All-grain Homebrew Beer Recipes | Page 472 | Browse 225,000+ at Brewer's Friend

Author:

brewdaddy

Boil Size: 11 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 71 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/9/2013 10:53 PM

Notes:

Author:

Krimbos

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 50

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/8/2013 2:12 PM

Notes: Heat 12 qts water to 170F in brew pot. Transfer to small igloo cooler equipped with flexible colander. Pour grains slowly into warmed water, tie off bag. Strike Temp 156

After 1 hr, add 2 gal boiling water to grains, open spigot and recirculate with gallon pitcher, maintaining fluid volume above grain bed. Recircultae until clear.

Drain into brew pot. Maintain fluid level by adding addition hot water during drain.

Stop at 6 gal. Take gravity reading

Bring to boil and follow hop schedule as indicated. Add extract at 30 min

Author:

Boil Size: 8 Gallons

Boil Time: 60

Boil Gravity: 1.038

Efficiency: 84

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 48 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/21/2023 11:45 PM

Notes:

Author:

Wolf Pack Brewing

Boil Size: 38.08 Litres

Boil Time: 90

Boil Gravity: 1.064

Efficiency: 75

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 20 ° C

Priming Method: co2

Priming Amount: 1.64 bar

Creation Date: 12/1/2020 4:12 AM

Notes: https://shop.theelectricbrewery.com/pages/kern-river-citra-double-ipa

http://www.thebrewingnetwork.com/post1668/

In this episode of Can You Brew It, Jamil and Tasty attempt to clone Citra Double IPA from Kern River Brewing Company in Kernville, CA. This wonderful craft beer took gold at the Great American Beer Festival in 2011 and has racked up many other awards as one of the best double IPA’s on earth. Tune in and find out if Tasty was able to homebrew this hop monster of a beer.

Needs a 2L Starter using 200g of DME

https://shop.theelectricbrewery.com/pages/kern-river-citra-double-ipa

add 500mg potassium metabisulphite to 20 gallons water to remove chlorine / chloramine (if required).
Water treated with brewing salts to our Hoppy flavour profile: Ca=110, Mg=18, Na=16, Cl=50, SO4=275 (Basically Randy Mosher's ideal Pale Ale numbers with slightly less Sulphate). For complete details on how to adjust your water, refer to our step by step Water Adjustment guide.
1.25 qt/lb mash thickness.
Single infusion mash at 148F for 120 mins.
Raise to 168F mashout temperature and hold for 10 mins.
~90 min fly sparge with ~5.6-5.8 pH water (measured at mash temperature). Collect 13.9 gallons.
Milwaukee MW102 pH meter
MORE INFOBoil for 60 minutes, adding Whirlfloc and hops per schedule.
After boil steep / whirlpool for 20 minutes with the lid on. (No need to stir, steeping is fine. Hop oil extraction is a function of contact time and temperature, not motion).
With the lid still on, cool the wort quickly to 67F (we use a one-pass convoluted counterflow chiller to quickly lock in hop flavour and aroma) and transfer to fermenter.
Aerate well. Pure oxygen from a tank may be used at a rate of 1 litre per minute for 120 seconds per 5 gallons.
Pitch yeast and ferment at 67F (wort temperature). We use modified stainless fermenting buckets in wine fridges.
Due to the high hopping rates and quadruple dry hopping the beer is very susceptible to oxidation. You have to be very careful to minimize all exposure to oxygen in order to preserve the hop flavours and aromas. Even hops themselves can have oxygen caught in their anatomy. Some hints:
If a vessel needs to be opened, purge the headspace with CO2 before closing.
Before adding hops to beer, place them in a tall container and flush with CO2.
Flush target vessels with CO2 before transferring beer. If hops are to be added at the same time (i.e. dry hop #2), add them to the vessel first.
Don't be stingy with CO2! CO2 is cheap. To flush vessels, growlers, kegs we have a separate bare gas line off one of our manifolds with its own shutoff.
Add dry hops #1 once fermentation is nearing completion (i.e. 5 points from terminal gravity) and raise the temperature to 70-72F. We simply turn off the fermenting fridges and allow the beer to naturally rise to room temperature. Steep dry hops #1 for 3 days while fermentation finishes. Assume fermentation is done if the gravity does not change over ~3 days.
Add dry hops #2 to brite tank (we use 5 gallon glass carboys), purge with CO2 to avoid oxygen pickup, then carefully rack in the beer on top of the hops. Allow to steep for 3 days at 70-72F room temperature, gently swirling a few times a day. We do not recommend using hop sacks or other containers as you'll get the best flavour extraction from the hops if you let them roam free. For beers such as this that require multiple dry hop additions, some will dry hop in kegs using stainless steel dry hoppers, tying a piece of unflavoured / unwaxed dental floss to the lid to make it easy to remove (the floss is thin and doesn't impede the seal between the keg and keg lid). We don't recommend this approach as we find that the hops tend to clump together which in turn reduces oil extraction, requiring far too many hops to be used (and more beer lost to absorption).
After 3 days in the brite tank add dry hops #3. Leave previous hops in. Swirl gently a few times a day.
After 6 days in the brite tank add dry hops #4. Leave previous hops in. Swirl gently a few times a day.
After 9 days in the brite tank package as you would normally. We rack to kegs that have first been purged with CO2, and then carbonate on the low side (around 2 volumes of CO2) to minimize carbonic bite and let the hop and malt flavours shine through. We chill the kegs to near freezing while carbonating at the same time in a 6-keg conditioning fridge. After ~1-2 weeks at serving pressure the kegs will be carbonated and ready to serve. Like all hop forward beers this Double IPA is best consumed fresh so feel free to raise the CO2 pressure temporarily to 30-40 PSI to carbonate fast over a 24 period, and then turn back down to serving pressure. Some hop bits will have invariably made their way into the keg during transfer so we use a Hop Stopper Keg Edition filter to ensure that hops do not clog the dip tube and/or end up in the glass. Force carbonating at high pressure and using a Hop Stopper filter allows us to serve this beer 24 hours after kegging. There's no need to wait a few days for any hop bits that made their way into the keg to first settle out.
We do not recommend using finings such as unflavoured gelatin as it may "round off" hop flavours / aromas.

Author:

Urban Brewing 10301

Boil Size: 7 Gallons

Boil Time: 70

Boil Gravity: 1.037

Efficiency: 35

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 50 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/8/2017 4:15 AM

Notes: 03/10/17 - OG 1.066
4/09/17 - FG 1.012
7.09 % ABV

Author:

Bakke Brygg

Boil Size: 24 Litres

Boil Time: 90

Boil Gravity: 1.05

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 18 ° C

Priming Method: Sukkerlake

Priming Amount: 6 g sukker/L

Creation Date: 12/10/2015 11:47 AM

Notes: Mengden meske- og skyllevann du bør bruke kommer an på utstyret og metoden du brygger med. Som et anslag kan vi si at du kan bruke 16 l meskevann og 11,85 l skyllevann til dette ølet. Noen bryggemaskiner (f.eks. Speidel Braumeister) kan kreve større mengder meskevann. Sjekk alltid manualen på utstyret du bruker.

Mesking på 67 grader i 60 min. Utmesk på 77 grader i 5 min hvis du har mulighet til å øke temperatur i mesken.

Kjøl ned til 17 grader før pitching av gjær.

Gjæring på 18 grader til stormgjæring begynner å avta (typisk etter 3-5 dager). Øk deretter til 20 grader og hold resten av gjæringsperioden (totalt 14 dager).

Gjæralternativer: WLP001, WLP002, WLP007, WLP013, WLP051

Author:

TheLadybugTree

Boil Size: 6.75 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 60 ° F

Priming Method: Force Carbonate

Priming Amount: 10 PSI @ 38F

Creation Date: 2/17/2015 2:36 PM

Notes: 2 packets of rehydrated s-04

Author:

JackPGH

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.067

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/13/2015 11:48 PM

Notes:

Author:

Josh (Brewer's Friend)

Boil Size: 4 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 50

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/22/2011 4:21 AM

Notes: Brew
- Mash w/ 4 gal, strike at 166, w/ 1tsp Epsom Salt & 1tsp Calcium Chloride
- collect 2.5 gal
- batch sparge w/ 2gal at 201F to bring mash to 170F
- collect 2 gal for 4.5 gal total
- boil 60 mins to 3.5 gal
- add orange peel 15 min before flame out
- add crushed coriander 5 min before flame out
- add 1.5 gal for 5 gal total

Notes:
- efficiency way lower than expected at 50% (most likely due to oats and wheat absorbing too much)
- only collected 2 gal on first running and 1.75 gal on batch sparge, so added .75 gal up to 4.5 gal before boil
- down to 4 gal before starting boil, yielding 3.25 gallons
- added to 1.5 gallons in primary for 4.75 gallons total

Author:

Custom Brewery

Boil Size: 40 Litres

Boil Time: 60

Boil Gravity: 1.063

Efficiency: 75

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 22 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/4/2015 6:17 PM

Notes:

Author:

Boil Size: 28.5 Litres

Boil Time: 90

Boil Gravity: 1.063

Efficiency: 85

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/29/2015 3:38 PM

Notes:

Author:

Boil Size: 75 Litres

Boil Time: 60

Boil Gravity: 1.058

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 22 ° C

Priming Method: Açúcar Invertido

Priming Amount: 102

Creation Date: 11/29/2015 8:48 PM

Notes:

Author:

TimMillerHsv

Boil Size: 5.8 Gallons

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 78

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/19/2016 2:35 PM

Notes: Use 1 L starter (3.5 oz DME) for 5 gal batch.

Author:

Rhetorik

Boil Size: 14 Gallons

Boil Time: 60

Boil Gravity: 1.083

Efficiency: 75

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/29/2016 7:47 PM

Notes:

Author:

Tom Davis

Boil Size: 27 Litres

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 75

Mash Thickness: 4.424

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/19/2016 6:22 AM

Notes:

Author:

Sensing Brewing

Boil Size: 28 Litres

Boil Time: 60

Boil Gravity: 1.037

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 32 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/20/2018 9:44 AM

Notes: Blend of kveik.
FY5
FY9
FY10

Author:

Kjeller 5

Boil Size: 20 Litres

Boil Time: N/A

Boil Gravity: 1.088

Efficiency: 80

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/1/2018 2:24 PM

Notes: Denne skal ikke kokes under noen omstendigheter. For å hente ut mest mulig honning, kan du varme den opp i et vannbad, men temperaturen bør ikke overstige 40 C. Dersom du koker honningen, mister du nesten all aromaen i den.

Gjæringen i en mjød bruker vesentlig lengre tid enn en øl, ofte over en måned før den har gjæret ut. Mjød bør i tillegg lagres minst én måned per to alkoholprosent etter flasking.

Dersom du ønsker variasjon, kan du etter endt gjæring stikke mjøden over i et annet gjæringskar, og tilsette diverse smakstilsetninger. Forslag: Ancho Chili, Chipotle Chili, blåbær, multebær, vanilje, kanelstang, nellik, muskatnøtt, koriander, kardemomme, tørket appelsinskall, humle.

Author:

Head First

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.074

Efficiency: 57

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 68 ° F

Priming Method: co2

Priming Amount: 5.99 psi

Creation Date: 12/30/2018 4:17 PM

Notes: This is an attempt at Sierra Nevada Narwhal. I'll bottle it and drink some fresh and oak/bourbon some for aging.

From the Sierra Nevada Web Site:

Alcohol Content 10.2% by volume
Beginning gravity 24.2° plato (1.102)
Ending Gravity 6.6° plato (1.026)
Bitterness Units 60

Author:

mikeymikela

Boil Size: 8 Gallons

Boil Time: 60

Boil Gravity: 1.073

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 75 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/16/2014 6:04 PM

Notes:

Author:

monkeyhaiku

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/6/2016 9:21 PM

Notes: