Homebrew Beer Recipes | Page 59 | Browse 320,000+ at Brewer's Friend

Author:

Mike Theodore

Boil Size: 8.75 Gallons

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/16/2015 6:00 PM

Notes: The beer is much better if you let it bottle condition for at least 4 weeks, 5 weeks is even better.

Author:

Jon B

Boil Size: 7 Gallons

Boil Time: 5

Boil Gravity: 1.092

Efficiency: 60

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 2.0

Primary Temp: 75 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/16/2015 4:34 AM

Notes:

Author:

Fedebrin

Boil Size: 6.2 Gallons

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/16/2016 2:56 AM

Notes:

Author:

tonik

Boil Size: 4.5 Gallons

Boil Time: 60

Boil Gravity: 1.076

Efficiency: 60

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/7/2015 11:32 PM

Notes:

Author:

Hopeful Brewing

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.037

Efficiency: 70

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 92 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/21/2021 11:09 PM

Notes: How to make video on YouTube: https://youtu.be/G2pZ12ILbfo

I wasn't sure how to indicate a step mash in BrewersFriend so I am writing it here.

The first rest is a rest for 20 minutes a little under 128 °F. Then slowly heat to 151 °F. I did this via a RIMS tube. This allowed us to us to have mini rests through the different temperature zones because it is was only heating 1 °F every 2 minutes or so.

If you don't have a RIMS tube or want to avoid step mashing in general, you can just mash in at 151 °F. Today's malts are so modified you will probably see little difference if at all. More information about step mashing can be found at https://byo.com/article/the-science-of-step-mashing/

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/24/2018 6:08 PM

Notes: Dry hop 3 days before kegging

Author:

MilesCole

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.067

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 82 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/11/2015 6:19 PM

Notes: 1st place in the Belgian/dark beer category in the Arvada on Tap competition.

Author:

mjsanders21

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 76

Mash Thickness: 1.6

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/23/2016 6:44 PM

Notes: Day 0: Vitality starter 1,000 ml with 1 pack of WLP830 for 4 hours. Pitch @ 65*F
Day 5: Dry hop
Day 10: Pour 170*F gelatine+water into keg, then transfer beer. Set to 25 PSI
Day 11: Depressurize down to 8 PSI
Day 18: Sacrifice first pint, then enjoy

Author:

Hills

Boil Size: 389 Gallons

Boil Time: 90

Boil Gravity: 11

Efficiency: 85

Mash Thickness: 1.5

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/25/2015 4:58 PM

Notes:

Author:

swissRico

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.058

Efficiency: 75

Mash Thickness: 3.18

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/28/2015 7:56 AM

Notes:

Author:

AnteK

Boil Size: 25 Litres

Boil Time: 70

Boil Gravity: 1.057

Efficiency: 73

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/18/2017 7:02 PM

Notes: My recipes are all elaborated for Speidel Braumeister 20L
The recipes clones are sometimes a little different from the original but adjusted according to the final result.

BIAB method for Braumeister 20l, efficiency 70 %
total Water: 27l.
(Hoppy NEIPA Juice, its a cloudy beer)

27l to mash / Mash ph 5.4/5.5
no Sparge
Boil Ph 5.2

Aerate the wort with pure oxygen or filtered air and pitch the yeast. Ferment at 18 to 22c˚"10/15 days"

Dry Hop "5 days" 22c˚ (*1st Dry Hop at Krausen, 3˚ day of fermentation)
20g Summit
30g Chinook

*2nd Dry Hop at Stable Gravity
50g Apollo
70g Falconer's Flight

Author:

Lonnie1

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.032

Efficiency: 65

Mash Thickness: 1.375

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 5/20/2022 1:06 AM

Notes:

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 67 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/20/2018 5:40 PM

Notes:

Author:

kcpup

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/3/2012 5:16 AM

Notes: This recipe is from Sam Calagione's book Extreme Brewing. It's called Wildflower Wheat.

The original recipe used Vanguard hops. I used a suggested alternative I had on hand at the house - Hersbrucker.

IBU's were 15 in original recipe. I used a tiny bit more because the hops, while frozen, are well over a year old.

Passed Pawn took IBUs up to about 23 in his, and used Cascade. He got good reviews on his adapted version. For my first try at this recipe, I decided to stay in the original IBU range and adapt later.

I had some Pacman recently rinsed, so I used that yeast. Passed Pawn used S-04. Sam recommended WLP320 or Wy 1010.

I use 100% RO water and build my water from there.

I use BrewVint yeast fuel as a yeast nutrient additive - it was not in the recipe.

My personal mash regimen is a first step for 15 minutes at 131, then up to sacc temp - in this case, 154. I didn't add that to recipe because most don't use a 2 step. Passed Pawn uses single infusion and has had fine success with that.

Author:

BatRastard

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/19/2013 4:47 PM

Notes: This brew won gold in the Sangre de Cristo Craft Brewers SMaSH Competition. (Single Malt and Single Hops) Very hop forward but the Citra kept it from going over the top.

Inspiration came from reading of a Hungarian brewery that came up with a "hoplager" as their answer to the American IPA. Not sure what their IBU's came in at but I know I exceeded it. Never planned on it winning and was striving for outlandish. I thought I hit my mark but everyone who's tried it, liked it. (I'll try more hops next time ;) )

If you choose to make this beer make sure you do a good diacetyl rest and give it plenty of time to lager. Mine came out crystal clean with no off flavors. (that's what saved it with the judges)

Author:

Papini

Boil Size: 30 Litres

Boil Time: 60

Boil Gravity: 1.044

Efficiency: 73.3

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 19 ° C

Priming Method: co2

Priming Amount: 0.93 bar

Creation Date: 11/2/2015 2:09 AM

Notes: Relação BU/GU - 0,7

Adição dos sais e acidos separados para o Mash e o Sparge.
Enzima Ultraflo Max somente na água do Mash.

Perfil da água objetivo para o estilo Strong Bitter:
Cálcio - 50-100 mg/l
Magnésio - 0-30 mg/l
Sódio - <100 mg/l
Cloreto - 50-100 mg/l
Sulfato - 100-380 mg/l
Alcalinidade Total - 40-120 ppm - Esperado 117,7
Alcalinidade Residual - 0-60 ppm - Esperado 6,5
PH 5,40 - Esperado

Relação sulfato/cloreto - 1,2 - Balanceado

Nutriente para levedura Yestamina bio4 - 1 capsula nos 15 minutos finais da fervura.

1 pacotes do fermento Lallemand London.
Considerando Pitching Rate de 8 Bilhões de Celulas por grama.
Starter com 1,0L e 100g DME: 0.80M cells / mL / °P

Fermentação:
18°C por 2 dias
19°C por 1 dia
20°C por 1 dia
21°C por 1 dia
22°C por 1 dia

Abaixar 4°C por dia até 0°C e manter por 2 semanas.

Author:

Jason Cox

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.031

Efficiency: 60

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/8/2017 11:08 PM

Notes: Directions provided by Midwest Supply. See link.

Heat Strike Water:
Heat at least 4 gallons of water to 160–165º, depending on the temperature of your grain. Mash temperature should be 152º F.

Mash in:
Using a mash paddle, mix the crushed grain with the water. Make sure to mix it up well to avoid any dry pockets, or “dough balls”.

Once the mash is well mixed and sitting at 152º F, cover and let it rest for 60 minutes.

Sparge:
While your mash is resting, heat 5 gallons of water to 168º F. Perform a batch sparge to collect 7 gallons of wort and bring to a boil.

The Boil:
As soon as you see a rolling boil, set your timer for 60 minutes and add 0.5 oz Centennial hops.

Boil for 40 minutes then add 1 oz Cascade hops.

Boil for 10 minutes then add 1 oz Cascade hops.

Boil for 10 minutes then add 2 oz Citra hops and turn off heat. Allow to steep 10 minutes before chilling.

Cool and Aerating the Wort:
Cool the wort to below 80°F using an ice bath, adding ice made from boiled water to top off your full volume, or using a wort chiller (best method). Once your wort is below 80°F, transfer it into your primary fermentor, and take a hydrometer reading. See our FAQs for tips on taking a hydrometer reading.

Use One of These Methods for Aeration:
• Pour the cool wort between two sanitized buckets several times.
• Mix and stir vigorously for several minutes with a sanitized spoon.
• Aerate with the Midwest Supplies Aeration system for up to 10 minutes (7862).
• Add pure oxygen for 2 minutes with the Midwest
Supplies’ Oxygenation Kit 2.0 (40033).

Fermentation:
Pitch (add) your yeast and store your fermentor in a dark area with
a stable temperature of 65–72°F. Leave until primary fermentation is complete, usually between 7–14 days. If you’re unsure, take a hydrometer reading.

Optional, but highly recommended: Rack to a 5 gallon carboy for secondary fermentation and aging. Midwest recommends a 3 week secondary fermentation for this kit.

Dry Hops:
5-10 days before packaging the beer add 1 oz Citra and 1 oz
Cascade to the fermenter.

Bottling:
Remember to clean and sanitize all of your bottling gear. Mix priming
sugar with 2 cups of water and boil for 5 minutes. Cool and add to your bottling bucket. Rack your beer on top of the priming solution, making sure it gets mixed in well. Bottle and cap. Once bottled, store in a dark place between 65–72°F for 1–2 weeks to carbonate.

Enjoy with friends and family!

Author:

Boil Size: 13 Gallons

Boil Time: 60

Boil Gravity: 1.066

Efficiency: 65

Mash Thickness: 1.3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/12/2019 11:31 PM

Notes:

Author:

Boil Size: 13 Gallons

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 68

Mash Thickness: 1.39683

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/19/2017 6:50 PM

Notes:

Author:

John LaFramboise

Boil Size: 8 Gallons

Boil Time: 60

Boil Gravity: 1.036

Efficiency: 72

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 60 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/9/2018 3:34 AM

Notes: Lightly taken from the source for a reference Kolsch recipe, adding SeaQuench Ale qualities.

Kettle Sour/Sour Mash - sour the night before, check sourness next morning to see if it has become sour enough. If not, continue to let it sour. Otherwise, sparge if necessary and then proceed with recipe as normal.

Pitch Yeast at 65F when beer is chilled to this temp. Cool to 60 for 5-7 days afterwards. Bring up to 65 for ~1 day for diacetyl rest. Rack then age at 35F for 21-30 days.