All-grain Homebrew Beer Recipes | Page 387 | Browse 225,000+ at Brewer's Friend

Author:

recreation brewery

Boil Size: 48 Gallons

Boil Time: 100

Boil Gravity: 1.045

Efficiency: 71

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/5/2014 6:21 AM

Notes: 38 lager, 5 Kolsch

Author:

Viacheslav

Boil Size: 35 Litres

Boil Time: 60

Boil Gravity: 1.031

Efficiency: 70

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 12 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/27/2018 7:56 AM

Notes:

Author:

Boil Size: 28.4 Litres

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 75

Mash Thickness: 3.1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/25/2018 7:39 AM

Notes:

Author:

Haresy77

Boil Size: 57 Litres

Boil Time: 60

Boil Gravity: 1.035

Efficiency: 78

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/18/2017 5:44 PM

Notes:

Author:

Boil Size: 55 Litres

Boil Time: 90

Boil Gravity: 1.054

Efficiency: 70

Mash Thickness: 2.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/6/2015 9:54 PM

Notes:

Author:

Bazlow

Boil Size: 12 Gallons

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 80

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/6/2015 11:04 PM

Notes: This is all the leftovers from my last few sessions. God only knows what it will turn out like.

This is my first foray into batch sparging. It is crazy efficient. Mashed in 16 Qts at 170. Sat for an hour.

Sparged with 180 water. 2 3 gallon draws. Total volume at end was 6.5 gallons at 1.42.

Author:

Crookedeyeboy

Boil Size: 31 Litres

Boil Time: 60

Boil Gravity: 1.052

Efficiency: 73

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 22 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/7/2014 10:45 AM

Notes:

Author:

Marcogold

Boil Size: 24 Litres

Boil Time: 75

Boil Gravity: 1.046

Efficiency: 75

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/10/2014 6:15 PM

Notes:

Author:

Libre Brewing Co.

Boil Size: 13 Gallons

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/26/2015 10:51 PM

Notes:

Author:

abigail.macphee

Boil Size: 1.25 Gallons

Boil Time: 80

Boil Gravity: 1.02

Efficiency: 35

Mash Thickness: 2

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/22/2017 8:42 PM

Notes:

Author:

Boil Size: 13 Gallons

Boil Time: 90

Boil Gravity: 1.072

Efficiency: 75

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/3/2017 1:09 AM

Notes: Secondary:
Soak .25 oz French Oak chips in one cup Kentucky Bourbon for 2 days. Soak ground kona coffee in 1 cup boiled, cooled water and leave overnight, covered in refrigerator. Strain out grounds and add cold coffee and bourbon, with wood chips to secondary. Rack fermented stout into this mixture and condition in secondary at 55-60F for 2-6 mos.

original recipe:
Here's a recipe from Jul/Aug 2010 Zymurgy. The recipe was built with guidance from Jeremy Kosmicki, Founders head brewer. My buddy made this and it was as good as, or maybe even better than, the real deal. Per the article "this is not an exact ounce-for-ounce recipe, but the brewery was able to share proportions".

FOUNDERS KBS CLONE
5 US Gallons

FERMENTABLES
13.25 lbs pale malt
1.5 lbs flaked oats
.75 lb roasted barley
.75 lb Belgian choc. malt
.50 lb Belgian debittered black malt
.5 lb 120L crystal malt

HOPS
1.0 oz Nugget 13% aa (60 mins)
1.25 oz Willamette 5% aa (25 mins)
1.75 oz Willamette 5% aa (10 mins)

2.5 oz Belgian bittersweet chocolate (15 mins)
1.5 oz unsweetened cocoa nibs (15 mins)
2.0 oz ground Sumatran coffee (flameout)
2.0 oz cold-brewed Kona coffee (secondary)

YEAST
American or California Ale yeast

DIRECTIONS
Boil Time 90 mins
IBU. 73
SRM 60
Specific gravity 1.092
Assumed Efficiency 75%

Infusion Mash at 155F for 60 mins. Add Hops, chocolate, and coffee as specified. Ferment for 2 weeks at 65F. Soak .25 oz French Oak chips in one cup Kentucky Bourbon for 2 days. Soak ground kona coffee in 1 cup boiled, cooled water and leave overnight, covered in refrigerator. Strain out grounds and add cold coffee and bourbon, with wood chips to secondary. Rack fermented stout into this mixture and condition in secondary at 55-60F for 2-6 mos.

Author:

Second Star Fermentations

Boil Size: 2.14 Gallons

Boil Time: 45

Boil Gravity: 1.022

Efficiency: 70

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 50 ° F

Priming Method: co2

Priming Amount: N/A

Creation Date: 7/18/2018 3:35 AM

Notes: 1) In kettle #1, combine water (about 4 quarts) at 144 °F (62 °C) and the crushed grain to achieve a temperature of 113 °F (45 °C). Mix the grain and water thoroughly and allow it to rest at 113 °F for 10 minutes. This amount of water is just enough to wet all of the grain and flour. The mash needs to be stirred well to make sure that all the grain is wetted and that no clumps of flour are present. Total time for this step is about 20 minutes, including the temperature rest.

2) Next, add enough boiling water (212 °F [100 °C]) to the mash to bring the temperature to 136 °F (58 °C). Do this over the course of 5 minutes, making sure to mix thoroughly. It will take about 4 quarts of boiling water to raise the mash temperature to 136 °F, and you will end up with a very soupy mash with plenty of excess liquid. Allow the mash to rest for 5 minutes at this temperature. Remove about 1 quart of liquid from the mash, add it to kettle #2, and heat to 176 °F (80 °C). The liquid taken off should have the appearance of milk. Once heated it will clear up and large particles of hot break will form.

3) Add more boiling water to the mash over the course of 10 minutes to bring the temperature to 150 °F (65 °C), again with constant mixing. It will take about 5 quarts to achieve this temperature. Allow the mash to rest for 30 minutes at 150 °F (65 °C). At this point, the mash will be very soupy and the liquid much less milky in appearance.

4) Remove 4 quarts of liquid from kettle #1 and add it to kettle #2, which will put it up to 5 quarts. Continue to heat kettle #2 to maintain a temperature of 176 °F (80 °C). The liquid removed from kettle #1 will be very cloudy, but not quite as milky as the liquid previously removed in step 2.

5) Add more boiling water to kettle #1 to bring the temperature to 162 °F (72 °C) and allow it to remain at that temperature for 20 minutes. Again, it will take about 5 quarts of water to reach the rest temperature. The mash should be very thin and soupy with a great deal of small particulate matter in the liquid portion.

6) After the 20-minute rest, run off the liquid from kettle #1 and bring to a boil in a third kettle. Add enough of the liquid from kettle #2, at 176 °F (80 °C), back into the mash in kettle #1 to bring the mash to a temperature of about 167 °F (75 °C). Allow the mash to rest at that temperature for 20 minutes. If any liquid is left in kettle #2, it can be added to the previously collected runoff in kettle #3.

7) After 20 minutes, recirculate the wort in kettle #1 to clarify it, and begin sparging with 185 °F (85 °C) water. Sparge until the gravity of the runoff has dropped to less than 1.008 (2.06 °P). Boil the wort, now in kettle #3, until the volume is reduced to about 5 gallons.

8) As the wort begins to boil, hop with about 4 oz of aged hops. The combined water additions and sparging should add up to about 9 gallons of wort. Total boiling time to reduce this volume to 5 gallons will depend on your equipment and methods. At the beginning of the boil, the wort will be cloudy and full of large flocculent break material. As the boil proceeds, the wort should clarify as the proteins continue to coagulate and the starch solubilizes. After boiling, the wort can be cooled using your method of choice. This method of mashing does not seem to yield the large amount of break that a typical all-malt infusion mash would yield. As stated elsewhere, however, your results may vary depending on your equipment and technique.

Author:

Friar Tom

Boil Size: 5 Gallons

Boil Time: 90

Boil Gravity: 1.047

Efficiency: 68

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/10/2019 3:44 AM

Notes:

Author:

Shenfield Shed

Boil Size: 19.35 Litres

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 75

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: co2

Priming Amount: N/A

Creation Date: 3/10/2023 4:31 PM

Notes:

Author:

Jim_in_Oregon

Boil Size: 8 Gallons

Boil Time: 60

Boil Gravity: 1.059

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/24/2014 12:13 AM

Notes: Efficiency a touch low at 65%. My biggest AG beer so far.

Added Syrup and Honey into the Secondary.

Author:

Sandved Bodbryggeri

Boil Size: 55 Litres

Boil Time: 60

Boil Gravity: 1.055

Efficiency: 73

Mash Thickness: 4.202

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/7/2015 9:20 AM

Notes: Meskevann: 55 liter
Skyllevann: 13 liter

Mesking:
- 62°C i 30 min
- 68°C i 30 min
- 75°C i 10 min

Gjæring: 18 - 20°C i 14 dager

Author:

C.Hill

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.026

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/18/2016 9:22 PM

Notes:

Author:

Happenstance Brewing Company

Boil Size: 7.75 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: Corn Sugar

Priming Amount: 3.0 oz for 21 days

Creation Date: 11/30/2012 5:41 PM

Notes: Mash at 148F
Kill the flame, add the 0 min aroma hops, then run downstairs and chill quickly!
Drop the temp Pitch and Ferment at 66F for 10 days, then raise the temp to 70F (if you can) for the last 4-7 days.
Cold Crash to 44F for 2 days before racking to secondary to knock the yeast down. Rack to secondary and raise temp to 68F, then add dry hop.
First three days: 2oz dry hop
Second three days: 3oz dry hop addition
FYI these hops offer the highest percentage of cohumulone levels by weight. . .zowie!

Author:

untapped_potential

Boil Size: 6.6 Gallons

Boil Time: 63

Boil Gravity: 1.048

Efficiency: 63

Mash Thickness: 1.45

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: 14.89 psi

Creation Date: 3/8/2020 3:35 PM

Notes:

Author:

Jojo

Boil Size: 7.25 Gallons

Boil Time: 90

Boil Gravity: 1.049

Efficiency: 81

Mash Thickness: 1.15

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 66 ° F

Priming Method: co2

Priming Amount: 11.77 psi

Creation Date: 8/16/2023 2:30 PM

Notes: this is the first attempt at somewhat of a clone of Mayflower Brewing's Thanksgiving Ale. Disclaimer, not from New England, have not tasted the beer before; just trying to target something similar.

mash additives are for adjusting my local water profile to match a "balanced profile", and for pH.

hoping to ferment at about 66F, and age for 4 weeks or so with oak chips, vanilla beans and roasted spicy mixed nuts.

then keg and carb in time for t-giving.

UPDATE: after brewing this beer, I ended up using 2oz of the oak chips, and let them age for the 4 weeks indicated. This seemed like way too much. In the end, it’s all I could taste. If I brewed this again, I would scale back the oak chips.