All-grain Homebrew Beer Recipes | Page 5183 | Browse 225,000+ at Brewer's Friend

Author:

HoodBrew

Boil Size: 28 Litres

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 70

Mash Thickness: 3.2

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: dextrose

Priming Amount: 174 g

Creation Date: 9/11/2021 1:42 AM

Notes:

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.08

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/9/2024 12:21 PM

Notes:

Author:

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 70

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 4/5/2024 8:28 PM

Notes:

Author:

Boil Size: 18 Litres

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 75

Mash Thickness: 3.13

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/16/2023 6:05 PM

Notes:

Author:

Boil Size: 29.02 Litres

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/28/2023 2:16 AM

Notes:

Author:

IBC

Boil Size: 372 Gallons

Boil Time: 60

Boil Gravity: 13.8

Efficiency: 90

Mash Thickness: 1.5

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 55 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/29/2022 8:20 PM

Notes: Clarity Ferm addition = 158mL per 10bbls

KO at 55 and free rise to 60. Then bump to 65 halfway through.

1st batch - mash temp only hit 151.2. was still too high, added a touch of AA in but it didnt drop any for us. Maybe too much carafoam. Could drop a couple pounds and add elsewhere. Also the centennial was a bit heavy. Could stand to lower that a bit and let the motueka shine a bit more. Also, with cryo we were looking at 2 lbs per barrel. Could drop this to 1.7lbs per barrel. It was a bit aggresssive so says me.

Author:

nhendric

Boil Size: 6.6 Gallons

Boil Time: 180

Boil Gravity: 1.056

Efficiency: 72

Mash Thickness: 1.33

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/9/2022 7:14 PM

Notes: Accidentally doubled hops

Also, thought I had only 5.1 G but nearly filled keg so 5.5G

OG 1.072 (measured and double confirmed)
Fermented down to 1.09
assume 1.87 OG w sugar (calc below) = 10.24%

DME= 46 Gravity pts =9pts per 1lb per G = 9 pts for a 5 G batch
Honey =35 pts per pound per gallon = 7 pts per pound for a 5 G batch
I did 2.2 lb so 14+1.4=15.2 Gravity pts more
1.072+ 15=1.087

Note adding honey did not change #'s here but should have gotten a 1 % boost or so

did and overnight mash with very slow pump

NEXT TIME - turn timer on and have it do mash out without me, I
believe mash out can run longer without issue and it took 45 min to get from 152 to 168.

had about 6.6 or 6.7 G prior to boil, boiled with top on and only got about .25 G in 1st hr
need to boil w top off and likely keep both burners on if winter

Forgot to add sugar to boil thus my OG was not what I was shooting for. Researched it and for this one did honey to fermenter. Don't want to add immediately but after it has started fermenting as infection is minimized at that point, also want to have yeast nice and active to be able to handle extra sugar. Told to add a bit of water to honey and take to around 140 (Rob from Steinbarts), higher destroys something, accidentally did 150 but took it down quick. Add to fermenter and stir a bit with paddle to work it in (sanitize).

Many use corn syrup as yeast can take it easy and its flavor neutral. Can also just use standard sugar, again heat with some later.

From here:
https://www.beercraftr.com/correct-original-gravity/

I’ve got good news for you lad: it’s pretty easy to adjust your OG! Your friend—no, your saviour—is dry malt extract. I always keep a pound or two of light DME extract in the house, just in case I need it. This is what will save your bacon (or your wort, anyway). You’re going to toss a calculated amount into the wort to boost your gravity up to your target range.

Let’s first cover some basic math. Full credit goes to Brad Smith for these formulas.

Calculate the difference between your target OG and what you ended up with. Multiple that number by 1000 to get a points reading. For example, if your target OG is 1.060 but you’re sitting at 1.035, you’d end up with 25 points—(1.060-1.035) x 1000 = 25 points.
Alright, so now you know, you need to raise your gravity by 25 points per gallon. What does that mean? It means you need to add 25 points/gallon of dry malt extract. If you’re brewing one of my recipes, I aim for a final yeild of 1.3 gallons. So we take 25 x 1.3 = 32.5. We need to add 32.5 points to our wort in this example.
DME has a potential of 1.046, which means it contributes 46 points/lb added. So, we just need to take the 32.5 points and divide it by 46 to get 0.71 lbs DME to add to the wort.
WHEN DO YOU ADD THE DME?
There are two distinct opportunities in the brew-day process for you to add the DME. If you want my advice, take Option B.

Option A (near the end of the boil): The formula I’ve outlined above assumes you’re measuring your OG near, or at the end of your boil. I’ve kept the math simple by assuming your post-boil volume is 1 gallon. However, my recipes are designed to have a post-boil volume of 1.3 gallons, so you would need to adjust the math accordingly. But, by designing my recipes to have a bit more wort than needed, it gives you the flexibility to correct your gravity near the end of the boil. Why? Because if you need to add 10 minutes to the boil, to sanitize the DME you just added, you’ll still have enough wort to transfer to the fermentor. Of course, this means you’re extending the boil, which could impact your IBUs. But at this point, I’d rather have the right OG and risk a slightly more bitter beer than planned. If you don’t want to mess with your IBUs, you could take the gravity reading with 15 minutes to go in the boil, tossing in the DME for the final 10.

Preferable: Option B (before the boil): Ideally, you don’t want to wait until the end of the boil to make corrections. This is why it’s important to measure your gravity reading after the mash, before the boil. Here’s how this works:

You first need to calculate the total gravity points you’re aiming for. Assuming you’re using one of my recipes which have post-boil volumes of 1.3 gallons, and assuming our recipe has a target OG of 1.065, you know that our beer needs to have 85 gravity points to hit our mark (1.3 x 65).
So, your wort is ready for the boil, and you take a gravity reading and it comes in at 1.035. Now you need to multiply those 35 points by the pre-boil volume in your kettle. Assuming you have 2.2 gallons in the kettle, you can determine the total gravity in your kettle: 2.2 x 35 = 77 points.
Now we know that we’re just off the mark: 85 (our target) minus 77 (our current gravity) = 8 points.
From here, we can assess how much DME to add. Remembering from above that DME has a potential of 46 points per lb, we divide 8 by 46 to get 0.17 lbs DME to add to the wort.

Author:

TWS

Boil Size: 6.83 Gallons

Boil Time: 90

Boil Gravity: 1.041

Efficiency: 70

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 50 ° F

Priming Method: co2

Priming Amount: 23.72 psi

Creation Date: 8/12/2022 3:07 AM

Notes: 2 tsp gypsum to attain pH 5.6

Author:

Boil Size: 2340 Litres

Boil Time: 60

Boil Gravity: 1.014

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/25/2022 7:45 PM

Notes:

Author:

137

Boil Size: 260 Litres

Boil Time: 60

Boil Gravity: 1.067

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/24/2021 9:18 AM

Notes:

Author:

Therealmccoy3

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/16/2015 6:44 PM

Notes: carb to 2.75 vol/CO2

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.055

Efficiency: 75

Mash Thickness: 1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 8/25/2021 8:06 AM

Notes:

Author:

Chris Ham

Boil Size: 23 Gallons

Boil Time: 60

Boil Gravity: 1.076

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/9/2021 1:11 AM

Notes:

Author:

Boil Size: 26 Litres

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 65

Mash Thickness: 3.14

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/16/2020 6:29 AM

Notes:

Author:

Bernhard

Boil Size: 60 Litres

Boil Time: 90

Boil Gravity: 1.059

Efficiency: 60

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 15 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/28/2020 11:42 PM

Notes:

Author:

magister factotum

Boil Size: 16 Litres

Boil Time: 60

Boil Gravity: 1.032

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/10/2019 8:44 AM

Notes: Moj recept, pilsner.
JEČMENI SLAD PILSNER
SAZZ 3,5%
Pivo je u svim granicama normale za pilsner, boja, jacina, gorcina.
Moze biti manje gorce i slabije a jaca boja.

Author:

BrewChef

Boil Size: 71 Litres

Boil Time: 90

Boil Gravity: 1.039

Efficiency: 77

Mash Thickness: 2.8

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 10 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/10/2019 9:52 PM

Notes: 1 pakke gjær, 2.2L starter, gjæres på 10c i 18 dager, deretter 3 dager på 15c.

CC i 24 timer, overfør til fat

Author:

Iankost

Boil Size: 32.2 Litres

Boil Time: 90

Boil Gravity: 1.038

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/9/2018 11:56 PM

Notes: Fermented under pressure - 14psi

Author:

501

Boil Size: 80 Litres

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 75

Mash Thickness: 2.35

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/15/2017 3:56 AM

Notes: OG 1062 FG1010

Author:

Boil Size: 15 Gallons

Boil Time: 75

Boil Gravity: 1.061

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/10/2015 12:25 PM

Notes: