ibu's to be added to total

Author:

That Guy

Boil Size: 21.79 Litres

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 80

Mash Thickness: 3.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 22 ° C

Priming Method: sucrose

Priming Amount: 179.4 g

Creation Date: 8/28/2013 9:53 AM

Notes: Single step mash at 64 degrees (for a long time).
Munich malt removed and Abby malt increased.
Maple sirup removed and sugar increased.
Boil time reduced to 60 mins.
Batch sized for secondary fermenter (16 L)

Author:

Boil Size: 8.5 Gallons

Boil Time: 90

Boil Gravity: 1.045

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/20/2015 7:19 PM

Notes:

Author:

Jason Franssen

Boil Size: 7.26473 Litres

Boil Time: 90

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/15/2012 6:37 AM

Notes: Epic Pale Ale clone using NZ Cascade instead of US Cascade. No IC, I used overnight chill method. About 5L of trub in the bottom of my fermenter PRE yeast pitch. Next time I would siphon out of the pot, or use a hop bag.