Extract Homebrew Beer Recipes | Page 256 | Browse 30,000+ at Brewer's Friend

Author:

Boil Size: 5 Litres

Boil Time: 60

Boil Gravity: 1.073

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/29/2015 11:14 AM

Notes:

Author:

RustyBarrelHomebrewing

Boil Size: 5 Gallons

Boil Time: 3

Boil Gravity: 1.047

Efficiency: 100

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 3/24/2022 2:43 PM

Notes: ===================================
4/24/2022
I kegged this Tuesday 419 from hot with no gelatin. Next day it was pouring with floaters so Wednesday 420 i transferred out of keg and made a make shift filter although not much seemed to get caught I wonder if the floaters were just a few in the first pour. Anyway rekegged it it was 1005 and shook the keg to carb and went on to can. Not sure the carb level but it was on the light side. Also added the rose water extract but have no good idea how much. I did one drop per 16 oz sample so in the end I added 35 drops to a measuring cup but it was immeasurable in the cup and the scale said 0g. So need to figure that out. The cans came out nice tho the rose water could be turned up slightly for experimentation purpose and carb level as well.

===================================
4/14/2022

brew day was a little strange as i brewed this straight up without the fruit then brewed another batch several days later, combining the two then separating them again into separate fermenters, one for plain and the other one for this version with the fruit which i added 7 days ago.

pretty slow fermentation on this and the other one, as of today this is at 1.012 (the other one is higher, about 1.020). i will say it i believe i measured it at 1.015 yesterday so maybe improving

tonight i opened up the fermenter and it does appear to have some active fermentation still going, not sure why this lutra is so slow....obviously it could be because of the fruit but the other fermenter without the fruit is also slow and even slower without the fruit so idk.

anyway i was getting worried about that fruit being at 80 degrees in there so i transferred and filtered the seltzer into a clean fermenter, left a lot of the trub and fruit remains behind, added a couple more spoonfuls of lutra yeast, and two tsp of yeast nutrient which i believe is DAP. oxygenated by pouring back and forth and stirring. ive read seltzer is less susceptible to damage due to oxidation.

on another note it tastes really good. you can tell there is residual sweetness there and its not complex at all, its straight up sugar sweetness. but light and mixed with the fruit flavor its nice. id almost like to stop it like this and package. but in the interest of understanding seltzer i want to try to give it the best chance to ferment all the way out properly then see how that tastes.

i also added a couple drops of rose water extract to 4oz sampler and it tasted really good, a little strong on the nose. im thinking we probably want to start with 1 drop per 16oz can and go from there. not sure how to measure that over the course of the entire batch/keg....

...that would be approx 35-40 drops into the keg not sure if i want to measure it that way or figure something else out. maybe measure 35-40 drops into a measuring cup and see how much that is so next time you can just go from that. andor should measure the 35-40 drops and weight that junk too so next time you can go by weight.

===================================
3/24/2022

initial recipe creation. sounds pretty straightforward, need to figure out how much rose water and extract to add. may want to add rose water at packaging time then do the flavorings at pour time for experimental purposes.

Author:

bincitybandit

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.101

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/14/2016 10:17 PM

Notes:

Author:

jakesnake2384

Boil Size: 4 Gallons

Boil Time: 60

Boil Gravity: 1.071

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/3/2015 1:38 AM

Notes:

Author:

BaardM

Boil Size: 9 Litres

Boil Time: 60

Boil Gravity: 1.053

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/17/2015 10:58 AM

Notes:

Author:

buzzerj

Boil Size: 4.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/2/2013 4:56 PM

Notes: Rated 3rd highest beer in the 2008 Clark County Fair, Clark Co. WA.

Author:

Lunabrew

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: 1.066

Efficiency: 25

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/29/2021 2:08 AM

Notes: Add 5.5 gal water

Add the mash hops and steeping grains at 154°F for 30 minutes. Raise the temperature to 170°F for 15 minutes.

Add DME and boil for 60 minutes, adding hops according to the schedule.

Add dextrose and whirfloc at 10 min

Chill to 66–68°F, aerate well, and pitch the yeast.

Ferment at 68°F for 2–3 weeks, then cold crash, add the dry hops, and after 7 days package, and carbonate

Author:

Kahunakana

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.106

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/11/2016 4:56 AM

Notes:

Author:

dacomfort

Boil Size: 3.5 Gallons

Boil Time: 60

Boil Gravity: 1.084

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: dextrose

Priming Amount: 4.5 oz

Creation Date: 9/13/2019 1:53 PM

Notes: OG 1.056
Was supposed to use London Ale WL013 or Wy1028

Author:

Tollie Mitchell

Boil Size: 1.5 Gallons

Boil Time: 60

Boil Gravity: 1.085

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: Table sugar

Priming Amount: .3

Creation Date: 7/16/2017 12:47 AM

Notes: I want a simple malty, caramely beer without much hop flavor or bitterness.

Author:

Genus Brewing

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.052

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/18/2017 11:53 PM

Notes:

Author:

DaleCarroll@cox.net

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 9/8/2019 12:45 AM

Notes: 2" of ginger is about .5 oz
1 peel of a medium orange is about 1 oz

Author:

Professor Zymie

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.099

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 66 ° F

Priming Method: corn sugar

Priming Amount: 3.5 ounces

Creation Date: 6/14/2017 3:48 PM

Notes: Do not add LME & DME until end of the boil to help keep the color of the beer light and better hop utilization.

When using dry yeast, it is recommended to hydrate properly and aerate well. WLP095 with 2000ml starter.

Author:

Michael Fareri

Boil Size: 1 Gallons

Boil Time: 30

Boil Gravity: 1.043

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/21/2023 1:29 PM

Notes:

Author:

caribbeanbrewing

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.136

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/6/2023 6:06 PM

Notes:

Author:

SemperF1@me.com

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/23/2015 4:20 PM

Notes: steep grains for 20 min or until water reaches 170º

Author:

Robb Von Stein

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.086

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/20/2016 4:03 PM

Notes:

Author:

Olorinpc

Boil Size: 4 Gallons

Boil Time: 60

Boil Gravity: 1.03

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/22/2016 8:13 PM

Notes: 3.15 lbs Munich LME (10min addition)
2 lbs Golden Light DME (10min addition)

Double shot of yeast due to higher OG.

Author:

Tollie Mitchell

Boil Size: 2 Gallons

Boil Time: 60

Boil Gravity: 1.003

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/9/2016 5:43 PM

Notes: • 3# Pilsen LME
• ¼ of extract at beginning (45) and ¼ at 10
• Simcoe hops: .18 oz at 45, .18 at 15 and .4 at 1 minute (recipe called for 5 min)
• ¼ tablet of Whirlflock at 5
• 5.5 oz of C20
• 2 oz of Carapils
• S-05 yeast (about ½ pack)
• Dry hopped remaining .24 oz of Simcoe for 5 days.
We like it. For me, could use a little more aroma hops. I could add a wee bit more @45 as well.
Normally, add late addition at 10 min. That is when the calculator assumes it is added. I did 15 min for this beer.