All-grain Homebrew Beer Recipes | Page 699 | Browse 220,000+ at Brewer's Friend

Author:

Reichert

Boil Size: 6.93 Gallons

Boil Time: 90

Boil Gravity: 1.031

Efficiency: 55

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 50 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/16/2015 1:46 PM

Notes: - Pitch at 49 deg.
- Ferment to 90% atten. (2 weeks)
- Rack, reduce temp to 32 deg. (2 weeks)
- Rack, raise temp to 68 deg. (3 days)
- Reduce to 32 deg. (2-6 weeks)

Reference: https://byo.com/hops/item/1183-northern-german-pils-style-profile

Author:

Doderlein Bacillus

Boil Size: 25 Litres

Boil Time: 90

Boil Gravity: 1.043

Efficiency: 80

Mash Thickness: 4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.75

Primary Temp: 13 ° C

Priming Method: Corn Sugar

Priming Amount: 120.2 g

Creation Date: 11/22/2015 11:07 AM

Notes: CO2 in Beer:
1.16 volumes
Priming Sugar Options:
Table Sugar: 109.4 g
Corn Sugar: 120.2 g
DME: 160.8 g

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 70

Mash Thickness: 1.4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 63 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/13/2016 10:33 PM

Notes:

Author:

RustyBarrelHomebrewing

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 10/23/2021 12:01 PM

Notes: ==================================
11/17/2021
updating recipe FG was 1.010 for 7.2%. it does NOT taste that strong. still really thin bodied. still idaho 7 bitterness but not as bad as previous batch, it may be fading. it needs more flavors - more malt backbone (crystal malt andor carapils. if you want to keep it yellow. you could take it another direction see red ipa notes below). it also needs more hops, i subbed several ounces of cascade to dry hop for what was idaho 7 last time and we did get reduction of the piney bitterness but it still doesnt have enough hoppy presence to be delicious. its just thin watery slightly bitter slightly hoppy beer with no backbone. i may start throwing random hops into a dry hop bag in the keg to see what happens.

red ipa discussion.
although we are saying the potato is not really imparting any flavor, at the same time you could maybe get some earthiness from it, the idaho 7 definitely has some earthiness and pine....you could take this the earthy route and add some roasted grains to more of a red ipa like a rye. maybe add rye too and spicy earthy hops. NB rye ipa uses pallisade. simcoe, amarillo centennial, anything for old school ipa would work.)
==================================
10/23/2021
updating receipe for attempt 2. first batch was really dry and too bitter to drink. i was surprised that i didnt get much aroma or hop flavor from the idaho7 dry hop. I think i will stick with same grain bill and expect the dryness, but will significantly reduce the IBUs from 80 to minimum of 40 for the style. reducing warrior and 30 min idaho7 addition. Also substituting some of the idaho dry hop with cascade to give it a little more hop aroma and flavor. bumping up efficiency to 70% will be brewing it on G40.

i think last time i ran this on tap. should consider doing water adjustments andor building from RO....

===================================
9/13/2021
reducing potatoes from 15 to 10lb just because its a lot of friggin potatoes. the pH from existing recipe was really too low, not sure how accurate, so I axed that and reset for henrico water, now way too high, so im adding 8tbsp phosphoric acid to bring it to 5.5. Not sure how accurate my henrico profile is at this point, about a year old. and at the moment I dont have a pH meter to check it.

===================================
4/5/2021
Reworking the potato ipa idea. Originally had it as more of a neipa based off of conan. Here we change it to more of a traditional west coast ipa. i think the potato will dry it out and idaho 7 sounds like more of a west coast ipa hop.

for the potatoes :
will skin chop and boil 15 lbs then mash/whip them into mashed potatoes, then add to the (beer) mash. research tells me its 7.6 points per pound per gallon which i have input above. double checked this number - 5 lbs should give as many points as 1 pound of 2row)

idaho 7 write up : https://bsgcraftbrewing.com/idaho-7
brewing with potatoes : https://byo.com/article/brewing-with-potatoes-techniques/

===================================
SNAPSHOT FROM BSG SEQUOIA 4/5/2021
===================================
4/2/2021
updating recipe from actual measurements. low on gravity but i think i pulled too much wort and ended up with nearly 6 gallons. mash was strangely in the 5.3 range. ended up adding another 4 oz hops dry hop to the keg.
===================================
3/25/2021
night before brew night
....and im realizing i did not pick up distilled water...doh. looking for an alternate water profile that i can build off of my tap water - and that is assuming the water profile i have for henrico county (from ward labs test sept 2020) is correct! eek.

made a new water profile based on a green flash clone recipe from theelectricbrewery site which they say is basically taken from a randy mosher pale ale water profile. lets see if it works.

===================================
3/17/2021
starting to worry a little about my last IPA, coming from the can its tasting really one dimensional, not bitter enough, too thin, and maybe im paranoid but i detect a slight sour note - wondering if it could be from the acid malt, not being covered up because of the really fermentable grain bill.

for this one i will use phosphoric acid and some crystal malt. adjusting the water chemistry accordingly. considered bumping the warrior too but this brew should have more IBU anyway because sequoia is higher AA than amarillo. its already 90s
===================================
3/13/2021
snapshotting amarillo smash weaddababyitzaboy into this new one to try the sequoia hops. will run it exactly the same. one downside to the amarillo brew was that it couldve had more bitterness. and, i think im starting to understand where people say the west coast can be too one dimensional with only one hop.

could consider adding some light crystal for more malt flavor, or even some reddish crystal along with a more piney hop, more additions for more layered hop bitterness and flavors. maybe in the future but for this time probably just want to let the feature hop shine. its already a blend anyway.

anyway for this brew, the BSG sequoia hops will have slightly higher AA (11 instead of 8ish) and im boosing warrior addition from .73 to .80.

should double check on that salt amount...???

might run it with lutra since i have a bit of it on hand already.

i am also boosting the base malt to get it to 7% so that is taking away from my bitterness effort but it should still be in the 90s IBU. if it still comes out flat we can amp up the hops and bitterness next time.

===================================
1/28/21
brew day. measured 1.062 OG for efficiency of 70%. did double crush on the grain. everything else went smoothly. the water volume calculator was pretty spot on. not sure if i ended with 5.5 gallons or 5 tho.
===================================
1/14/2021
reformulating 10gal cane west recipe into 5 gallon weaddababyitzaboy west coast ipa featuring amarillo hops.
* scratching water profile - was going to switch to ward labs one but its difficult to arrive at the target water profile with that.
* starting with distilled water and building from there.
* swapped out centennial for amarrillo pretty much oz for oz
* adding acid malt for pH
===================================
11092020
just took FG 1005 at 90 deg which equates to 1007 at 70 so turned up attenuation to 86% to match that. ===================================
11/06/2020: brewed last night. everything went well. forgot to take pH and pre boil gravity. it looked like it was boiling slow so i turned it up last 15 minutes of boil, then after chilling i was under volume and OG at like 1.080! topped up to about 10 gallons it appeared still at or above 1065, added more water anyway since i will be having dry hop and trub losses so im estimating 10.5 gallons although it could be more. after all the finagling hit target OG of 1063 on about 10.5 gallons, split one pouch of hothead between two fermentors. lifted brew pot up to table and dispersed wort from there, no pump needed.

the water chemistry tab here is a little wonky i just fixed it to start from my estimated henrico county water to adjust to light colored and hoppy. originally it didnt carry over the profiles from the previous version of this recipe but the water agent amounts are correct. i have an updated sept 2020 water profile from facebook kicking around that i need to add here.
===================================
11/01/2020:
scaling up to 10 gal. i think it will work if i can hit this 68% efficiency. water will take some work. prob will have to treat the mash and sparge water separately - 8 gals for mash and another 6 for sparge. only using 1 lb centennial for 10 gal batch seems light but we will see. i guess west coast uses less? still at 100ibus so it will be decent. could think about using some other hops in flameout and dry hop....cascade...?
===================================
7/14/2020:
just adjusted the water profile in the calculator for 8.5 total gallons treated water and the numbers came out a little better. however a little concerned because the calculator says mash pH will be 5.6 but this recipe says 5.45. i suppose either is fine but the inconsistency is making me nervous that im screwing something up.

going forward i think it will be simpler to use RO and build from there, or try to see if there are basic / minor adjustments i can make to my water to get where i want to go (e.g. just a simple gypsum addition andor campden tab)
===================================
7/13/2020:
adjusting the hop bill based on what i have. increasing ibu from last time (this time using cryo warrior!) decided to try to use all 8oz of centennial i have from a particular Washington state farm via hop of the month. will have increased dry hop.

even though im planning to use hothead (quick turnaround) i noticed in the last brew the beer tasted great initially, then diminished, then peaked later. as such maybe try to ferment for 7 days, dry hop 3 or 4 days in, remove dry hop and cold crash for 7 days before kegging...?
===================================
6/21/2020:

for this 4th attempt at west coast this year, i will be experimenting getting to some target water profile good for west coast ipas.

for now i am going to use the light & hoppy profile built into brewers friend. the chloride cl- is high for the profile (but normal overall) but i think the only way to reduce that is to use RO water so i will just leave it. going to use gypsum (to add calcium) and phosphoric acid to reduce mash pH. we'll see

here is another reference :
https://shop.theelectricbrewery.com/pages/green-flash-west-coast-ipa

===================================
6/21/2020:
this still came out 1.010 but not dry or crisp but rather sweetish. going to take a look at water chemistry next time. (this beer was just brewed using untreated henrico va tap water)

the beer also came out hazy, orangeish. and possibly oxygenated probably because it got roughed up during dry hop / packaging stages as it was my first time dealing with the conical fermentor and spunding valve.

===================================
5/31/2020:
changing grain bill to bump sugar up from 0.5 to 1lb to try to get more dryness. ive read you can do up to 10% sugar. (they say dexrose but im just using table sugar)

also changing hop sched based on the hops i have. i was planning to use some crystal wet hops for this batch but id prefer to use them all at once 2.2 lbs which i think is going to take up a lot of loss, also i am brewing this for the first time on digiboil which may have boiling limitations so im going to fall back and just use some centennial from my hop of the month club. id prefer to use all of one so i can see if i can get the different flavor profiles....
(should i do smaller batches so i can do side by side-ish? if that, ferment in a keg with spunding valve?).
will plan to use the nugget for bittering instead of warrior.....well see.
============================================
5/7/2020:
recipe cloned from "i aint mad atcha". changing recipe in prep to rebrew. simplifying hop varieties. lowering abv a little, removing 15L. aiming for 80 some ibu again. going to mash a little lower? 150. using hothead yeast.

4/7/2020 :
brew day. swapping out the 0.9 magnum 14aa 60 min for 0.5 warrior unknown AA and 0.5 nugget 13.4AA both for 60 mins. this adds up to more IBU than it was with the magnum, but the byo article has it at 77IBU. also i am using some 2 oz 11.4AA 2018 whole hop centennial for the 15 min addition. these hops were leftover from something else, hopefully not oxidized or anything. this way i can add 2 more oz to the dry hop for more flaves. inputting the whole hop AA brought the recipe up to 77IBU. ALSO on a whim i decided to drop a pound of 2row and add .5lb cane sugar to dry it out a little bit. still doing the .5lb 15L (original byo recipe had a pound but last rendition was too sweet). if this all works according to plan i think it will be a nice beer. not sure if i am going to get close to stone. i had a stone ipa the other night. it was too dry and bitter compared to mine. looking for something in between theirs and mine.

3/31/2020:
today i am bumping the magnum and base malt amounts to increase the target IBU and OG to match the BYO article. i am blindly changing the attenuation to match the BYO FG.

this beer was weird. right now it is clear, faint bitterness, decent hop flavor, overall seems close. it is a little too sweet.

this was fermenting at a bit low temperature last month. it was in the fermentation chamber while we were away on vacay but it wasnt plugged in. when i returned it was around 50 or 55. i did cold crash it and kegged it, first week or two it was super hazy and sweet it threw me way off, i thought id confused it with mango maya base beer. it cleared up, hops began to shine more. over time

i had a recipe snafu. unsure the OG. FG is about 1.014. based on 12.5lb 2 row and adjusting attenuation for the FG i got about 6.48 abv on batch 1 (march2020)

8/26/2019 :
adapted from brew your own clone recipe. unclear when this appeared in print. https://byo.com/recipe/stone-ipa-clone/

they boil for 90 minutes (probably to get more bitterness out of less hops, those smarties) they also use perle + magnum but i will just use enough magnum for 60 mins to get up to IBU. the recipe calls for whole hops for dry hop but that will depend on availability / convenience...

Author:

Torben Vedel

Boil Size: 55.9 Litres

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 75

Mash Thickness: 2.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 30 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/26/2021 3:25 PM

Notes: Ferment at 0.8 bar.

Author:

Bob L

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.08

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 58 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/11/2018 1:46 AM

Notes: ferment 61 F 24 hrs.
ferment 58 F 9 days
rack to secondary slowly lower temp to 33 F over next 2 days
Lager 6 wks. @ 33 F
Keg 2.3 vols.
OG 1.102
FG 1.028
ABV 9.7

Author:

Dalevp

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.057

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/31/2018 6:15 PM

Notes: Boil Size: 7.00 gal
Post Boil Volume: 5.82 gal
Batch Size (fermenter): 5.50 gal
Bottling Volume: 5.25 gal
Estimated OG: 1.067 SG
Measured FG: 1.012 SG
ABV: 7.2%
Estimated Color: 5 SRM
Estimated IBU: 63 IBUs
Brewhouse Efficiency: 70.00 %
Boil Time: 60 Minutes

Grain:
67.8% - 9lbs 8oz - Pale Ale Malt
14.3% - 2lbs - Thomas Fawcett Malted Oats
14.3% - 2lbs - Flaked Oats
3.6% - 8oz - Table Sugar *late boil addition*

Hops:
First Wort Hop - 0.75 oz CTZ [14.00 %] - 22 IBUs
Boil: 15min - 1 Whirlfloc Tablet + 1 tsp Wyeast Yeast Nutrient
Boil: 5min - 2.00 oz Mosaic [12.90 %]
Boil: 5min - 1.50 oz Chinook [12.00 %]
Boil: 5min - 1.00 oz CTZ [14.00 %]
20 Minute Whirlpool 185f - 1.75 oz Citra [12.70 %]
20 Minute Whirlpool 185f - 1.75 oz Mosaic [12.90 %]
20 Minute Whirlpool 185f - 1.25 oz Centennial [10.00 %]
20 Minute Whirlpool 185f - 1.00 oz CTZ [14.00 %]
Dry Hop: 5 days - 1.50 oz Chinook [12.00 %]
Dry Hop: 5 days - 1.50 oz Centennial [10.00 %]
Dry Hop: 5 days - 1.50 oz Citra [12.70 %]
Dry Hop: 5 days - 1.50 oz Mosaic [12.90 %]
Dry Hop: 5 days - 1.00 oz CTZ [14.00 %]
*Dry hops were split into two additions, half in primary during fermentation and half in a dry hop keg*

Yeast:
Wyeast 1318 - London Ale III - 1L Starter

Mash: Full volume BIAB
Sacch rest - 60 min @ 152.0 F

Misc: 45 seconds of pure O2. Cherry Hill, NJ Tap water. Mash pH 5.27, Water Profile 2:1 Chloride:Sulfate ( 132ppm Ca, 19ppm Mg, 7ppm Na, 147ppm Cl, 74ppm SO4). Some Lactic acid was used to lower the mash pH, your water profile may vary.

Notes: Fermentation temp was 64f for 5 days then bumped to 70f for another 5 days, on the 3rd day of active fermentation half of the dry hops were added directly to primary, the other half was added in a dry hop keg on the 11th day. Tapped 14 days from brewday.

Author:

MKJ

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.069

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/24/2016 1:29 PM

Notes:

Author:

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.034

Efficiency: 78

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 52 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/5/2016 6:13 PM

Notes:

Author:

Brewcousins

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 46

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/10/2014 6:47 AM

Notes:

Author:

Timox

Boil Size: 19 Litres

Boil Time: 60

Boil Gravity: 1.033

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/1/2016 5:47 PM

Notes: Mäskivesi 8,5 L 75 C
0 66.5, u 75
15 68, u 70
30 68
45 67
60 66
75 65, u 150
90 66

Huuhteluvettä 13.5 L 85 C
OG 1.052 => 1.046 1.5 L vettä
FG 1.020

Author:

knilsson

Boil Size: 6.5 Gallons

Boil Time: 90

Boil Gravity: 1.032

Efficiency: 85

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/24/2015 11:42 PM

Notes:

Author:

Barnstaple Brewers

Boil Size: 58 Litres

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 75

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 10 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/21/2015 3:24 PM

Notes:

Author:

SlyBrewer

Boil Size: 125 Litres

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 80

Mash Thickness: 2.9

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 17 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/19/2015 6:45 AM

Notes: Make 20 litre starter day before, 2 packs US05, lightly hopped pale all 4% (1.04 SG)
Pitch when wort at 17C

HOPS - maybe shift mid boil hops to flameout hops for smoother bittering

Author:

Joiski

Boil Size: 110 Litres

Boil Time: 60

Boil Gravity: 11.9

Efficiency: 75

Mash Thickness: 2.2

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/17/2015 8:10 PM

Notes:

Author:

SchuBrew

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.029

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/12/2015 7:29 PM

Notes:

Author:

Wazza

Boil Size: 50 Litres

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/28/2014 7:30 AM

Notes:

Author:

Haresy77

Boil Size: 54 Litres

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 75

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 17 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/1/2017 8:26 PM

Notes:

Author:

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 80

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 67 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/4/2017 8:04 PM

Notes:

Author:

Shenfield Shed

Boil Size: 25 Litres

Boil Time: 70

Boil Gravity: 1.043

Efficiency: 68

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 6/6/2021 2:40 PM

Notes: