Extract Homebrew Beer Recipes | Page 159 | Browse 30,000+ at Brewer's Friend

Author:

dstarkMB

Boil Size: 12.5 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/29/2014 4:57 AM

Notes: (Notes from my Original Recipe, man has my knowledge grown since this first batch!)

I like to add the Lactose in the last 15 minutes of the boil. I've switched from adding the Vanilla to the boil to adding it into the primary Fermenter, in English, I retain a lot of the taste of Vanilla that from when I was adding to the boil. This should have a decent balance.

Author:

Chris Parsons

Boil Size: 12 Litres

Boil Time: 60

Boil Gravity: 1.083

Efficiency: 90

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.5

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/1/2016 11:48 AM

Notes: Add "late addition" DME at 15min mark.

Add IrishMoss at 15min mark

Author:

AsibBounder

Boil Size: 16 Litres

Boil Time: 60

Boil Gravity: 1.071

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: dextrose

Priming Amount: 95

Creation Date: 6/8/2014 3:19 PM

Notes:

Author:

JakeKelley

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.074

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/28/2016 12:05 AM

Notes:

Author:

AsibBounder

Boil Size: 16 Litres

Boil Time: 60

Boil Gravity: 1.063

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 19 ° C

Priming Method: dextrose

Priming Amount: 125

Creation Date: 4/16/2015 3:34 PM

Notes:

Author:

Nikki

Boil Size: 1.25 Gallons

Boil Time: 60

Boil Gravity: 1.101

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/12/2015 6:16 PM

Notes: This is just a 2.5 gallon batch to prepare a big yeast cake of wlp 099 for an american barleywine. Should be an easy drinking pale ale like brew. I have not made an extract brew since my first brew. Should be interesting..

Strangely this beer finished at SG 1.022 !

Perhaps the DME used was not good and fully fermentable. Bottled on 10/24 with 1.7 oz of cane sugar

%ABV 3.6%

note that barley wine used with this yeast cake is actively fermenting so nothing happened to the yeast. this should have dried out!

Author:

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.059

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/13/2016 7:29 PM

Notes:

Author:

letdarri

Boil Size: 10 Litres

Boil Time: 60

Boil Gravity: 1.104

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 22 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/18/2016 7:06 PM

Notes:

Author:

Houses 3 Brewing

Boil Size: 4 Gallons

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: Priming Sugar

Priming Amount: 3/4 cup

Creation Date: 1/21/2015 3:22 AM

Notes:

Author:

social_misfit

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.021

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 60 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/30/2013 11:19 AM

Notes:

Author:

redan499

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.113

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 62 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/22/2015 6:42 PM

Notes: Used Golden Light LME from Northern Brewer.

===========================================

Primary for 21 days.

Dry Hop. Let sit for 2 more weeks.

Bottle condition for 2 weeks. Drink fresh.

Author:

ferinamj

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 73 ° F

Priming Method: dextrose

Priming Amount: 4.7 oz

Creation Date: 7/14/2021 8:00 PM

Notes:

Author:

wbg126

Boil Size: 1.25 Gallons

Boil Time: 30

Boil Gravity: 1.039

Efficiency: 5

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.75

Primary Temp: 67 ° F

Priming Method: Corn Sugar

Priming Amount: .8 oz

Creation Date: 6/7/2017 12:28 AM

Notes: Prewort hopped with cascade

Author:

John L

Boil Size: 4.5 Gallons

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.25

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/20/2016 4:08 PM

Notes:

Author:

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.179

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.0

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/15/2016 3:10 PM

Notes:

Author:

Max M

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.091

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/1/2018 11:25 PM

Notes: Add the first 3 lbs of DME @ 60 minutes. Add the other 3 lbs @ 5 minutes, pausing the clock while the water stops boiling. Each time use 2 lbs wheat, 1 lb Pilsen.

Author:

Eldritch Brewer

Boil Size: 1 Gallons

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/18/2015 9:14 PM

Notes:

Author:

okiemurse

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.132

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/25/2016 1:06 AM

Notes: http://www.northernbrewer.com/documentation/beerkits/Grapefruit-Pulpin.pdf

O.G: 1.065 READY: 6 WEEKS
1–2 weeks primary, 2–4 weeks secondary,
1–2 weeks bottle conditioning

MAILLARD MALTS
SPECIALTY GRAIN
- 0.5 lbs Dingemans Cara 20
- 0.25 lbs Briess Caramel 20
MAILLARD MALTS
EXTRACTS & OTHER FERMENTABLES
- 6 lbs Gold malt syrup (60 minutes)
- 3.15 lbs Gold malt syrup (20 min late addition)
HOPTIMUS REXTM
PREMIUM HOPS
& OTHER FLAVORINGS
- 0.5 oz Chinook (60 min)
- 0.5 oz Cascade (20 min)
- 0.5 oz Chinook (20 min)
- 0.5 oz Cascade (5 min)
- 0.5 oz Chinook (5 min)
- 1 oz Amarillo (0 min)
- 0.5 oz Chinook (0 min)
- 1 oz Cascade (dry hop)
- 1 oz Simcoe (dry hop)
- 2 oz Grapefruit peel (dry hop)
OTHER (NOT INCLUDED)
- 4 oz Vodka (Soak grapefruit peel in it for 2 days before dry
hopping)
YEAST
Dry yeast (default) Safale US-05. Optimum
temperature: 59°-75°F
Liquid yeast option: Wyeast 1056 American Ale.
Optimum temp: 60°-72°F
White Labs WLP001 California Ale Yeast.
Optimum temp: 68°-73°F
PRIMING SUGAR
- 5 oz Priming Sugar (save for Bottling Day)

PROCEDURE
A FEW DAYS BEFORE BREWING DAY
1. Remove the liquid Wyeast pack from the refrigerator,
and “smack” as shown on the back of the yeast package.
Leave it in a warm place (70–80° F) to incubate until the
pack begins to inflate. Allow at least 3 hours for inflation;
some packs may take up to several days to show inflation.
Do not brew with inactive yeast — we can replace the
yeast, but not a batch that fails to ferment properly. If you
are using dry yeast, no action is needed.
ON BREWING DAY
2. Collect and heat 2.5 gallons of water.
3. For mail-order customers grains for extract kits come
crushed by default, but if you requested uncrushed grains,
crush them now. Pour crushed grain into supplied mesh
bag and tie the open end in a knot. Steep for 20 minutes
or until water reaches 170°F. Remove bag and discard.
4. Bring to a boil and add the 6 lbs Gold malt syrup.
Remove the kettle from the burner and stir in the
Gold malt syrup.
5. Return wort to boil. The mixture is now called “wort”,
the brewer’s term for unfermented beer.
- Add 0.5 oz Chinook hops and boil for 60 minutes.
- Add 0.5 oz Cascade hops, 0.5 oz Chinook hops and 3.15 lbs Gold
malt syrup 20 minutes before the end of the boil.
- Add 0.5 oz Cascade hops and 0.5 oz Chinook hops 5 minutes
before the end of the boil.
- Add 1 oz Amarillo and 0.5 oz Chinook hops with 0 minutes
remaining in the boil. Remove from heat.
6. Cool the wort. When the 60-minute boil is finished,
cool the wort to approximately 100° F as rapidly as
possible. Use a wort chiller, or put the kettle in an ice
bath in your sink.
7. Sanitize fermenting equipment and yeast pack. While
the wort cools, sanitize the fermenting equipment –
fermenter, lid or stopper, fermentation lock, funnel, etc –
along with the yeast pack and a pair of scissors.
8. Fill primary fermenter with 2 gallons of cold water, then
pour in the cooled wort. Leave any thick sludge in the
bottom of the kettle.
GRAPEFRUIT PULPIN’
9. Add more cold water as needed to bring the
volume to 5 gallons.
10. Aerate the wort. Seal the fermenter and rock
back and forth to splash for a few minutes, or use an
aeration system and diffusion stone.
11. OPTIONAL: if you have our Mad Brewer Upgrade
or Gravity Testing kits, measure specific gravity of the
wort with a hydrometer and record.
12. Add yeast once the temperature of the wort is 78°F
or lower (not warm to the touch). Use the sanitized
scissors to cut off a corner of the yeast pack, and
carefully pour the yeast into the primary fermenter.
13. Seal the fermenter. Add approximately 1 tablespoon
of water to the sanitized fermentation lock. Insert the
lock into rubber stopper or lid, and seal the fermenter.
14. Move the fermenter to a warm, dark, quiet spot until
fermentation begins.
BEYOND BREWING DAY, WEEKS
1–2
15. Active fermentation begins. Within approximately
48 hours of Brewing Day, active fermentation will
begin – there will be a cap of foam on the surface of
the beer, and you may see bubbles come through the
fermentation lock.
16. Active fermentation ends. Approximately 1–2 weeks
after brewing day, active fermentation will end: the cap
of foam falls back into the new beer, bubbling in the
fermentation lock slows down or stops.
17. Transfer beer to secondary fermenter. Sanitize
siphoning equipment and an airlock and carboy bung
or stopper. Siphon the beer from the primary fermenter
into the secondary.
BEYOND BREWING DAY—
SECONDARY FERMENTATION
18. Secondary fermentation. Allow the beer to
condition in the secondary fermenter for 1-2 weeks
before proceeding with the next step. Timing now is
somewhat flexible.
19. Add the dry hops. Add 1 oz Cascade, 1 oz Simcoe
and the vodka/grapefruit peel mixture to the
secondary fermenter 5-7 days before bottling.
BOTTLING DAY—ABOUT 1 MONTH
AFTER BREWING DAY
20. Sanitize siphoning and bottling equipment.
21. Mix a priming solution (a measured amount of sugar
dissolved in water to carbonate the bottled beer) of 2/3
cup priming sugar in 16 oz water. Bring the solution to a
boil and pour into the bottling bucket.
22. Siphon beer into bottling bucket and mix with
priming solution. Stir gently to mix, don’t splash.
23. Fill and cap bottles.
1–2 WEEKS AFTER BOTTLING DAY
24. Condition bottles at room temperature for 1–2 weeks.
After this point, the bottles can be stored cool or cold.
25. Serving. Pour into a clean glass, being careful
to leave the layer of sediment at the bottom of the bottle.

Author:

MaxMalt

Boil Size: 18 Litres

Boil Time: 60

Boil Gravity: 1.078

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 95 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/12/2016 7:50 PM

Notes:

Author:

Wicked Pissa Brewers

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.118

Efficiency: 50

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/16/2017 8:06 PM

Notes: Cat Piss IPA
Type – Extract:
Batch size: 5 gal
Boil Size: 2.5 gal
Boil Time: 60 min
Fermentation Stage: Two Stages - 2 weeks primary, 4 weeks secondary
Original Gravity: 1.059
Final Gravity; 1.014
ABV: 5.98%
IBU: 81.98

Ingredients:
2.5 Gallons Tap Water
4 Gallons Bottled Water – Note: even though this is a 5 gallon recipe, you will need extra because of the fluid loss during the boil process
1lb American Two Row
1lb Carahell
.5lb Cara Pils/Dextrine
3lbs Dry Malt Plain Amber Extract
3lbs Dry Malt Plain Light Extract
3oz Northern Brewer hops
2oz Simcoe hops
1oz Centennial Hops
1 Pack Nottingham Dry Ale Yeast

Procedure:
Start with 2.5 gal tap water, heat to 165 degrees and steep grains for 20 minutes
Remove grains and bring wort to boil
Remove pot from heat, add 3lbs Dry Malt Plain Light Extract, 3lbs Dry Malt Plain Amber Extract and return wort to boil
Add 2oz Northern Brewer hops and boil for 60 minutes
Add 1oz Simcoe hops and boil for 45 minutes
Add 1oz Simcoe hops and boil for 30 minutes
Add 1oz Northern Brewer hops and boil for 10 minutes
Add bottled water to bring the specific gravity to 1.059 and cool work to 70 degrees
Add Nottingham Ale Yeast

Fermentation:
Primary – 2 weeks at 60-68 degrees
Secondary – 4 weeks at 60-68 degrees
Add 1oz Centennial hops to secondary fermenter 5 – 7 days before bottling day
Bottle beer 5 - 7 days after dry hop addition

Bottling:
6 weeks after brew date
Use .2oz of corn sugar per gallon of beer
Condition beer for 4 weeks at room temperature