Partial-mash Homebrew Beer Recipes | Page 84 | Browse 5,000+ at Brewer's Friend

Author:

HarrisonR

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/20/2013 2:32 AM

Notes: Full Bodied, mostly English style ale, with a moderate hop bitterness. Dark red in colour, the heavy maltiness is balanced by the soft bitterness of the Target hops, with a noticeable citrus flavor from the cascade hops on the finish. Quite alcoholic (my actual abv was 6.3%) so it gets the job done.

Author:

Mike Foster

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/12/2013 10:24 PM

Notes:

Author:

angus fae edunburgh

Boil Size: 90 Litres

Boil Time: 60

Boil Gravity: 1.075

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/17/2016 10:11 AM

Notes:

Author:

Boil Size: 5.2 Gallons

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: 64 ° F

Priming Method: c02

Priming Amount: N/A

Creation Date: 6/8/2016 5:58 PM

Notes:

Author:

Yenren

Boil Size: 232 Litres

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/17/2015 12:52 PM

Notes:

Author:

Colin McKinlay

Boil Size: 1 Gallons

Boil Time: 30

Boil Gravity: 1.035

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/31/2018 4:07 PM

Notes:

Author:

Rogerio DaSilva

Boil Size: 3.5 Gallons

Boil Time: 90

Boil Gravity: 1.102

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: 1.0

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/31/2017 2:00 PM

Notes: Water for partial mash: dilute water with distilled or RO water, if needed, to below 100 ppm carbonates (bicarbonate ions (HCO3–) or “alkalinity as CaCO3”), add calcium, if needed, to make 100 ppm Ca2+, use 3:1 ratio of gypsum and calcium chloride for adding calcium ions
(for dilution: filtered tap water)
Procedure:
1. Make yeast starter 2–3 days ahead of brew day.
2. On brew day, heat 4.1 qts. of brewing liquor to 165 °F and mash grains at 154 °F for 60 minutes. Stir every 8 minutes or so, if you can do so without losing a significant amount of heat.
3. Collect around 1.75 gallons of wort. Add water to make at least 4.0 gallons of wort. Stir in roughly 1/2 of the malt extract, hold at 154 °F for 5 minutes, then bring to a boil.
4. Boil the wort for 90 minutes. (If hot break does not appear as big, fluffy flakes after first 15 minutes of boil, add 0.5 tsp. gypsum.)
5. Add hops and Irish moss / whirfloc at times indicated. Add water, if needed, so boil volume never drops below 3.5 gallons.
6. Dissolve remaining malt extract in wort and stir in with 10 minutes left in boil. (You can do this in shifts.)
Option: add Fermax 0.5 tsp per gallon as yeast nutrient, 15 minutes before the end of boil.
7. Chill wort to 70 °F. If using an immersion chiller, swirl chilled wort and let sit for at least an hour (covered) to let hop debris settle.
8. Transfer wort to fermenter, leaving as much hop debris and trub behind as possible. Add water to yield 5.0 gallons.
9. Aerate the wort thoroughly and pitch sediment from yeast starter.
10. Ferment at 70 °F. If dry hopping in a keg, let beer fall (at least mostly) clear before racking.
11. Dry hop for 7 days. Avoid exposing beer to oxygen as much as possible when transferring wort and dry hopping after fermentation.

Double Dry Hopped Option:
Note to make the Double Dry-Hopped version, remove the first charge of dry hops and add a second charge of the same amount. You can use more Centennial. Simcoe, Citra or Amarillo also work really well.

Author:

mytdil6

Boil Size: 2 Gallons

Boil Time: 60

Boil Gravity: 1.169

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/28/2015 4:57 AM

Notes:

Author:

Boil Size: 11 Litres

Boil Time: 60

Boil Gravity: 1.079

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/31/2015 7:25 AM

Notes:

Author:

rrenaud

Boil Size: 4 Gallons

Boil Time: 60

Boil Gravity: 1.075

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: 0.5

Primary Temp: 75 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/11/2016 1:38 AM

Notes: made 2L starter at 1.020 for both yeasts, left overnight.

DME added in last 10 minutes, likely higher IBUs than the calculator thinks.

Belgian Saison got the overnight mash.

3724 starter smelled beery.
568 started smelled super fruity and delicious.

sampled 3724 after 2.5 days, SG at 1.022, beer tastes good, creamy, sweet, estery, maybe bubble gum or cotton candy? after 9 days, SG at 1.015, not nearly as bubble gummy as it was, TBH, it's a bit worse. after 3 weeks, gravity at 1.007, tastes good, reminds me of hennepin, smell has a bit of not entirely pleasing fermentation character.

sampled 568 after 5 days, refractometer says 6.2 brix, smells a little sulfury, not very good tasting. after 13 days, refractomter says 6.5. smell still maybe sulfury, tastes very good though, very rich in soft, fruity esters. finished at 1.008, some of the fruitiness is gone (should have served it asap?).

Author:

Mike Sanchez

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/24/2012 3:19 AM

Notes:

Author:

Paul Miller

Boil Size: 3.01156 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/2/2011 4:41 AM

Notes:

Author:

Jen Asbury

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/8/2012 12:11 AM

Notes:

Author:

Loomis

Boil Size: 5.5 Gallons

Boil Time: 90

Boil Gravity: 1.061

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: 0.5

Primary Temp: 70 ° F

Priming Method: Force Carb

Priming Amount: N/A

Creation Date: 9/4/2015 3:53 AM

Notes: Vanilla beans and bourbon soaked oak chips are to be added in secondary fermentor for 7 days following primary fermentation.

Author:

Benherrell

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.067

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/29/2015 8:41 PM

Notes:

Author:

JMcNair

Boil Size: 3.5 Gallons

Boil Time: 60

Boil Gravity: 1.108

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/15/2016 2:50 PM

Notes: @nd edition of the maple sap ipa. Boiled 3 gal of sap and let cool outside overnight. Boiled 3.5 gal and followed recipe. OG was around 1.074. Only concerns are that the sap had a bit of an off smell while boiling until I added the malt. Smelled and tasted good and bitter. Should be around 8% ABV. IBU will be much less than shown here. Date was 3/1/16 at 6:30 started to add malt. Ended cleaning at 8:30.

Author:

Andrew Coleman

Boil Size: 2.64172 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/26/2012 12:38 PM

Notes:

Author:

Roggum

Boil Size: 10 Litres

Boil Time: 60

Boil Gravity: 1.08

Efficiency: 59

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: 12 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/19/2016 2:02 AM

Notes: I had a recipe which needed a 15 litre pot (2.6kg of dry grain), so attempted to reduce to fit a 10 litre pot

Add the Nelson hops early - was supposed to be 15 and 10 mins. raised the IBU by from 27

Correct OG starting (19/6/16)

30 days ageing in bottles recommended

Author:

Scipion

Boil Size: 12 Litres

Boil Time: 60

Boil Gravity: 1.105

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: DME Amber

Priming Amount: 122

Creation Date: 10/30/2016 8:58 PM

Notes: AJOUT à l'eau:

-Plâtre: 3 g

-Epson: 2 g

-Sel: 3 g

Densité initiale mesurée: 1,045 = 6% ???

Au plus 12 litres de moût à fermentée (le grain n'a pas été égouttée)

MISE EN TOURIE: 7 novembre (bière pas beaucoup houblonné au goût -le houblonnage «fait» très Pils- mais le tout semble bien balançée)