Homebrew Beer Recipes | Page 14669 | Browse 295,000+ at Brewer's Friend

Author:

JegErOsten

Boil Size: 25 Litres

Boil Time: 90

Boil Gravity: 1.034

Efficiency: 70

Mash Thickness: 2.4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: sucrose

Priming Amount: 138.9 g

Creation Date: 9/11/2020 9:40 AM

Notes: Grain bill loosely based on Exmoor Ale - CAMRA page 170.

Wet hops unknown - from a bine planted 60 years ago by an Irish guy in his Kent garden.

Smell minty and grassy - possibly Fuggles

Author:

JimD

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/9/2015 7:21 PM

Notes: Fermentation was started by 6:00A.M. Sunday morning.

Used Galaxy to dry hop. Tuesday 05-26-15

Author:

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: 1.033

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 4/11/2020 1:44 PM

Notes:

Author:

rolandblais

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.059

Efficiency: 70

Mash Thickness: 1.4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/1/2017 4:28 PM

Notes: The grains are a total guess, used in those amounts to get the Gravity I ended up at when fermentation started. If/When I track down the actual recipe, I'll adjust accordingly.

From the authors:

"This beer's OG should be 1.059 and its FG 1.011."

This 2 gallon batch was created by using 2 1 gallon Brooklyn Brew Shop Mojito Ale kits.

https://brooklynbrewshop.com/products/beer-making-mix-mojito-ale

Instructions are outlined here, but my mashing mashing was done "BIAB" style, no sparging.

https://brooklynbrewshop.com/pages/instructions-mojito-beer

1: The Mash
During The Mash, you're extracting all the sugars, color and flavor you can from grain. You're basically just steeping grain in hot water. It's a lot like making oatmeal.

Heat 2 quarts (1.9 liters) of water to 160°F (71°C).
Add grain (This is called “mashing in.” Take note of jargon. Or don’t).
Mix gently with spoon or spatula until mash has consistency of oatmeal. Add water if too dry or hot. Temperature will drop to ~150°F (66°C).
Cook for 60 minutes at 144-152°F (63-68°C). Stir every 10 minutes, and use your thermometer to take temperature readings from multiple locations.
You likely don’t need to apply heat constantly. Get it up to temperature, then turn the heat off. Monitor, stir, and adjust accordingly to keep in range.
After 60 minutes, heat to 170°F (77°C) while stirring constantly (“Mashing Out”).

2: The Sparge
If you're familiar with brewing coffee, you should have an idea of how The Sparge works. During The Sparge, you put the grain in a strainer and pour hot water over it to draw out all those sugars you created during The Mash.

Heat additional 4.5 quarts (4.26 liters) of water to 170°F (77°C). (If possible, start this during The Mash to save time.)
Set up your “lauter tun” (a strainer over a pot).
Carefully add the hot grain mash to the strainer, collecting the liquid that passes through.
This liquid is called “wort” (pronounced “wert”). It will be your beer.
Slowly and evenly pour 170°F (77°C) water over the mash to extract the grain’s sugars.
You want to collect 5 quarts (4.75 liters) of wort. You will lose about 20% to evaporation later on, so you want to start with a bit more than you’ll end with.
Re-circulate wort through grain once.

3: The Boil
The Boil is probably the easiest step to understand because it's as simple as it sounds. During this step, you're bringing your wort to a low, rolling boil and keeping it there for a period of time while adding things like hops or spices. It's a lot like cooking a soup or stock in that you'll add heartier or bittering ingredients toward the beginning and more delicate and aromatic ingredients toward the end.

In a pot, heat wort until it boils.
Keep boiling until you’ve hit the “hot break” (Wort will foam - you may need to reduce heat slightly so it doesn’t boil over.)
Stir occasionally. All you want is a light boil – too hot and you lose fermentable sugars and volume.
The boil will last 60 minutes. Start your timer and add in the rest of the ingredients at these times:
Add 1/4 Hops at start of boil.
Add 1/4 Hops 30 minutes into the boil.
Add 1/4 Hops 45 minutes into the boil.
At 60 minutes turn off heat. Add remaining Hops, Fresh Mint, and Lime Peel. Dissolve Candi Sugar.
Twenty percent of the wort will have evaporated in this step leaving you with 1 gallon (3.8 liters) of wort. If your boil was a bit high, the surface area of your pot extra large, or you brewed on a really hot day, you may have less than the full amount. Don’t worry – you just reduced your beer a bit too much, but you can add more water in the next step

4: Fermentation
This is when your beer actually becomes alcoholic. During Fermentation, your jugs should sit somewhere out of the way (and out of direct sunlight) while ale yeast turns sugar into alcohol.

Place brew pot in an ice bath until it cools to 70°F (21°C).
Once cooled, place strainer over funnel and pour your beer into the glass fermenter. Yeast needs oxygen. The strainer helps aerate your wort and clarify your beer (as well as catch any sediment from going into the fermenter). Add tap water to bring wort up to 1 Gallon mark if level is low.
“Pitch” yeast. (Toss the whole packet in.)
Shake aggressively. You’re basically waking up the yeast and getting more air into the wort.
Attach sanitized screw-top stopper to bottle. Slide rubber tubing no more than 1” (2.5 cm) into the stopper and place the other end in small bowl of sanitizer solution. You’ve just made a “blow-off tube”. It allows CO2 to escape.
Let sit for two or three days or until vigorous bubbling subsides. This is when fermentation is highest. You may notice bubbles and foam at the top of the beer. After bubbling calms down, clean tubing and ready your airlock.
Sanitize, then re-assemble airlock, lling up to line with sanitizer.
Insert airlock into hole in stopper.
Keep in a dark place at room temperature for two weeks without disturbing other than to show off to friends. (If beer is still bubbling, leave sitting until it stops.)
In the meantime, drink beer with self-closing swing tops, or ask for empties at a bar that has some. If you have a bottle capper and caps, you can save two six packs of non-twistoff beers instead.

5: Bottling (2 Weeks Later)
Once your beer's in bottles, it carbonates naturally with the help of just a little extra sugar. It wakes up your ale yeast (that went dormant during fermentation) to create just enough bubbles for some nice fizz.

Thoroughly rinse bottles with water, removing any sediment.
Mix remaining sanitizer with water.
Fill each bottle with a little sanitizer and shake. Empty after two minutes, rinse with cold water and dry upside down.
Dissolve 3 tablespoons honey with 1/2 cup water. Pour into a sanitized pot. You will be siphoning your beer into the same pot in the next steps.
Carbonation comes from adding sugar when bottling, so if you filled your jug with less than the full gallon in the last step, use less honey when bottling. Using the full amount can result in your beer being over-carbonated.
Siphoning (It all happens pretty fast. You may want to practice on a pot of water a few times.) To see it in action first, watch the How to Bottle video at brooklynbrewshop.com/instructions.
A. Attach open tubing clamp to tubing.
B. Fill tubing with sanitizer.
C. Attach sanitized tubing to the short curved end of your sanitized racking cane. Attach the black tip to the other end - it will help prevent sediment from getting sucked up. It will probably be a snug fit, but you can get it on there.
D. Pinch tubing clamp closed.
E. Remove screw-cap stopper and place racking cane into jug, just above the sediment at the bottom (“trub”).
F. Lower end of tubing not connected to racking cane into sink. Suction will force beer up and through the racking cane and tubing. Open tubing clamp, let sanitizer flow into sink until beer just starts to flow out of the tubing, then clamp shut. Open clamp on tubing, allowing beer to flow into pot with sugar solution. Tilt jug when beer level is getting low, but be careful in not sucking up the trub.
Siphon beer from pot into bottles, pinching tube clamp to stop flow after each bottle.
Close bottles.
Store in a dark place for 2 weeks.

6: Enjoy (Two Weeks Later)
You did it! You made beer.

Put beers in the fridge the night before you drink them.
Drink. Share with friends if you’re the sharing type.

Author:

Hartest Brewing Co

Boil Size: 93.5 Litres

Boil Time: 60

Boil Gravity: 1.029

Efficiency: 75

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/15/2017 4:52 PM

Notes:

Author:

mpgerton

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 65

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/30/2017 4:01 PM

Notes:

Author:

DasBeef

Boil Size: 8 Litres

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/4/2015 7:27 PM

Notes:

Author:

brouty

Boil Size: 28.05 Litres

Boil Time: 90

Boil Gravity: 1.056

Efficiency: 70

Mash Thickness: 3.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/17/2021 5:27 PM

Notes:

Author:

Boil Size: 6.25 Gallons

Boil Time: 60

Boil Gravity: 1.08

Efficiency: 75

Mash Thickness: 1.4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/10/2018 11:14 PM

Notes:

Author:

Dany Gervais

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 80

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/24/2016 4:09 PM

Notes:

Author:

Lee HC

Boil Size: 21 Litres

Boil Time: 80

Boil Gravity: 1.038

Efficiency: 52

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 8/27/2020 10:04 AM

Notes:

Author:

Timoteo

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.062

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 4/10/2022 7:06 PM

Notes:

Author:

waltown

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/30/2019 3:08 AM

Notes:

Author:

DeLiquid

Boil Size: 17 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.5

Primary Temp: 67 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/15/2019 1:39 PM

Notes:

Author:

Kanki

Boil Size: 23 Litres

Boil Time: 75

Boil Gravity: 1.067

Efficiency: 68

Mash Thickness: 4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 21 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/23/2018 9:02 AM

Notes:

Author:

GregH

Boil Size: 25 Gallons

Boil Time: 60

Boil Gravity: 1.112

Efficiency: 68

Mash Thickness: 1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/16/2018 8:06 PM

Notes:

Author:

GF Brews

Boil Size: 6 Gallons

Boil Time: 90

Boil Gravity: 1.064

Efficiency: 85

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 60 ° F

Priming Method: sucrose

Priming Amount: N/A

Creation Date: 1/28/2022 11:52 PM

Notes: Ron Pattinson is one of the few beer writers doing research on primary material from brewery records. His blog "Shut Up About Barclay Perkins" has a ton of great insight into stout and porter history (among other things). He also has a number of books for sale which include transcriptions of historical beers for amateur and commercial brewer alike. None of those books are aimed at a gluten free audience of course, but good inspiration nonetheless.

This is a GF adaptation of an 1883 recipe he in turn adapted from grist, hopping rate and OG information found in A Bottle of Guinness, Please by David Hughes. Ron's version is found in "Home Brewers Guide to Vintage Beers" (available for purchase in ebook format).

Author:

diggidee

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.033

Efficiency: 68

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/11/2018 12:04 PM

Notes:

Author:

Neumeyer

Boil Size: 7.5 Gallons

Boil Time: 90

Boil Gravity: 1.069

Efficiency: 78

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: sucrose

Priming Amount: N/A

Creation Date: 9/27/2018 2:12 PM

Notes:

Author:

JFKBrews

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.057

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: dextrose

Priming Amount: 5 oz

Creation Date: 4/2/2021 4:19 PM

Notes: