All-grain Homebrew Beer Recipes | Page 464 | Browse 215,000+ at Brewer's Friend

Author:

zolakoma

Boil Size: 24 Litres

Boil Time: 80

Boil Gravity: N/A

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/4/2013 1:46 PM

Notes:

Author:

Dave's Dreaded

Boil Size: 14 Gallons

Boil Time: 90

Boil Gravity: 1.049

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/21/2013 7:34 PM

Notes:

Author:

wolfie7873

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.034

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/23/2015 3:09 PM

Notes:

Author:

Mig

Boil Size: 37 Litres

Boil Time: 75

Boil Gravity: 1.044

Efficiency: 76

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 18 ° C

Priming Method: Dextrose

Priming Amount: 92g @ 18C

Creation Date: 4/12/2015 10:24 AM

Notes: Honey added 5 days after start of fermentation. Efffeciency may be higher with honey so expected OG will have to be guessed (Honey added later).

29 Litres
Original recipe OG = 1045
FG = 1016
ABV = 3.63%
SRM = 6-7
29Litres
After Honey.est OG = 1056
FG = 1017-19
ABV = 4.8%- 5.5

Returned to RT (22-04-15)-increase FG
Pushing FG to 1015 will give an ABV of 5.29

33L (25-04-15)
2.5L water added OG = 1049
FG = 1014
ABV = 4.65
IBU = 40.54
adding 2.5 L extra of Sterile water (now 33L after racking from hop matter)should bring down FG to 1014 and give ABV of 4.65% (FG 1012 on 3/5/15, ABV now 4.83%)

34.5L (03-05-15)
added 1.5 sterile water .. now 34.5L
OG = 1047
FG = 1012
ABV= 4.62
IBU = 38.78

Author:

DrSherlock

Boil Size: 7 Gallons

Boil Time: 90

Boil Gravity: 1.049

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/1/2015 4:20 PM

Notes: page 43 from "The Homebrewers Guide to Vintage Beer"

Recipe Called for 1.75 lbs of Brown Malt - This can be subbed for Special Roast, Carabrown, or Extra Special Malt would also work.

Recipe also called for .4 lbs of Amber Malt - This can be subbed with Victory or Melanoidi - I went for more roasty and did Munich 10

Recipe didn't call for any black malts - Carafa 3 was added to hit the SRM of 22.

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 70

Mash Thickness: 1.8

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/18/2015 5:04 AM

Notes:

Author:

Drew Beechum

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.027

Efficiency: 70

Mash Thickness: 1.49

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/5/2022 4:37 PM

Notes:

Author:

grosbeak

Boil Size: 6.75 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/11/2012 12:48 AM

Notes: This is basically the NB recipe for St. Paul Porter, but swapping Chinook and Vanguard hops for the kit's Cascade and Cluster. I was going for more of a Troeg's Dead Reckoning and it worked. Brewed 5 gallons, had a dinner party with 3 couples and pretty much finished the whole batch in a night. Needless to say, a good time was had by all. Will brew this every October for December drinking.

Author:

Torben Vedel

Boil Size: 23 Litres

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 75

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: 0.81 bar

Creation Date: 10/5/2021 8:37 PM

Notes: DH1: 11. okt. 2021 17:40

Author:

Cbill

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.07

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: sucrose

Priming Amount: N/A

Creation Date: 9/22/2020 4:07 AM

Notes:

Author:

Det Wulffske Øl

Boil Size: 26.5 Litres

Boil Time: 60

Boil Gravity: 1.062

Efficiency: 70

Mash Thickness: 2.9

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/12/2019 9:48 AM

Notes:

Author:

rolandblais

Boil Size: 1.5 Gallons

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 62 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/14/2018 3:32 AM

Notes: ***GRAIN BILL IS A GUESS***

https://brooklynbrewshop.com/pages/instructions-unicorn-ipa

Pre-Brew: Sanitize
Sanitization is important, but it's nothing scary. When brewing, keep everything clean so that you give what you're brewing its best chance to succeed. So when preparing for brew day, wipe any crumbs off the counters. Move any clutter that might be in your way. Read through the rest of the instructions (at least through fermentation) so that you know what to expect. And have fun!

Dissolve half of your sanitizer packet with a gallon of water in a container. Save the second half for when you bottle.
Soak everything you are going to use, rinse with water, and let air dry on some paper towels. If it isn’t totally dry when you are ready to start don’t worry.
Keep the extra sanitizer in a container for now. Chances are you’ll want to re-sanitize something later.
Additional Ingredients Needed:
3 Tablespoons Honey
Ice
1/3 cup of shredded beets
1: The Mash
During The Mash, you're extracting all the sugars, color and flavor you can from grain. You're basically just steeping grain in hot water. It's a lot like making oatmeal.

Heat 2 quarts (1.9 liters) of water to 160°F (71°C).
Add grain (This is called “mashing in.” Take note of jargon. Or don’t).
Mix gently with spoon or spatula until mash has consistency of oatmeal. Add water if too dry or hot. Temperature will drop to ~150°F (66°C).
Cook for 60 minutes at 144-152°F (63-68°C). Stir every 10 minutes, and use your thermometer to take temperature readings from multiple locations.
You likely don’t need to apply heat constantly. Get it up to temperature, then turn the heat off. Monitor, stir, and adjust accordingly to keep in range.
After 60 minutes, heat to 170°F (77°C) while stirring constantly (“Mashing Out”).
2: The Sparge
If you're familiar with brewing coffee, you should have an idea of how The Sparge works. During The Sparge, you put the grain in a strainer and pour hot water over it to draw out all those sugars you created during The Mash.

Heat additional 4 quarts (3.8 liters) of water to 170°F (77°C). (If possible, start this during The Mash to save time.)
Set up your “lauter tun” (a strainer over a pot).
Carefully add the hot grain mash to the strainer, collecting the liquid that passes through.
This liquid is called “wort” (pronounced “wert”). It will be your beer.
Slowly and evenly pour 170°F (77°C) water over the mash to extract the grain’s sugars.
You want to collect 5 quarts (4.75 liters) of wort. You will lose about 20% to evaporation later on, so you want to start with a bit more than you’ll end with.
Re-circulate wort through grain once.
3: The Boil
The Boil is probably the easiest step to understand because it's as simple as it sounds. During this step, you're bringing your wort to a low, rolling boil and keeping it there for a period of time while adding things like hops or spices. It's a lot like cooking a soup or stock in that you'll add heartier or bittering ingredients toward the beginning and more delicate and aromatic ingredients toward the end.

In a pot, heat wort until it boils. Add 1/4 Amarillo Hops and 1/4 Mosaic Hops when you start to heat the wort.
Keep boiling until you’ve hit the “hot break” (Wort will foam - you may need to reduce heat slightly so it doesn’t boil over.)
Stir occasionally. All you want is a light boil – too hot and you lose fermentable sugars and volume.
The boil will last 60 minutes. Start your timer and add in the rest of the ingredients at these times:
At 55 minutes, add 1/3 cups shredded beet to the boil.
At 60 minutes, turn off heat. Add 1/4 Amarillo Hops and 1/4 Mosaic Hops.
Reserve the remaining hops.
Twenty percent of the wort will have evaporated in this step leaving you with 1 gallon (3.8 liters) of wort. If your boil was a bit high, the surface area of your pot extra large, or you brewed on a really hot day, you may have less than the full amount. Don’t worry – you just reduced your beer a bit too much, but you can add more water in the next step.
4: Fermentation
This is when your beer actually becomes alcoholic. During Fermentation, your jugs should sit somewhere out of the way (and out of direct sunlight) while ale yeast turns sugar into alcohol.

Place brew pot in an ice bath until it cools to 70°F (21°C).
Once cooled, place strainer over funnel and pour your beer into the glass fermenter. Yeast needs oxygen. The strainer helps aerate your wort and clarify your beer (as well as catch any sediment from going into the fermenter). Add tap water to bring wort up to 1 Gallon mark if level is low.
“Pitch” yeast. (Toss the whole packet in.)
Shake aggressively. You’re basically waking up the yeast and getting more air into the wort.
Attach sanitized screw-top stopper to bottle. Slide rubber tubing no more than 1” (2.5 cm) into the stopper and place the other end in small bowl of sanitizer solution. You’ve just made a “blow-off tube”. It allows CO2 to escape.
Let sit for two or three days or until vigorous bubbling subsides. This is when fermentation is highest. You may notice bubbles and foam at the top of the beer. After bubbling calms down, clean tubing and ready your airlock.
Open your fermenter and drop 1/2 remaining Amarillo Hops and 1/2 remaining Mosaic Hops into your beer. This is called dry hopping and will give your beer intense hop flavor.
Sanitize, then re-assemble airlock, filling up to line with sanitizer.
Insert airlock into hole in stopper.
1 week later drop remaining hops to your fermenter as a second dry hop
Keep in a dark place at room temperature for two weeks after you added the yeast without disturbing other than to show off to friends. (If beer is still bubbling, leave sitting until it stops.)
In the meantime, drink beer with self-closing swing tops, or ask for empties at a bar that has some. If you have a bottle capper and caps, you can save two six packs of non-twistoff beers instead.
5: Bottling (2 Weeks Later)
Once your beer's in bottles, it carbonates naturally with the help of just a little extra sugar. It wakes up your ale yeast (that went dormant during fermentation) to create just enough bubbles for some nice fizz.

Thoroughly rinse bottles with water, removing any sediment.
Mix remaining sanitizer with water.
Fill each bottle with a little sanitizer and shake. Empty after two minutes, rinse with cold water and dry upside down.
Dissolve 3 tablespoons honey with 1/2 cup water. Pour into a sanitized pot. You will be siphoning your beer into the same pot in the next steps.
Carbonation comes from adding sugar when bottling, so if you filled your jug with less than the full gallon in the last step, use less honey when bottling. Using the full amount can result in your beer being over-carbonated.
Siphoning (It all happens pretty fast. You may want to practice on a pot of water a few times.) To see it in action first, watch the How to Bottle video at brooklynbrewshop.com/instructions.
A. Attach open tubing clamp to tubing.
B. Fill tubing with sanitizer.
C. Attach sanitized tubing to the short curved end of your sanitized racking cane. Attach the black tip to the other end - it will help prevent sediment from getting sucked up. It will probably be a snug fit, but you can get it on there.
D. Pinch tubing clamp closed.
E. Remove screw-cap stopper and place racking cane into jug, just above the sediment at the bottom (“trub”).
F. Lower end of tubing not connected to racking cane into sink. Suction will force beer up and through the racking cane and tubing. Open tubing clamp, let sanitizer flow into sink until beer just starts to flow out of the tubing, then clamp shut. Open clamp on tubing, allowing beer to flow into pot with sugar solution. Tilt jug when beer level is getting low, but be careful in not sucking up the trub.
Siphon beer from pot into bottles, pinching tube clamp to stop ow after each bottle.
Close bottles.
Store in a dark place for 2 weeks.
6: Enjoy (Two Weeks Later)
You did it! You made beer.

Put beers in the fridge the night before you drink them.
Pour your beer in a glass and add sprinkles on top of the fluffy head for a fun Unicorn look and flavor.
Drink. Share with friends if you’re the sharing type.

Author:

Boil Size: 7 Gallons

Boil Time: 30

Boil Gravity: 1.074

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/5/2016 2:18 AM

Notes:

Author:

sjeffrey

Boil Size: 3.41 Gallons

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 55

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/27/2016 4:48 PM

Notes:

Author:

KetilP

Boil Size: 28.5 Litres

Boil Time: 70

Boil Gravity: 1.045

Efficiency: 80

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 15 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/7/2016 9:57 PM

Notes:

Author:

SirMoo

Boil Size: 11 Gallons

Boil Time: 60

Boil Gravity: 1.107

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/21/2015 3:22 PM

Notes: Unlike many recipes that seem to be a collection of leftover malts and remainder hops this Barleywine is very specific in its ingredient list, exact weights and method. It is not a difficult recipe but it is time consuming to do properly. First, we're after an OG of 1.104 and an ABV of 11.03%. Here we go! Bring 6.5 gallons of water just to a boil and dissolve in 1 Tbsp of Five Star 5.2 Ph stabilizer. Preheat your mash tun with 1 gallon of boiling water and drain it after 10 minutes. Always add grain to water, not the reverse. Calculate the grain temp and volume for a mash conversion at 148F. The strike temp will likely be in the range of 160F-168F, (but you must calculate this exactly). Convert for 60 minutes at 148F. Now calculate a second step infusion temp for at 152F by adding 1.75 gallons for 30 minutes. Drain 6.0 - 6.25 gallons of wort. Your OG at this stage will be about 1.080 - 1.085. Remove 2 gallons to a smaller stainless pot and gently boil-off 33% of the volume leaving 1.33 gallons. This will caramelize the wort as wll as increase the OG. Pour the 1.33 gallons of caramelized wort back into the main boil. This will be a 60 minute boil. Bring main wort pot to a boil. After first heat break add 2 oz fresh Nugget hops to a hops bag and boil for 60 minutes. At the last 20 minutes of the boil add Irish Moss. At the last 7 minutes add the Cascade hops, (in a hops bag). At boils end remove hops and squeeze wort as much as possible with a sterile spoon/spatula. You should have approximately 4.25 gallons of high gravity wort, (very close to 1.104). Cool wort quickly down to 65F-70F via coil or chill plate. Oxygenate wort well for 60-90 seconds using an oxygen kit and wand. Now comes a very important part unlike many fermentation methods. Do not pitch yeast. You will pitch the 4.25 gallons onto a yeast cake of US-05 of a previous fermentation or prepared culture not more than 7 days old. US-05 will complement the Barleywine's character and final gravity. After 5 days oxygenate again and make a prepared cream of one packet (11 grams), of Nottingham yeast and pitch again. Let ferment in primary for 9 additional days then decant to glass or stainless for secondary fermentation for 6 weeks. Priming to bottles required additional considerations. First, bottling will require less priming sugar. Use about half what you normally use, (22g DME/gal or 12g Dextrose/gal). Also, when preparing the priming sugar, cool to 75F and add 15-20 grams, (2-3 Tbsp), of live krausening yeast from your fermentation bucket. Slurry well the priming solution then decant from your secondary onto this slurry in the bottling bucket. Fill bottle to 1" inch from the top on long-necks and cap with oxygen absorbing caps. This Barleywine is best after 12 months of bottled fermentation. It is creamy with a very subtle fruit finish and a rich, satisfying mouth-feel. The hops are perfectly balanced with the first run barley richness. I brew this twice yearly with great anticipation each time. It will yield only 4 cases so brew often and let me know if you have found a way to improve it.

Based on recipe: http://beerrecipes.org/showrecipe.php?recipeid=1206#sthash.9vpZJhmf.nVk855bj.dpuf

Author:

enrique

Boil Size: 1.5 Gallons

Boil Time: 90

Boil Gravity: 1.032

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/4/2015 11:25 PM

Notes:

Author:

Nosybear

Boil Size: 7 Gallons

Boil Time: 90

Boil Gravity: 1.068

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/12/2015 1:40 AM

Notes: Start fermentation in the low 60's, let rise to upper 60's as fermentation progresses

Target is 32 IBU, no hop character or flavor.

Author:

7 Slot Brewing

Boil Size: 6.25 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 74

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 64 ° F

Priming Method: Corn Sugar

Priming Amount: 4 OZ

Creation Date: 11/20/2013 4:51 AM

Notes: MASH INFO: Single infusion/Batch Sparge/Full Body Mash in with 14.38 quarts of water at 174. Should equalize to 156 degrees. Mash at 156 for 60 minutes. Batch Sparge twice with 2.5 gallons of water at 175 degrees. Boil for 60 minutes using the hop schedule listed in the ingredients section. Add Nibs to primary after fermentation has ended, do not rack beer to a secondary. Just add the nibs to the primary fermentor. 2-3 days before adding them, soak the nibs in just enough Vodka to cover the nibs. Then dump them in, vodka and all, let sit on the nibs for 7-10 days max, 3 to 4 days seems about right.
ADD LACTOSE WITH 10 min LEFT IN BOIL show less

Author:

Happenstance Brewing Company

Boil Size: 7.75 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 72 ° F

Priming Method: Corn Sugar

Priming Amount: 3.0 oz for 21 days

Creation Date: 3/5/2013 3:20 PM

Notes: Mash at 150F
Kill the flame, add the 0 min hops, then let sit for 60 minutes.
Drop the temp Pitch and Ferment at 70F until krausen drops, then raise to 72F for the remainder. Aerate before pitching and again at first signs of fermentation.
Cold Crash to 36F for 2 days after 21 days in primary. Rack to secondary and raise temp to 72F, then add dry hop. Bottle with rehydrated Safale 04.