Extract Homebrew Beer Recipes | Page 218 | Browse 30,000+ at Brewer's Friend

Author:

WD88

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.073

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/22/2015 12:52 AM

Notes:

Author:

Coadinghaylor Creations

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.134

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/28/2021 2:34 PM

Notes:

Author:

Glenside Brewer

Boil Size: 3.5 Gallons

Boil Time: 60

Boil Gravity: 1.091

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/23/2015 3:30 PM

Notes: Brew Day - Wednesday 9-23-15

3.5 gallon boil, top off to 5 gallons; oak chips soaked in vodka go in after fermentation, dry hop magnum and cascade for 7 days.

Author:

Genus Brewing

Boil Size: 7.17 Gallons

Boil Time: 60

Boil Gravity: 1.023

Efficiency: 50

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/22/2020 6:36 PM

Notes:

Author:

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.107

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 50 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/16/2017 4:53 PM

Notes: Did not want an overly hoppy flavor. So stayed with the Saaz and minimized last addition to add a little hoppiness but not enough to make the wife wince. Added the last fuggle hops at 5 minutes to final cook time.

Author:

Boil Size: 6.52 Gallons

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/19/2023 3:12 PM

Notes:

Author:

SuperBrew

Boil Size: 3.5 Gallons

Boil Time: 60

Boil Gravity: 1.086

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/31/2020 2:04 AM

Notes:

Author:

Boil Size: 4 Gallons

Boil Time: 60

Boil Gravity: 1.075

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: Dextrose

Priming Amount: 5 oz

Creation Date: 12/15/2018 3:37 AM

Notes:

Author:

RobertE

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.112

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 67 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/19/2017 7:47 PM

Notes:

Author:

McBride Brewing

Boil Size: 3 Gallons

Boil Time: 75

Boil Gravity: 1.077

Efficiency: N/A

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/3/2015 11:20 PM

Notes:

Author:

japa2121

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.106

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/21/2016 12:32 AM

Notes:

Author:

gurt

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.079

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 74 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/8/2016 2:22 AM

Notes:

Author:

okiemurse

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: priming sugar

Priming Amount: 5 oz

Creation Date: 5/12/2016 6:08 PM

Notes: Official NORTHERN BREWER Instructional Document
The perfect pint after a hard day’s work, Gaarden Hoe is
an ode to the historic and refreshing Belgian wit. Classic
wheat is expertly tilled into a traditional pilsner malt bill
and modest, grounded hop profile. Coriander and bitter
orange peel offer slightly tart and citrusy undertones to
quench even the most parched palate.
O.G: 1.049 READY: 6 WEEKS
1–2 weeks primary, 2 weeks secondary,
1–2 weeks bottle conditioning
KIT INVENTORY:
MAILLARD MALTSTM
EXTRACTS & OTHER FERMENTABLES
- 4 lbs Wheat DME (60 min addition)
- 2 lbs Pilsen DME (15 min late addition)
HOPTIMUS REXTM
PREMIUM HOPS
& OTHER FLAVORINGS
- 1 oz Saaz (60 min)
- 1 oz Saaz (15 min)
- 1 oz Bitter Orange Peel (5 min)
- 1 oz Coriander (5 min)
** 6-8# frozen strawberries (secondary)
** strawberry extract (secondary, to taste)
YEAST
- DRY YEAST (DEFAULT): Fermentis Safbrew T-58. Optimum
temp: 59 - 75F.
- LIQUID YEAST OPTION (RECOMMENDED): Wyeast
3944 Belgian Wit. Optimum temp: 62-75F. White Labs WLP400
Belgian Wit Ale. Optimum temp: 67-74F
PRIMING SUGAR
- 5 oz Priming Sugar (save for Bottling Day)
These simple instructions are basic brewing procedures
for this Northern Brewer extract beer kit; please refer
to your starter kit instructions for specific instructions
on use of equipment and common procedures such as
siphoning, sanitizing, bottling, etc.
For more detailed extract brewing instructions, please
visit www.northernbrewer.com
BEFORE YOU BEGIN ...
MINIMUM REQUIREMENTS
- Homebrewing starter kit for brewing 5 gallon batches
- Boiling kettle of at least 3.5 gallons capacity
- A 5 gallon glass carboy, with bung and airlock, to use as a
secondary fermenter
- Approximately two cases of either 12 oz or 22 oz pry-off
style beer bottles
UNPACK THE KIT
- Refrigerate the yeast upon arrival
- Locate the Kit Inventory (above) – this is the recipe for your
beer, so keep it handy
- Doublecheck the box contents vs. the Kit Inventory
- Contact us immediately if you have any
questions or concerns!
PROCEDURE
A FEW DAYS BEFORE BREWING DAY
1. Remove the liquid Wyeast pack from the refrigerator,
and “smack” as shown on the back of the yeast package.
Leave it in a warm place (70–80° F) to incubate until the
pack begins to inflate. Allow at least 3 hours for inflation;
some packs may take up to several days to show inflation.
Do not brew with inactive yeast — we can replace the
yeast, but not a batch that fails to ferment properly. If
you are using dry yeast, no action is needed.
ON BREWING DAY
2. Collect and heat 2.5 gallons of water.
3. Bring to a boil and add 4 lbs Wheat DME. Remove the
kettle from the burner and stir in the Wheat DME.
4. Return wort to boil. The mixture is now called “wort”,
the brewer’s term for unfermented beer.
- Add 1 oz Saaz hops, and boil for 60 minutes.
- Add 2 lbs Pilsen DME and 1 oz Saaz 15 minutes before the
end of the boil.
- Add 1 oz Coriander and 1 oz Bitter Orange Peel 5 minutes
before the end of the boil. You may crush the seeds before
adding if you wish.
5. Cool the wort. When the 60-minute boil is finished,
cool the wort to approximately 100° F as rapidly as
possible. Use a wort chiller, or put the kettle in an ice
bath in your sink.
6. Sanitize fermenting equipment and yeast pack. While
the wort cools, sanitize the fermenting equipment –
fermenter, lid or stopper, fermentation lock, funnel, etc –
along with the yeast pack and a pair of scissors.
7. Fill primary fermenter with 2 gallons of cold water,
then pour in the cooled wort. Leave any thick sludge in
the bottom of the kettle.
8. Add more cold water as needed to bring the
volume to 5 gallons.
9. Aerate the wort. Seal the fermenter and rock back
and forth to splash for a few minutes, or use an aeration
system and diffusion stone.
10. OPTIONAL: if you have our Mad Brewer Upgrade or
Gravity Testing kits, measure specific gravity of the wort
with a hydrometer and record.
11. Add yeast once the temperature of the wort is 78°F or
lower (not warm to the touch). Use the sanitized scissors
to cut off a corner of the yeast pack, and carefully pour
the yeast into the primary fermenter.
12. Seal the fermenter. Add approximately 1 tablespoon of
water to the sanitized fermentation lock. Insert the lock
into rubber stopper or lid, and seal the fermenter.
13. Move the fermenter to a warm, dark, quiet spot until
fermentation begins.
GAARDEN HOE
BEYOND BREWING DAY, WEEKS 1–2
14. Active fermentation begins. Within approximately
48 hours of Brewing Day, active fermentation will
begin – there will be a cap of foam on the surface of
the beer, and you may see bubbles come through the
fermentation lock.
15. Active fermentation ends. Approximately 1–2 weeks
after brewing day, active fermentation will end: the cap
of foam falls back into the new beer, bubbling in the
fermentation lock slows down or stops.
16. Transfer beer to secondary fermenter. Sanitize
siphoning equipment and an airlock and carboy bung or
stopper. Siphon the beer from the primary fermenter into
the secondary.
BEYOND BREWING DAY—
SECONDARY FERMENTATION
17. Secondary fermentation. Allow the beer to condition in
the secondary fermenter for 2 weeks before proceeding
with the next step. Timing now is somewhat flexible.
BOTTLING DAY—ABOUT 4 WEEKS
AFTER BREWING DAY
18. Sanitize siphoning and bottling equipment.
19. Mix a priming solution (a measured amount of sugar
dissolved in water to carbonate the bottled beer) of 2/3
cup priming sugar in 16 oz water. Bring the solution to a
boil and pour into the bottling bucket.
20. Siphon beer into bottling bucket and mix with priming
solution. Stir gently to mix—don’t splash.
21. Fill and cap bottles.
1–2 WEEKS AFTER BOTTLING DAY
22. Condition bottles at room temperature for 1–2 weeks.
After this point, the bottles can be stored cool or cold.
23. Serving. Pour into a clean glass, being careful to leave
the layer of sediment at the bottom of the bottle. Cheers!

Author:

Uhtred Bebbanburg

Boil Size: 1.5 Gallons

Boil Time: 60

Boil Gravity: 1.147

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 67 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/20/2015 11:11 PM

Notes:

Author:

Vheissu

Boil Size: 11 Litres

Boil Time: 60

Boil Gravity: 1.112

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/9/2017 1:36 PM

Notes: A single hop Galaxy pale ale. Delicious.

Author:

letdarri

Boil Size: 13 Litres

Boil Time: 60

Boil Gravity: 1.113

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/4/2017 8:48 AM

Notes: Lievito 2 bustine

Author:

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.103

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/12/2016 11:14 PM

Notes:

Author:

BrewingNoob

Boil Size: 1.5 Gallons

Boil Time: 60

Boil Gravity: 1.055

Efficiency: 25

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/27/2018 6:46 PM

Notes: My first recipe. Started as a simple chocolate stout kit that I altered and tweaked to increase gravity (abv%) and lean the flavors towards Mexican mocha stout.

Bottled and tasted, didn't pick up on cinnamon, nutmeg, and coffee flavors much. Maybe increase amounts next batch.

Author:

Pilsen

Boil Size: 9 Gallons

Boil Time: 90

Boil Gravity: 1.057

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: dme

Priming Amount: 10.3 oz

Creation Date: 12/3/2021 12:08 AM

Notes: Bavarian Hopfenbombe Pils #9

Lager - bottom fermented

Yield: 7.75 gallons

Target Fermentation temp: 48-49 F.

Ingredients:

9.0 gal filtered water
11 Lbs. Pilsen Light malt powder (Briess)
7 oz. fresh Saaz hops (boiling)
2 oz. fresh Hallertau hops (finish)
2 oz. Tettnanger Hop Pellets(finish)
2 packs Saflager 34/7 - made yeast starter in warm water

Boiled about 9.0 gallons of water total
Added 11 lbs Pilsen light powdered malt total, stirred well, and boiled for about 5-10 minutes,
before starting hop addition.
HOPS WERE PUT LOOSE INTO THE WORT, and hand-filtered out with a metal mesh strainer.

Hop Schedule:

3 oz fresh Saaz hops @ start of boil
2 oz fresh Saaz hops after 30 min
2 oz fresh Saaz hops after 60 min
2 oz fresh Hallertau after 75 min
2 oz Tettnanger pellets @ end of boil

Turned off heat, let wort cool for about 2 hours - removed hops by filtering.
After cooling, screen-filtered repeatedly until wort was as clean as possible.

2 packs of Saflager 34/7 were pitched into glass measuring cup
and a yeast starter created. Cultured about 12 hours, using 1/2 cup of filtered warm water, and 1 Tsp malt powder added after about 30 minutes. Stirred well.

Moved wort into the bathtub at 60 F. water, for faster cooling.
Waited about 12 hours for wort to cool, then pitched yeast starter, and stirred.

Removed half of the wort into another 8 gallon fermenter, for easy transport to beer fridge.
Then poured balance of wort into 8 gallon container from spare container.

Temp at time of pitching yeast - <>~ 60 F.

Temp was kept at 48-50 F in beer fridge.

After 24 hours, yeast became very active and started to foam.
Head was infiltrating into the air lock with active foam and had to be cleaned about every 8 hours
for the first 2 days.

At around the 3rd or 4th day, the head had started to fall.

By day 6: Fermentation quite active, a bubble once every 12-13 seconds (Fermentation Temp 49 F. (average))

Fementation died down after about 2 weeks. Air lock would occasionally drop and then I would add a little extra water and piston would rise again under pressure after a few hours.

Bottled on day 23.
Used 10.3 ounces light DME to carbonate about 7.75 gallons at 68 F. (2.55 Atmospheres)

After 15 days of bottle fermentation, all bottles were moved to the cooler, and temp lowered to 32 F.

Author:

BohicaSD

Boil Size: 2.5 Gallons

Boil Time: 70

Boil Gravity: 1.052

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/2/2015 3:58 AM

Notes: Measured OG 1.044. Yeast hydrated 45 minutes. Aerated with air stone 5 minutes. Fermenting in Fastferment. Spicy and bitter going into the fermenter.