Homebrew Beer Recipes | Page 957 | Browse 310,000+ at Brewer's Friend

Author:

Wolf Pack Brewing

Boil Size: 65.58 Litres

Boil Time: 90

Boil Gravity: 1.062

Efficiency: 72

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 19 ° C

Priming Method: co2

Priming Amount: 0.7 bar

Creation Date: 10/26/2021 6:05 AM

Notes: Froth Vape yeast instead of Wyeast 1318 London Ale III

Based on Weldwerk Brewing's Juicy Bits NEIPA, Mujoose is super smooth and juicy.

It won a Gold and Best in Hazy IPA or NEIPA Class at the Christchurch Home Brewers Association Annual Jasecomp IPA Competition on the 27th March 2021, with a BJCP score of 49.5/50.

It won a Gold and Best in Class at the New Zealand Northern Region Amateur Winemakers and Brewers Association Regional Competition on the 10th October 2020, with a BJCP score of 46/50.

https://beerandbrewing.com/weldwerks-brewing-co-juicy-bits-new-england-style-ipa/

Mash at 152°F (67°C) for 60 minutes or until conversion is complete. Add the FWH hops during runoff, immediately after vorlauf, and allow them to steep in the hot wort as the mash is sparged.

Boil for 90 minutes. Whirlpool for 40 minutes (from start to rest) following the hops schedule.

Pitch the yeast and ferment at 67°F (19°C) for 2–3 days, then allow the temperature to rise slowly to 73°F (23°C) by the end of fermentation to ensure full attenuation. When fermentation reaches 1.5–2° Plato from terminal gravity (1.020–1.022), drop temp to 14C and add the first dry-hop addition. About 3 days later do a cone dump and add the second dry-hop addition for another 3 days. Cold crash to 1C and then do another cone dump.
Package at 2.6 volumes of CO2 and consume fresh.

Author:

Boil Size: 29 Litres

Boil Time: 60

Boil Gravity: 1.044

Efficiency: 68

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/1/2021 9:30 PM

Notes:

Author:

stronk

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 75

Mash Thickness: 3.21

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/21/2019 8:04 PM

Notes: Won 1st in New England IPAs category at London LAB Homebrew Competition 2019 (held at Fourpure Brewery), out of 20 entries in category. Notes weren't fulsome in praise, score was only 37/50. Essentially comments were that all elements were present, but it was let down by a muted hop aroma and flavour. Malt flavour and balance were praised. Suggests the samples were a bit old (at about 2 months since brewday), as we noted falling aroma before we prepared the samples to submit.

Hops should be as fresh as you can possibly obtain. If fresher crops are available of other varieties that work in NEIPA (avoid piney, go for fruity/tropical and maybe some citrus) then go for these rather than older crops of the indicated hops.

After fermentation has begun, take extreme care not to introduce oxygen, as this will kill hop aroma very quickly. Take particular care at the second dry hopping step (ideally purge hops with CO2 before quickly adding), during transfers (purge vessels and lines before transferring), during bottling (using a bottling gun with CO2 tank preferred). We keg and we purge the kegs beforehand by filling 100% of volume with sanitiser and then pushing this out with CO2.

Hopstand method to avoid over stewing: cool wort to 85C and insert bag with hops. Stir inside bag to wet them, and try to get a decent amount of wort in the bag to absorb hop flavours. Allow to soak for 20 mins, then remove bag and hops, squeeze out liquid (with ideally sanitised rubber gloves, but wort at 80C+ is still likely to be sanitary) and continue to the remainder of chilling. With a Grainfather, this method requires some additional heating to retain temperature above 80C.

Yeast should be built up with a large starter to avoid over-stressing it. We use 1.8 litres at the expected OG of the wort and pitch this as close as we can to high krausen. If you prefer not to pitch the starter liquid then make the starter earlier and allow it to ferment out, then settle it in the fridge and pour off most of the clear liquid from the top before swirling and pitching the yeast. Do use the indicated strain or another known for NEIPAs, as it makes a big difference.

For dry hops: these are divided into two equal weight charges, as shown in the recipe by the different contact times (11 days vs 7 days - just guidelines). 1st charge should be at high krausen after 36-48 hours (airlock should be bubbling vigorously, otherwise wait until it is). Next charge should be around day 7 after pitching, when primary fermentation has either stopped or significantly wound down. Don't worry too much about air introduction at first dry hop step, but try hard to avoid introducing air at second dry hop. Both dry hops done in primary fermenter and no secondary fermenter employed, to minimise possibility of aeration during transfers.

Fermentation temperature regulated to 20C throughout until chilling. Chill when FG reached, ideally slowly over 3 days and to get to as close to 0C as possible. Hold at this temperature for at least a few days to allow yeast and hop particles to settle - ideally for a couple of weeks or longer to allow it to mellow. Keg or bottle with fairly high carbonation and as little oxygen introduction as possible. Do not fine. Appearance should be very hazy. If you're getting a hop burn flavour, allow it more time to mellow before drinking. This will fade with time, before the aroma does.

Author:

BEERngineer

Boil Size: 25.3 Litres

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/25/2015 12:54 PM

Notes:

Author:

Gregory L

Boil Size: 6.06 Litres

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 32 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/22/2015 5:35 AM

Notes: Who says Singapore doesn't have seasons?!? This Saison was brewed at room temperature - a whopping 30 degrees - during the 2015 HAZE season! This brew will lighten your mood with it's intriguing aroma of grapefruit and taste of Cascade hops.

Ferment at room temperature in Singapore!!!

Author:

Jensenium

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/8/2017 2:30 PM

Notes:

Author:

LlewellynBrewHaus

Boil Size: 7 Gallons

Boil Time: 90

Boil Gravity: 1.041

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 60 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/16/2015 11:24 PM

Notes:

Author:

Toombstone

Boil Size: 28 Litres

Boil Time: 90

Boil Gravity: 1.065

Efficiency: 75

Mash Thickness: 4.201

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 22 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/21/2017 6:11 PM

Notes: Brewed using the 20L Braumeister. This beer is carbonated in the keg & then transferred to bottles using the beer gun.

Author:

SchuBrew

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 50 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/21/2016 9:33 PM

Notes:

Author:

BrooksTriGuy

Boil Size: 1.2 Gallons

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: 0.5

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/24/2016 7:48 PM

Notes:

Author:

ultrashock

Boil Size: 45 Litres

Boil Time: 70

Boil Gravity: 13.8

Efficiency: 77

Mash Thickness: N/A

Sugar Scale: Plato

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 25 ° C

Priming Method: CO2

Priming Amount: N/A

Creation Date: 11/21/2018 6:16 AM

Notes: http://forum.beer-bg.com/viewtopic.php?f=24&t=3944
Before boil: 12P
24.11.18 Brewday
OG: 14P refractometer / 15P zaharomer

03.12.2018
OG: 5,5 refracrometer / 0,6 corrected, 3,5 zaharomer
Transfered to serving kegs on 1BAR and 5C in kegerator.

Author:

Starter Hops

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.032

Efficiency: 66

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/27/2018 11:31 AM

Notes:

Author:

BenMyton

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.053

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/4/2016 3:56 PM

Notes:

Author:

dbrowning

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/3/2014 2:42 AM

Notes: This is by far the best IPA Ive ever made
LOVE the Rye spiciness combined with the Liberty hops
Liberty has become my GO TO hop for ALL Rye beers and most ales in general

I have used S33, Notty and WLP001 in the past getting the best results with Notty
This is the first time using 05

Author:

filthyastronaut

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 59

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/6/2015 2:20 AM

Notes:

Author:

ABogh

Boil Size: 11 Gallons

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 70

Mash Thickness: 1.1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 45 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/3/2015 1:41 AM

Notes:

Author:

BigWoody22

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.069

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.25

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/9/2015 2:49 PM

Notes:

Author:

BrewmasterD

Boil Size: 12.4 Gallons

Boil Time: 60

Boil Gravity: 1.053

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/9/2015 4:04 PM

Notes: -(2) yeast starters required for 10-gallon batch.
-Add lactose during last 15 minutes of boil.
-Want Root Beer? After 7 days, rack to secondary over root beer extract solution.

Author:

khamel

Boil Size: 4 Gallons

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 77

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 75 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/22/2015 8:39 PM

Notes:

Author:

spbrhs07

Boil Size: 1 Gallons

Boil Time: 60

Boil Gravity: 1.075

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/17/2015 7:48 PM

Notes: