All-grain Homebrew Beer Recipes | Page 178 | Browse 225,000+ at Brewer's Friend

Author:

cochran brew house

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/14/2012 11:38 PM

Notes:

Author:

Boil Size: 14.4 Gallons

Boil Time: 70

Boil Gravity: 1.053

Efficiency: 73

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/10/2015 5:49 PM

Notes:

Author:

Abbey Road Brewing

Boil Size: 25.85 Litres

Boil Time: 60

Boil Gravity: 1.031

Efficiency: 76

Mash Thickness: 2.6

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/24/2021 10:16 PM

Notes: v1,

10ml of crs added too the mash

11ml of crs added to 16l of sparge water (full hlt)

10g of dwb (salts) added to grains to treat 15l mash

V2,

10ml of crs added too the mash

10ml of crs added to 16l of sparge water (12l used)

11g of dwb (salts) added to grains to treat 17l mash

increased ekg hops from 30g to 40g

Author:

TMA77

Boil Size: 26.5 Litres

Boil Time: 70

Boil Gravity: 1.039

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 22 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/25/2012 10:22 AM

Notes: This is a version of the traditional Australian Sparkling Ale, the only existing version is made by the Coopers brewery in Adelaide South Australia.
This is my version using traditional Australian Pride of Ringwood but with the addition of EKG which is used somewhat is Australian traditional beers.
No late flavour hops should be added to this style!
(Though I do add a pinch of EKG in the whirlpool for little interesting aroma)

Author:

Mogad

Boil Size: 26.5 Litres

Boil Time: 60

Boil Gravity: 1.088

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/16/2019 9:10 AM

Notes:

Author:

llvtt

Boil Size: 7 Gallons

Boil Time: 90

Boil Gravity: 1.049

Efficiency: 74

Mash Thickness: 1.4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/7/2016 5:29 AM

Notes:

Author:

Boil Size: 60 Litres

Boil Time: 75

Boil Gravity: 1.04

Efficiency: 70

Mash Thickness: 3.1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/12/2016 11:06 PM

Notes:

Author:

gorefisted@gmail.com

Boil Size: 7 Gallons

Boil Time: 90

Boil Gravity: 1.065

Efficiency: 71

Mash Thickness: 1.3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/18/2015 8:28 PM

Notes: First beer made using our newly-put-together HERMS system, the first major update we've made to our brewing equipment since starting in late 2013. For this one, we're doing a strong English style ale aged for (probably) 6 weeks in our Damnation Alley bourbon barrel.

3/15/15: Brew day for this one. Things are going somewhat strangely (lots of spilling water and some wort loss, but overall we've corrected everything well all things considered) given our lack of experience with the new system, and we don't have our PID controller to electronically control the temperatures, so we have been having to manually track temperatures and fire the burners on the stove at discretionary times to keep things going smoothly. The recirculation part is working very well so far. -AP

3-21-15: switched from blow-off assembly to airlock. Has been sitting at 70 degrees for one week, krausen has already died down. I don't think it's a stall -- just not a very aggressive ferm. Took a whiff of the carboy and everything smelled good; solid nose of english hops and maris otter (no shit, eh?). Looking forward to racking this into barrel next weekend. -PG

3/27/15: Just transferred to bourbon barrel. Hydrometer reading was a bit higher on FG than we wanted (only reached about 72% attenuation, finishing at 1.025 instead of the expected 1.022). Not really gonna complain because it still comes out almost 9.5%. The sample before conditioning and aging tasted really good, but pretty mild. Very genuine "British" style strong ale flavor; subtle caramel/toffee with some slight fruity esters; rather dry though it leads off sweet. No heat from the rather high alcohol either, which was nice. Extended barrel-aging (six weeks at minimum for this one) should make this one awesome. -AP

5/10/15: Just took this from barrel to bottles last night. Conditioning with a slurry of the same a yeast used for primary (WLP007). Tasted really good from the small sample we pulled from the barrel; slightly fruity, very woody and bourbon forward with a long, dry yet full-bodied finish. Excited to see how it conditions in several weeks.

5/29/15: Tasting from a bottle that was opened 5/27 and re-sealed with about half of the beer remaining. It's been in bottles about 3 weeks at this point and it actually has, according to Pat, already carbonated pretty decently. The several ounces I pulled were slightly oxidized because the bottle had been re-sealed, however. Scent is hefty English toffee, light stone fruit (cherry/plum in particular) and bourbon. The spirit character is nicely noticeable, likely due to the six weeks of aging the beer underwent in our Damnation Alley barrel. Flavor is pretty incredible actually; I'm getting a lot of tannic notes from the barrel, slight tart cherry, bourbon, caramel and the aforementioned toffee all in a really complex yet approachable package. Very excited with how this one continues to develop. It's pretty perfect right now; almost exactly what I feel like we wanted to get out of it. Very cool. -AP

Author:

stickybrad@gmail.com

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 72 ° F

Priming Method: dextrose

Priming Amount: 3 oz

Creation Date: 5/23/2016 8:47 PM

Notes: Ferments in 7-9 days. Bottle or keg with dextrose.

Best in show in the 2016 Hilo Homebrew Competition, recognized by the American Homebrewers Association.

Author:

bernieswagwinston

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.037

Efficiency: 60

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/12/2016 12:56 PM

Notes:

Author:

Stellenbosch

Boil Size: 25 Litres

Boil Time: 60

Boil Gravity: 1.177

Efficiency: 80

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/13/2015 6:18 PM

Notes: mash 64-66C, left for the whole night. First running-offs collected, the rest went for distillation. 6-hour-long boil.
gravity around 1.220, but it is out of scale. 1H NMR doesn't give an answer. Try to evaporate a sample to check what is the sugar content.
Evaporation (60°C, 7days, air circulation) of 50g sample left 25g solids;this means that the wort was 50°P which equals 1.233 g/cm3.
Fermenter was left open @20°C, fermentation picked up after 3 days (!). 15.10.2015

Warto poznać za fundamentalną pracą G.E. Habicha pt. Schule der Bierbrauerei (szkoła browarnictwa)[2]:

Z 1000 kg słodu i 5 kg chmielu produkowane jest około 10,5 hl (1050 litrów) piw

piwa jopejskie trzeba było bardzo szybko schłodzić
By zapewnić naprawdę szybkie parowanie gorącego wywaru przelewano go w duże płaskie kadzie
Wydobyte z pleśniowych jaskiń piwo filtrowano, beczki zamykano, ale proces dalszej, już bardzo powolnej i spokojnej fermentacji trwać musiał jeszcze cały rok

Warto dodać, bo nie wszyscy o tym mówią, że było to także kwaśne piwo. Poziom kwasu mlekowego był całkiem duży, na poziomie około 2% – czyli tak jak w lambicu. Jednak tutaj zostawała olbrzymia ilość cukrów resztkowych, więc kwaśności nie było aż tak czuć
Jakość tego wyjątkowego piwa była rzekomo testowana w bardzo oryginalny sposób. Otóż zawartość pierwszego kufla wylewano na ciężką drewnianą ławę, na której następnie siadali piwosze, by błyskawicznie się podnieść. Jeśli ława unosiła się wraz z nimi, można było kontynuować konsumpcję. Można się zastanawiać, ile prawdy jest tym zwyczaju, ponieważ podobne procedury istnieją w Bawarii – jeśli piwosz w skórzanych spodniach przyklei się do oblanej piwem ławy, oznacza to, że trunek jest odpowiednio treściwy.
http://akademia-piwa.pl/index.php?option=com_content&view=article&id=66%3Apiwo-jopejskie&catid=35%3Ahistoria-piwowarstwa&Itemid=27
Dzięki dziełu „Schule der Bierbrauerei” autorstwa G. E. Habicha, opublikowanemu w 1865 r., możemy poznać kilka technicznych szczegółów produkcji.

Zacieranie odbywało się metodą infuzyjną, zaś obciągniętą brzeczkę gotowano czasem nawet do 20 godzin, aby osiągnąć pożądaną gęstość. Dzięki tym zabiegom z 1000 kg słodu i 5 kg chmielu uzyskiwano ok. 10,5 hl zielonego piwa

http://barclayperkins.blogspot.co.za/2014/06/danziger-jopenbier-again.html

Top-fermented beers, especially Danziger Jopenbier, are discussed by P. Mumme (W. Brauer, 1906, 13). This is a top-fermented, highly concentrated beer, which is seen and drunk more abroad than at home where often not even its name is known. The peculiar smell and taste, reminiscent of port wine, the production methods, fermentation and treatment give Jopenbier something characteristic, because it greatly differs from all other top-fermenting beers from and stands alone in its type. - The wort is left to sponataneously ferment. First of all a thick blanket forms on the surface on which all sorts of moulds grow. These blankets in various vats are again very different from each other in appearance and strength, depending on the points of attack the moulds have found. Gradually, the yeast has developed so that it is able to cause fermentation. - The head, which is often so strong that a 20 gram piece won't fall through it, begins to lift itself. - This is the time when the vats must be covered, because after 2 to 3 days a very vigorous fermentation begins. Before the mould layer has risen to avoid it collapsing. The lids have at the front a wide, somewhat overhanging outlet; through this channel, for 8 to 12 days the beer often pushes out large amounts of loose foam, which is collected in barrels or tubs placed below, until the primary fermentation calms and peaceful secondary fermentation takes place. The foam subsides, the ejected, very bitter beer is filled after the lid is lifted, and the tub is left to itself again. Now in long-lasting secondary fermentation and slow clarification take place, during which the sediment settles. - An analysis of Jopenbier revealed :

Alcohol 3.52%
Real extract 45.04%
Apparent extract 43.20%
calculated OG 49.94%
apparent degree of attenuation 13.49%
Real degree of attenuation 9.81%"
"Jahresbericht über die Leistungen der chemischen Technologie (1907)", 1907, pages 352 - 353. (My translation.)

49.94º Plato is 1230º in SG. The finishing gravity is 1195º. That's quite an achievement having an FG higher than the OG of a Scottish 160/- Ale.

What can you say about the fermentation, other than that it sounds scary and disgusting at the same time. I wonder what it was that caused the fermentation. The slime sounds like some sort of bacteria, despite being described as mould. Did Saccharomyces play any part in the fermentation?

From the comparison to port wine, it sounds like there was both some acidity and considerable sweetness in the finished beer. Given the description of the fermentation, it would be a miracle if there were no trace of sourness

http://www.chmielowisko.pl/2015/02/04/jopejskie-czy-to-jeszcze-piwo/

Author:

Bakke Brygg

Boil Size: 58 Litres

Boil Time: 90

Boil Gravity: 1.055

Efficiency: 74

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 18 ° C

Priming Method: Sukkerlake

Priming Amount: 6,5 g sukker/L

Creation Date: 9/13/2014 1:41 PM

Notes: Basert på vinneren i PF under juleølkonkurransen 2012.

Mengden meske- og skyllevann du bør bruke kommer an på utstyret og metoden du brygger med. Som et anslag kan vi si at du kan bruke 40 l meskevann og 30,6 l skyllevann til dette ølet. Noen bryggemaskiner (f.eks. Speidel Braumeister) kan kreve større mengder meskevann. Sjekk alltid manualen på utstyret du bruker.

Mesking på 66 grader i 60 min. Utmesk på 77 grader i 5 min hvis du har mulighet til å øke temperatur i mesken.

Kjøl ned til 17 grader før pitching av gjær.

Gjæring på 18 grader til stormgjæring begynner å avta (typisk etter 3-5 dager). Øk deretter til 20 grader og hold resten av gjæringsperioden (totalt 14 dager). Tørrhumle etter 5 dager.

Gjæralternativer: WLP001, WLP007, WLP051, WLP090, Danstar Nottingham

Author:

MFergBrew

Boil Size: 25 Litres

Boil Time: 75

Boil Gravity: 1.038

Efficiency: 70

Mash Thickness: 3.3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 18 ° C

Priming Method: co2

Priming Amount: N/A

Creation Date: 10/23/2015 12:57 AM

Notes:

Author:

possum

Boil Size: 8 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/14/2013 12:03 AM

Notes: og 1.1, fg 1.02.
52 ibu. 16 srm

or use wyeast 1968.
whirlpool hops 5 minutes before cooling at 0 minutes.
use dark brown sugar
package and age for 8 weeks

Author:

MillerTime

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 72

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 52 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/29/2015 2:25 AM

Notes: Decoct a minimum of 1.5 gal for 25 minutes total boil.

Start with 2 yeast vials. Make a 1.5L starter at 1.04 OG. Siphon off spent beer and add second 2.0L start at 1.04 OG.

Author:

SMMMHAKAN

Boil Size: 30 Litres

Boil Time: 30

Boil Gravity: 1.047

Efficiency: 72

Mash Thickness: 4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/20/2017 7:11 PM

Notes:

Author:

BobTheBrewer

Boil Size: 8 Gallons

Boil Time: 60

Boil Gravity: 1.06

Efficiency: 78

Mash Thickness: 1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/30/2013 12:13 AM

Notes: Multi-step infusion; more work than I like, missed the 158 target, over corrected to 159... which increased pre-boil volume to 12.5 gallons and pushed boil out to 90 minutes to get to post-boil volume.
2 weeks in primary, 4 weeks in secondary @ 55 degrees. FG 1.012

Author:

Jessman52

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.036

Efficiency: 63

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: corn sugar

Priming Amount: 4 oz.

Creation Date: 12/28/2015 10:22 PM

Notes: 1. American Amber (Red) Ale with a sharp bite of citrusy hops.

2. American 2-row pale ale malt, American Crystal 60L and Victory malt rounds out the grain bill. Mash temperatures in the range of 152°F to 154°F create a wort with a nice balance of fermentable and non-fermentable sugars. Sorachi Ace hops add a uniquely lemony bitterness, homegrown Cascade hops add grapefruit flavor and Citra whole leave hops added during the cool down add unique aroma. Yeast: White Labs WLP001(California Ale).

3. Sword of Saint Peter is the first of 12 brews in the Twelve Apostles beer line. Each of the 12 brews are American Amber Ales. Experimentation with water profile, temperature variations including ambient temp., grain bill, hops varieties and yeast strains provide endless opportunity to evolve and improve this beer over the year.

4. Cascade hops Alpha Acid was age adjusted in this recipe since the details of storage and pick date are a known variable.

5. Yeast Lot # 1021675 Manufactured Nov. 23, 2015. QC cell count 1.49e9/ml

Author:

Neeb

Boil Size: 29.5 Litres

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 82

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 25 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/28/2018 12:47 PM

Notes:

Author:

Mellow Fellow

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.033

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/28/2015 9:34 PM

Notes: