Homebrew Beer Recipes | Page 719 | Browse 320,000+ at Brewer's Friend

Author:

Myndflyte

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.065

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/10/2017 11:34 AM

Notes: Bake pumpkin at 350F for 90 minutes, smash up and add to mash. Add honey to boil kettle.

Author:

BPo Brews

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 70

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/9/2022 4:29 AM

Notes:

Author:

Todd Cogswell

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 75

Mash Thickness: 1.33

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 70 ° F

Priming Method: co2

Priming Amount: N/A

Creation Date: 7/3/2020 4:21 AM

Notes:

Author:

Kaarlo

Boil Size: 18.5 Litres

Boil Time: 60

Boil Gravity: 1.053

Efficiency: 77

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: N/A

Priming Method: co2

Priming Amount: 1.04 bar

Creation Date: 7/22/2019 5:18 AM

Notes:

Author:

Sugar250

Boil Size: 36.5 Litres

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 62

Mash Thickness: 3.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/12/2019 1:04 PM

Notes: 1주후 3월3일
냉동딸기 1.3kg 2개
생바질 30g

1주후 3월10일 통갈이후
생바질 30g 홉 Amillo+MOTUEKA 37g

1주후 3월 17일 병입

Author:

PeddyOfficer

Boil Size: 65 Litres

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 80

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/17/2018 4:29 PM

Notes: Hva jeg fikk fra Vestbrygg:

Maris Otter, 7kg
Caramalt 30EBC, 2,4kg
Munic malt 2 22EBC, 1,7kg
Crystal Malt 150EBC, 1kg
Dark Crystal 300EBC, 0,4kg

Mesket med veldig god gjennomstrømning. Likevel lavere effektivitet enn forventet. 80% mot konservative 85% som mål.

Mesk:
CaCL2: 17g
CaCO3: 6g

Skylling:
CaCL2: 8g

Erstatte vann i malt, 12l. Pluss 8l tilsatt for å nå OG. (55l + 8l)*1,04 = 65l til kok

Author:

Boil Size: 30 Gallons

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 75

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/28/2016 7:39 PM

Notes:

Author:

wyeasty

Boil Size: 10 Gallons

Boil Time: 60

Boil Gravity: 1.038

Efficiency: 80

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/25/2016 4:11 AM

Notes: Would normally use 1084 irish ale...
But decided to make neobritania a house strain and just wanted to try it at a dry irish stout...

Author:

ardentmonk

Boil Size: 18 Gallons

Boil Time: 90

Boil Gravity: 1.04

Efficiency: 75

Mash Thickness: 1.4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 75 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/2/2015 7:41 AM

Notes: 3.5 L stir plate starter provides .84 M cells/ mL/P. 360g DME needed.

Mash temp was 64*C,Ph 5.15, batch sparge was ph 5.48 75*C

Author:

DrSherlock

Boil Size: 12.5 Gallons

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 60 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/4/2014 3:48 AM

Notes: Recipe From page 212 - Clone Brews
Flying Dog Brewery - Frederick Maryland, USA
_____________________________________________

Author:

Bdenny

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/4/2014 4:50 PM

Notes:

Author:

rodfon

Boil Size: 10 Litres

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 60

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 21 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/12/2016 10:02 AM

Notes: O floco de trigo é um ingrediente da segunda receita. Na primeira, a usada foi trigo não maltado. Já para o Opal, era uma adição de 9gramas em 10 minutos. Agora, tem-se 03 adições com Hopburst.

Author:

mccarltone

Boil Size: 2.5 Gallons

Boil Time: N/A

Boil Gravity: 1.037

Efficiency: 60

Mash Thickness: 3.38

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 75 ° F

Priming Method: Keg

Priming Amount: 12.3 psi

Creation Date: 3/4/2017 1:38 PM

Notes: Steps

1. 1-2 days before brewing make a 1 liter starter of 1.040 wort, and add your vial of WLP644. Let it sit at room temperature until use. Also make 1 liter of 1.040 wort, and pour OYL-605 into the starter. Incubate 24-48 hours at room temperature to increase the cell count.

2. Mash in at 145°f for 60 minutes; if hops have to be used, make sure to add the hops to the mash.

3. Sparge as normal.

4. Bring the wort to a boil, add salt and coriander, and then turn the heat off (no need to boil for more than a couple of minutes).

5. Adjust PH ~4.2 to limit growth Clostridium butyricum and other potential off-flavor bacteria. Not necessary, but this is a best practice suggestion. See How to Pre-Acidify for instructions.

6. Chill the wort down to 95°f, and transfer to a CO2 purged carboy or keg. Add the 1 liter of OYL-605 Lactobacillus Blend starter. Allow it to sour for 24 hours. No external heating is required.

7. After the souring phase, chill the soured wort down to ~70°F and pitch WLP644 Trois (boiling to kill the Lactobacillus before adding the WLP644 Trois is optional; see kettle souring). You can aerate if you feel necessary. After 2 weeks a stable gravity should be reached.

8. Rack or transfer off as normal to bottles or a keg.

Author:

Patricio

Boil Size: 28 Litres

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 85

Mash Thickness: 3.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/30/2013 6:14 PM

Notes: Closed transfer to secondary (corney keg) with dry hops. Keep at ambient temp for 3-5 days before chilling for 2 days. Transfer to keg to serve. Use gelatine (0.5 tsp) to fine.

Author:

mclinde

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.049

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: 3/4 cup

Creation Date: 8/21/2017 4:28 PM

Notes: 2L starter, 205g of DME

Cinnamon whiskey mixed with nutmeg and ground cinnamon before adding

Author:

jimmyk

Boil Size: 8 Litres

Boil Time: 60

Boil Gravity: 1.065

Efficiency: 85

Mash Thickness: 2.7

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/4/2018 8:31 AM

Notes: Split batch & pour part into empty GIN 133 bottle to condition after fermentation.

Brewed 17/3/18
OG BRIX 19
Bottled 1/4/18

Author:

A

Boil Size: 8 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 85

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/11/2015 12:35 PM

Notes: OG 1.062

Tiny ass 5 gal primary fermenter full as fuck. This blows, my 6gal broke.

FG 1.008

Author:

Genus Brewing

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/14/2014 7:43 PM

Notes:

Author:

Wolf Pack Brewing

Boil Size: 30.5 Litres

Boil Time: 60

Boil Gravity: 1.095

Efficiency: 95

Mash Thickness: 2

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/22/2019 2:14 AM

Notes: https://shop.theelectricbrewery.com/pages/new-zealand-ipa

Based on Hopwired IPA

Add 500mg potassium metabisulphite to 20 gallons water to remove chlorine / chloramine (if required).
Water treated with brewing salts to our Hoppy flavour profile: Ca=110, Mg=18, Na=16, Cl=50, SO4=275 (Basically Randy Mosher's ideal Pale Ale numbers with slightly less Sulphate). For complete details on how to adjust your water, refer to our step by step Water Adjustment guide.
1.25 qt/lb mash thickness.
Single infusion mash at 152F for 90 mins.
Convoluted counterflow chiller
MORE INFORaise to 168F mashout temperature and hold for 10 mins.
~90 min fly sparge with ~5.6-5.8 pH water (measured at mash temperature). Collect 13.9 gallons.
Boil for 60 minutes, adding Whirlfloc and hops per schedule. Lid on at flameout after post-boil hops are added, start chilling immediately.
Cool the wort quickly to 66F (we use a one-pass convoluted counterflow chiller to quickly lock in hop flavour and aroma) and transfer to fermenter.
Aerate well. Pure oxygen from a tank may be used at a rate of 1 litre per minute for 60 seconds per 5 gallons.
Pitch yeast and ferment at 66-68F (wort temperature). We use modified stainless fermenting buckets in wine fridges.
Add dry hops once fermentation is nearing completion (i.e. 5 points from terminal gravity) and raise the temperature to 70-72F. In our case we simply turn off the fermenting fridges and allow the beer to naturally rise to room temperature. Steep hops for 3-5 days while fermentation finishes. Assume fermentation is done if the gravity does not change over ~3 days.

Author:

rolandblais

Boil Size: 1.6 Gallons

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 72

Mash Thickness: 1.7

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: MapleSyrup

Priming Amount: .5 oz

Creation Date: 2/28/2020 7:40 PM

Notes: This is a guesstimate, from a kit. Malt Bill is from their "Every Day IPA" recipe, with adjuncts noted.

Recipe kit:
https://brooklynbrewshop.com/collections/beer-making-mixes/products/milkshake-ipa-beer-making-mix

Instructions:
https://brooklynbrewshop.com/pages/instructions-milkshake-ipa

Pre-Brew: Sanitize
Sanitization is important, but it's nothing scary. When brewing, keep everything clean so that you give what you're brewing its best chance to succeed. So when preparing for brew day, wipe any crumbs off the counters. Move any clutter that might be in your way. Read through the rest of the instructions (at least through fermentation) so that you know what to expect. And have fun!

Dissolve half of your sanitizer packet with a gallon of water in a container. Save the second half for when you bottle.
Soak everything you are going to use, rinse with water, and let air dry on some paper towels. If it isn’t totally dry when you are ready to start don’t worry.
Keep the extra sanitizer in a container for now. Chances are you’ll want to re-sanitize something later.
Additional Ingredients Needed:

3 Tablespoons Honey
Ice
1 vanilla bean (optional)

1: The Mash
During The Mash, you're extracting all the sugars, color and flavor you can from grain. You're basically just steeping grain in hot water. It's a lot like making oatmeal.

Heat 2.5 quarts (2.4 liters) of water to 160°F (71°C).
Add grain (This is called “mashing in.” Take note of jargon. Or don’t).
Mix gently with spoon or spatula until mash has consistency of oatmeal. Add water if too dry or hot. Temperature will drop to ~150°F (66°C).
Cook for 60 minutes at 144-152°F (63-68°C). Stir every 10 minutes, and use your thermometer to take temperature readings from multiple locations.
You likely don’t need to apply heat constantly. Get it up to temperature, then turn the heat off. Monitor, stir, and adjust accordingly to keep in range.
After 60 minutes, heat to 170°F (77°C) while stirring constantly (“Mashing Out”).

2: The Sparge
If you're familiar with brewing coffee, you should have an idea of how The Sparge works. During The Sparge, you put the grain in a strainer and pour hot water over it to draw out all those sugars you created during The Mash.

Heat additional 4 quarts (3.8 liters) of water to 170°F (77°C). (If possible, start this during The Mash to save time.)
Set up your “lauter tun” (a strainer over a pot).
Carefully add the hot grain mash to the strainer, collecting the liquid that passes through.
This liquid is called “wort” (pronounced “wert”). It will be your beer.
Slowly and evenly pour 170°F (77°C) water over the mash to extract the grain’s sugars.
You want to collect 6 quarts (5.7 liters) of wort. You will lose about 20% to evaporation later on, so you want to start with a bit more than you’ll end with.
Re-circulate wort through grain once.

3: The Boil
The Boil is probably the easiest step to understand because it's as simple as it sounds. During this step, you're bringing your wort to a low, rolling boil and keeping it there for a period of time while adding things like hops or spices. It's a lot like cooking a soup or stock in that you'll add heartier or bittering ingredients toward the beginning and more delicate and aromatic ingredients toward the end.

In a pot, heat wort until it boils.
Keep boiling until you’ve hit the “hot break” (Wort will foam - you may need to reduce heat slightly so it doesn’t boil over.)
Stir occasionally. All you want is a light boil – too hot and you lose fermentable sugars and volume.
The boil will last 60 minutes. Start your timer and add in the rest of the ingredients at these times:

Add Columbus Hops at the start of the boil.

At 60 minutes turn off heat. Add Lactose Sugar and 1/3 Mandarina Bavaria Hops

Twenty percent of the wort will have evaporated in this step leaving you with 1 gallon (3.8 liters) of wort. If your boil was a bit high, the surface area of your pot extra large, or you brewed on a really hot day, you may have less than the full amount. Don’t worry – you just reduced your beer a bit too much, but you can add more water in the next step.

4: Fermentation
This is when your beer actually becomes alcoholic. During Fermentation, your jugs should sit somewhere out of the way (and out of direct sunlight) while ale yeast turns sugar into alcohol.

Place brew pot in an ice bath until it cools to 70°F (21°C).
Once cooled, place strainer over funnel and pour your beer into the glass fermenter. Yeast needs oxygen. The strainer helps aerate your wort and clarify your beer (as well as catch any sediment from going into the fermenter). Add tap water to bring wort up to 1 Gallon mark if level is low.
“Pitch” yeast. (Toss the whole packet in.)
Shake aggressively. You’re basically waking up the yeast and getting more air into the wort.
Attach sanitized screw-top stopper to bottle. Slide rubber tubing no more than 1” (2.5 cm) into the stopper and place the other end in small bowl of sanitizer solution. You’ve just made a “blow-off tube”. It allows CO2 to escape.

Let sit for two or three days or until vigorous bubbling subsides. This is when fermentation is highest. You may notice bubbles and foam at the top of the beer. After bubbling calms down, clean tubing and ready your airlock.

Open your fermenter and drop 1/2 remaining Mandarina Bavaria Hops into your beer. This is called dry hopping and will give your beer intense hop flavor.
Sanitize, then re-assemble airlock, filling up to line with sanitizer.
Insert airlock into hole in stopper.

1 week later drop remaining hops to your fermenter as a second dry hop. You can also add 1 vanilla bean split down the middle for added flavor.

Sanitize, then re-assemble airlock, filling up to line with sanitizer.
Insert airlock into hole in stopper.

Keep in a dark place at room temperature for two weeks without disturbing other than to show off to friends. (If beer is still bubbling, leave sitting until it stops.)

In the meantime, drink beer with self-closing swing tops, or ask for empties at a bar that has some. If you have a bottle capper and caps, you can save two six packs of non-twistoff beers instead.

5: Bottling (2 Weeks Later)
Once your beer's in bottles, it carbonates naturally with the help of just a little extra sugar. It wakes up your ale yeast (that went dormant during fermentation) to create just enough bubbles for some nice fizz.

Thoroughly rinse bottles with water, removing any sediment.
Mix remaining sanitizer with water.
Fill each bottle with a little sanitizer and shake. Empty after two minutes, rinse with cold water and dry upside down.

Dissolve 3 tablespoons maple syrup with 1/2 cup water. Pour into a sanitized pot. You will be siphoning your beer into the same pot in the next steps.
Carbonation comes from adding sugar when bottling, so if you filled your jug with less than the full gallon in the last step, use less maple syrup when bottling. Using the full amount can result in your beer being over-carbonated.

Siphoning (It all happens pretty fast. You may want to practice on a pot of water a few times.) To see it in action first, watch the How to Bottle video at brooklynbrewshop.com/instructions.

A. Attach open tubing clamp to tubing.
B. Fill tubing with sanitizer.
C. Attach sanitized tubing to the short curved end of your sanitized racking cane. Attach the black tip to the other end - it will help prevent sediment from getting sucked up. It will probably be a snug fit, but you can get it on there.
D. Pinch tubing clamp closed.
E. Remove screw-cap stopper and place racking cane into jug, just above the sediment at the bottom (“trub”).
F. Lower end of tubing not connected to racking cane into sink. Suction will force beer up and through the racking cane and tubing. Open tubing clamp, let sanitizer flow into sink until beer just starts to flow out of the tubing, then clamp shut. Open clamp on tubing, allowing beer to flow into pot with sugar solution. Tilt jug when beer level is getting low, but be careful in not sucking up the trub.
Siphon beer from pot into bottles, pinching tube clamp to stop flow after each bottle.

Close bottles.
Store in a dark place for 2 weeks.

6: Enjoy (Two Weeks Later)
You did it! You made beer.

Put beers in the fridge the night before you drink them.
Drink. Share with friends if you’re the sharing type.