Homebrew Beer Recipes | Page 276 | Browse 310,000+ at Brewer's Friend

Author:

Tom Davis

Boil Size: 26.5 Litres

Boil Time: 90

Boil Gravity: 1.048

Efficiency: 80

Mash Thickness: 3.64

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/31/2015 11:31 AM

Notes:

Author:

monkeyhaiku

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.058

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/25/2015 3:19 AM

Notes:

Author:

cha99jab

Boil Size: 30 Litres

Boil Time: 60

Boil Gravity: 1.063

Efficiency: 75

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 20 ° C

Priming Method: force carb keg

Priming Amount: 30L

Creation Date: 10/21/2013 4:57 PM

Notes: Based on the recipe for Societe brewings the Pupil IPA (tweaked the hops a little)
http://meekbrewingco.blogspot.ca/2014/05/brewing-societe-brewing-pupil-clone.html

Brew a 25L batch and then split into 2 fermentors. Dilute back to 1.062 so that one batch (16.6L) is 20L (1.6L WLP001 starter) and the other batch (8.4L) is 10L (1 vial funktown pale).

Brewed Sunday 1st March

18.5L strike water at 72.5oC gave a mash temp of 64.5. Stirred the mash after 20 mins (temp was 64).

Sparged with a little extra water for yeast starters. Approx 30L preboil vol and then topped up after 20 mins. Ended up boiling longer (90 mins). Preboil gravity 1.058.

Added sugar with 10 mins remaining in the boil.

Ended up short of target gravity. 24L at 1.065 diluted to 27L at 1.058. 18L WLP001. 9L conan/brett

Aim for mash pH of 5.4 (predicted) using:
Calcium Sulphate (Gypsum): 3g to strike water and 3g to the sparge water
Espsom salts: 2g to strike water and 2g to the sparge water
Calcium Chloride 1.5g added to the strike and sparge waters as 33% solution (not as dihydrate) so scaling / correction factor = 110.98 g/mol (anhydrous) / 147.014 g/mol (dihydrate) * 3 = 2.26. 1.5g x 2.26 = 3.4 mL.
Lactic Acid (88%): 6.9 mL added to strike water and 1.6 mL added to sparge water (to acidify to pH 5.4).

05/03/15 (Thursday) Day 5 - Beers moved from 17oC ambient "storage" to 21oC ambient "pan room".

06/03/15 (Friday) Day 6 - Funktown Pale (Brett IPA) = 1.016.

09/03/15 (Monday) Day 9 - WLP001 (IPA) = 1.009.

15/03/15 (Sunday) Day 15 - Dry hop 1 14g Mosaic + 14g Citra + 28g Nelson for IPA. 7g Mosaic + 7g Citra + 14g Nelson for Brett IPA.

19/03/15 (Thursday) Day 19 - Dry hop 2 added. Equal amounts.

22/03/15 (Sunday) Day 22 - Moved to attic to crash chill (~8oC ambient temp)

24/03/15 - Tuesday Day 24 - Kegged both beers without gelatine. Attic temp 12oC. Hooked up CO2 at 2.2 bar.

Author:

Mellow Fellow

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.06

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/26/2015 8:46 PM

Notes:

Author:

Mellow Fellow

Boil Size: 7.5 Gallons

Boil Time: 75

Boil Gravity: 1.046

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/1/2015 10:22 PM

Notes: Primary Fermentation 10 Days (Wyeast 1214)
Secondary Fermentation 6 Months (Wyeast 5335)
Rack then 10 days with lime juice & zest and dry hop.

10 Days conditioning in bottle

Author:

octopussy

Boil Size: 1 Gallons

Boil Time: N/A

Boil Gravity: 1.042

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/25/2016 10:21 PM

Notes:

Author:

Mickey

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: 1.029

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/21/2015 6:03 AM

Notes: This is a Lord of the Rings ale named for the Brandywine river. Tap on nitrogen.

Author:

against the grain

Boil Size: 9 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 80 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/30/2013 8:25 PM

Notes: this is a porter in the style before the creation of black patent malts. in this style a percentage of the first runnings were drawn off and boiled to a dark caramelized syrup and then added back to the boil to add color and caramel sweetness. so that will be a part of this recipie. after mashing is compleat (before sparge) take 3/4 of a gallon of first runnings and carefuly reduce to a dark syrup without burning. start the boil with the rest of runnings,sparge, hops and licorice. once the syrup is ready add it to the boil in the kettle.
side note, for this recipe also you need to steep the hops in 1q of 160•F water before adding, 30 min should be fine. when adding just throw all the hops and liquid into kettle. this is the way it was done in the later 1700s.

Author:

LaOnda70

Boil Size: 8 Litres

Boil Time: 60

Boil Gravity: 1.146

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 17.8 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/15/2014 7:56 PM

Notes:

Author:

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.134

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.5

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/23/2016 8:11 PM

Notes: Easy recipe to follow.

Boil your partial water (RO water) - about 2.5 gal.
Add liquid malt with flame off.
Add first hop addition
Add second hop additon.
Add whirlfloc tablet if you want, I didn't and it was very clear.
Cool to about 80 deg. Add cold RO water to fermenter and then add the wort. Add water to fill fermenter to top.
Check temp to match with yeast.
Add yeast.
Ferment about 70 for 2 weeks or a couple days after FG gets close to 1.01.
Transfer to keg.
I cooled the keg to 32deg for 3 weeks but it can be drunken in a week or two.

Author:

Solli

Boil Size: 26.5 Litres

Boil Time: 90

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/22/2012 8:55 PM

Notes: malt i på 37 grader

Author:

jturkish

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: 62 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/3/2013 12:35 PM

Notes:

Author:

bakerag

Boil Size: 5.5 Gallons

Boil Time: N/A

Boil Gravity: 1.156

Efficiency: 100

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/24/2017 4:55 AM

Notes: Prickly Pear Preparation
singe off needles
rinse
cut in half
boil in 2 gal of water for 2 hours
mash it up near the end of boil
strain through dish towel

mix juice and honey in fermentor
add 1 pkg Lalvin Champagne yeast EC-1118

Author:

dtwhite

Boil Size: 9 Gallons

Boil Time: 60

Boil Gravity: 1.036

Efficiency: 78

Mash Thickness: 2.1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/3/2016 6:59 PM

Notes: Normal mash at 155F, followed by sparge

1 hour boil time

Fermentation with The Yeast Bay Melange sour blend - took yeast from another beer aging in secondary (one thief full dropped right into the wort)

After the initial vigorous fermentation ended (aka saccharomyces fermentation), approximately 3 weeks, transferred to a secondary vessel with 2 cans of peach puree and 2oz of sanitized oak cubes, filling the 5 gallon fermenter all the way up to the neck

Experienced minor blowoff thanks to the fruit puree fermenting

Sampled every 2-3 months until done

Author:

Boil Size: 27 Litres

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 21 ° C

Priming Method: Cane Sugar

Priming Amount: 120g

Creation Date: 1/13/2016 10:07 PM

Notes:

Author:

cjnew

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.044

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/20/2015 1:00 AM

Notes:

Author:

Brewer's Friend Blog

Boil Size: 6.5 Gallons

Boil Time: 20

Boil Gravity: 1.042

Efficiency: 55

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/14/2021 4:22 PM

Notes: To highlight the robust strawberry jamminess of Sundew™ Ale (OYL-401), I built a recipe that would complement the Belgian and berry characteristics. Balancing the acidity and fruity berriness presents the key challenge to pairing Sundew with a fruited kettle sour

Using a basic malt bill of 50-50 wheat and 2-row, I chose to do a protein rest that helped to break down the beta-glucans and long protein chains adding to the body and making the lautering a little bit easier.

The finished product pushed fruit forward on the nose, with a nicely tart finish. The flavor profile highlighted a melding of strawberry puree and lemon zest to accentuate the aromatic berry yeast characteristic. A sure thirst quenching crowd-pleaser.

Recipe:
STATS:
Original Gravity:1.048
Final Gravity:1.015
Starting pH:5.6
Final pH: 3.18
ABV: 4.3
IBU:4.1
SRM:2.8

MALT (five gallon batch):
7 lbs 2-row
6 lbs White wheat

HOPS:
0.25 oz Tettnang (A.A. 4.3) dry hop after lactic acid production

FLAVORING ADDITIONS:
8 oz Vintners Harvest Strawberry Puree
2 lemon peels steeped in 0.5 liter of 212℉ of hot water

MASH:
Protein Rest: 122℉, 35 minutes
Saccharification: 148℉, 45 minutes
Mash Out: 168℉, 10 minutes

Boil for 20 minutes

SEQUENTIAL FERMENTATION:
Knock out at 95°F and allow the lacto to sour for 24 hours. The wort should be sufficiently sour (pH 3.2-3.4), at which point pitch Sundew and dry hop 0.25 oz Tettnang hops. After 1 week (or once fermentation is complete), add strawberry/lemon flavor and leave for an additional 48 hours for refermentation prior to kegging.

YEAST:
OYL-401 Sundew. The temperature range is relatively broad, from 64-78°F. We recommend a slight overpitch or a fresh starter for more berry notes. Sundew will shine at fermentation temperatures in the mid-70s.

LACTIC ACID BACTERIA:
OYL-605 Lacto. Blend of Lactobacillus plantarum and brevis. Sours across a broad temperature range.

Author:

ktucker

Boil Size: 4 Gallons

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 62 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/22/2015 7:00 PM

Notes: added tiny bit of leftover honey and 1lb corn sugar @ 20 min
Turned off burner, let sit 10 mins with 0min hops then brought to 95F
added 1/2 gal of sterile water next morning
added slurry of yeast next morning
ferment @ 68F +/- 2F

OG 1.056

Ferment 10 days
Dry hop 7 days
Cold crash 2 days

Author:

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 1.0

Primary Temp: 21 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/18/2014 10:26 PM

Notes:

Author:

5 o'clock Revolucion

Boil Size: 14 Gallons

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/28/2016 6:14 PM

Notes: