All-grain Homebrew Beer Recipes | Page 774 | Browse 230,000+ at Brewer's Friend

Author:

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.078

Efficiency: 72

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/28/2017 1:17 AM

Notes:

Author:

minosekibeer

Boil Size: 329.18 Litres

Boil Time: 60

Boil Gravity: 1.057

Efficiency: 80

Mash Thickness: 3.65

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 23 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/28/2023 1:03 PM

Notes:

Author:

RustyBarrelHomebrewing

Boil Size: 10 Gallons

Boil Time: 180

Boil Gravity: 1.053

Efficiency: 50

Mash Thickness: 1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 2/18/2022 4:16 PM

Notes: ===============================
3/26/2023
unclear on the notes below. if there was DME added i would estimate 10-11% otherwise probably 9.5%. the body is pretty thin. main issue with this beer is it stayed in the oak barrel way too long it just tastes like harsh wood. shouldve saved some on the side without to wood to evaluate separately.

===============================
???/2022
Reading byo session to imperial article about imperial stou they suggest using brown sugar to get up to gravity I’d consider that. Also they mentioned double mash which I should def do it should def help since last time mash tun was maxed out and really too thick
===============================
5/25/2022
majore lapse in note taking. unclear the OG or abv of this beer. somewhere between 9.5 and 12% smh. The OG on brew day was 1095. however there was 3 lb DME added to the recipe separate from what was already in the grain bill making me think i added it later. correcting the efficiency to 55% for the 1095 OG then adding the DME gives 1.116 down to 1020 making it 12.5% not considering the whiskey.

before today the efficiency was set at 50% not sure if that was corrected after brewday? not sure. leaving it there gives us 1.109 down to 1020 for 11.6%.

maybe i put the 3lb in the recipe just to calculate what it would be but never actually put it in? if thats the case it would be 1095 down to 1020 for 9.4% abv

===============================
2/28/2022
Measured 1020 FG ...could that be right? That would be 80% attenuation for 11.6%. Its pretty brown and not black. Maybe there is more volume in there than I have here in recipe

===============================
2/18/2022
considering adding LME to boost grav...(thinking LME instead of DME might be easier to work with),...adjusted volume and turned up the projected attenuation

===============================
2/16/2022
last minute pulling out the oats. worried about stuck mash and wont be able to babysit....

===============================
2/15/2022
got water report updating to that, looks like ph will be a little high so adding a little phosphoric acid.

thinking about mash. G40 is 11 gal in mash so we'll go 1 qt/lb mash thickness on 28 lbs grain. adding a line for DME in case we go to that later.

looks like it will be a little over 7 gallons strike water and 5 gallons sparge water.

pitching 1 jar of RVA 101 into almost a gallon of 1040 starter wort 2 days before. no stir plate.

===============================
2/8/2022
wondering if this will all fit in the GF. could possibly do it all in the cooler or split between the two.

thinking about setting this up early in the day to mash during work and have it boil for 3 hours while i do dinner/bedtimes. setup the GF in the driveway if possible - will be a lot of steam.

see big beer schedule https://docs.google.com/spreadsheets/d/1gaWvnYevKP9I8mmRzW54MrnqfOVuWlsOEhzyezW-kaY/edit#gid=0

===============================
1/16/2022
adding notes to sparge strategy to try to achieve decent efficiency.
adjusting yeast - use rva 132 plus 3L starter

===============================
12/1/2021
* adding oats and removing DME for now.
** adjusting recipe for 65% efficiency and trying to hit 10%abv counting the oats as zero points contribution.
** probably want to use a grain bag if possible
** remember to take preboil gravity, and throughout. maybe last 10 minutes of the boil take gravity and decide whether or not to throw in some DME
* adjusting to 2 hour boil
* will plan to double mash.
** not sure the plan for that because g40 will be maxed out at 10g preboil and thats without grain
** ...maybe just take the first mash out and put the 2nd one in. then take it out and sparge to get to volume? will be leaving behind sugars in first mash...
** ...alternatively sparge both mashes. after first mash and sparge and mash is pulled, should have about 6-7 gallons, that should leave enough space to drop the 2nd mash in. when that comes out, i would think we'd then have 5-6 gallons left. and will have to sparge to get the rest of the way. 2nd mash will have absorbed some of the 1st mash wort so it should probably be richer in the end for more sparging?
===============================
11/3/2021

RECIPE REBUILD
* reducing roasted barley from 1.25 down to 0.5
* reducing black patent from 1.25 to 0.5
** wanted to use less but keeping it here to get within SRM for style
* adding 1lb 120L for flavor and body
* get rid of the fricking kviek!!! change to london3
* adjusting efficiency to 70% :
** going to 2 hour boil
** im now on G40 which has been doing 2gal/hr so we'll go from 10g down to 6 during a 2 hour boil

for yeast would need rva 132 200B pack and a 2L starter or equivalent

todo :
* need to figure out yeast requirements (packs, starters...)
* consider oats
** its 21 lb grain...consider double mash
** ...if double mash consider more base grain and less DME
** any changes to grain bill, try to keep abv at 10%...

===============================
11/2/2021
this brew came out tasting funky again. submitted to JRHB dominion cup they said umami and i think that is correct. This is the third time this has happened to varying degrees, I previously thought it might be bad ingredients but I think hothead and/or too much roasted malt is to blame...

===============================
5/1/21
Not sure what happened only came to 1.100 OG even after the 2 hour boil and DMe. It was 1075 before the DME.

Last minute adding 2 lb base malt and reducing DME. Gonna play by ear how much dme to add
===============================
4/30/21
booting this back up for big brew day with ryan tomorrow. we are doing two 5 gallon mash sparges into my 15 gallon kettle to boil all at once so that could change things. im expecting better efficiency even without the dry malt extract. plan to boil 90 minutes, check gravity, then potentially add 3 or 6 lbs total DME for the 10 gallon batch. i think we will need 14 gallons to start, boil down to 11 or 11.5, leave 1 behind for trub.
===============================
5/25/2020
FG 1.036 (cold sample)
appears the starter wasnt necessary and didnt do anything anyway. Hit an official 10%
===============================
5/11/2020
SG 1.036 - made a 2x starter from a new hothead pack and tossed half of it into the batch.
===============================
5/2/2020
SG 1.041
===============================
4/27/2020
SG 1.045 fermented like crazy the first couple days just off the kveik pack no starter.
===============================
4/16/2020
brew day. Idk what just happened I hit 1.112 and high volume really, couldnt tell exact because of the foam but maybe it was only 5. I guess eff prob goes up if u add a lot of DME. This could be disaster or awesome
===============================
4/15/2020
just changing the batch size from 6.5 down to 5.5 and taking the 2row down from 15lb to 12lb to still arrive at 10%. considering using kviek yeast for this....

===============================
3/24/2020
revamping this for another attempt. shamefully adding dme and predicting over 70 eff to land at 10%. other than that no real changes. worried it might be too bitter hoppy? would like to NOT split the batch and just do 2 vanilla beans. bourbon oak would be nice but i feel that the failure of the last batch was from trying to do too much at once.
===============================
9/30/19
brewed this on the road, came out with more than 6 gallons at 1.080 which was a mistake shouldve boiled longer. also used some old hops which may be putting off strange flavors.

9/23/19
base recipe is Stone RIS clone found in byo magazine. recipe is scant, and doesnt really add up : https://byo.com/recipe/stone-imperial-russian-stout-clone/ . posted recipe is for 65% efficiency so actually less efficient than my system but i added a pound more base malt anyway to try to get over 10%abv. yeast is a little unclear wlp002 listed 65-70% attenuation so we will have to be perfect and hit 70% to get over 10%abv. but then this amounts to 1030 FG, recipe is listed at 1020. could use wlp007 english dry ale if hittin FG was a concern but i think extra sweetness in this beer is going to be ok.

==========MISC NOTES=============
mona lisa stout

ORANGE
austin homebrew
http://austinhomebrew.com/assets/images/RCPPDF/09611.pdf
1/4oz bitter
1/2oz sweet

https://brewgr.com/recipe/59297/chocolate-orange-stout-oatmeal-stout-recipe
fresh orange peel and juice
(essentially a whole orange)

mrbeer
https://www.mrbeer.com/barleys-brew-chocolate-orange-stout
4oz bakers unsweetened chocolate
2 medium oranges
take off the skins but not too much pith
they soak skins in 1/2 cup vodka, adding allof it
maybe use a thin glass so the vodka covers more

final thoughts
use the brewers peel sweet and bitter, soak in vodka with vanilla bean
use thin glass
add the whole thing
optional : plus the orange juice

CHERRY
austin homebrew
http://austinhomebrew.com/assets/images/RCPPDF/02071.pdf
cherry flavoring

AHA
https://www.homebrewersassociation.org/homebrew-recipe/choc-full-o-cherry-porter/
frozen sour cherries

HBT
https://www.homebrewtalk.com/forum/threads/chocolate-cherry-stout.326884/
cherry juice concentrate
might be better in reducing sugar and other flavors....

final stand
a) i guess prob just use frozen cherries. not sour! sweet/dark any other kind than sour
b) cherry juice concentrate? how sour?
Dark cherries. Aha recipe calls for 5 to 10 lb per 10 gal batch. I think I will go with 5. For split batch 3.333

Author:

Wolf Pack Brewing

Boil Size: 29.77 Litres

Boil Time: 90

Boil Gravity: 1.059

Efficiency: 75

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 20 ° C

Priming Method: co2

Priming Amount: 1.64 bar

Creation Date: 6/15/2021 8:50 PM

Notes: https://beerandbrewing.com/recipe-oconnor-darth-malt-imperial-red-ipa/

DIRECTIONS
Mill the grains and mash at 153°F (67°C) for 60 minutes. Lauter, sparge, and top up as necessary to get about 6.5 gallons (25 liters) of wort—or more, depending on your evaporation rate. Stir in the brown sugar and boil for 60 minutes, following the hops schedule. At flameout, stir 5 minutes to conduct a whirlpool, add whirlpool hops, and allow to rest for 20 minutes. Chill to 68°F (20°C), aerate well, and pitch plenty of healthy yeast. Ferment at 70°F (21°C). When the beer reaches terminal gravity, add dry hops. After 5 days, cold crash, package, and carbonate.

Author:

jgt

Boil Size: 23 Gallons

Boil Time: 60

Boil Gravity: 1.052

Efficiency: 82

Mash Thickness: 2

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 69 ° F

Priming Method: co2

Priming Amount: 21.36 psi

Creation Date: 10/17/2019 11:36 PM

Notes: add 1 Servomyces tablet for yeast,

secondary fermentation 69 degrees,

Author:

Mpier

Boil Size: 18 Gallons

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/18/2019 12:06 PM

Notes:

Author:

Rodwell66

Boil Size: 41 Gallons

Boil Time: 120

Boil Gravity: 1.085

Efficiency: 70

Mash Thickness: 1.15

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/29/2019 12:48 AM

Notes: Brew day April 6.

American Crystal is 33L Mecca Opal 44
Mecca Opal 44-12lbs
Simpson Medium 50-60L-6lbs
Simpson 70-80-3lbs
TF Pale Choc-9lbs
Midnight wheat-6lbs
Patagonia Black Pearl-6lbs
Flaked Oats-6lbs
Lactose-6lbs

Wanted 158 mash. Hit a bit low.

Mash in went well, heated water to 178, trying to hit 158. Hit more like 152, recirculated through herms to bring it up, got to about 155 after 20 minutes.

Mash pH 5.25. Took another mash pH and it was like 5.15. Not sure what's going on, I didn't add any acid knowing there was a lot of dark malt in there, probably should have raised the pH a bit knowing the HCO was low from the 70% RO water.

Boil Gravity high. Real high so we decided to only boil for 60 minutes.
OG: 29 brix, 1.124 This is crazy high. When I do the efficiency adjustment to get it this high it means we have 81% efficiency. How is this possible, our efficiencies have been much lower on this system, and this malt bill is only 58% base malts! Some other notes: there was almost 2.5 gallons extra run-off. I'm wondering about the water calculations, it seems the last couple batches we have had too much. I made sure not to add a gallon of water to any of the starting water volumes this times like I have in the past. One caveat: I forgot to look at the volume of the HLT before I went to put the 14 gallons of sparge in the mash tun. I THINK it was 38, because I think I kept both volumes of water the same (original strike water and the sparge water). Also, I forgot to look at the ending kettle volume just before we transferred to the fermenter, but I do remember yelling to Erik that it was 35 gallons with just a few minutes of boil left, wondering if we should transfer that much or leave a few gallons behind. I know we started with right at 40 gallons before boil, so a 5 gallon / hr. boil is a pretty vigorous one.

Pitched yeast around 5pm. This is the yeast we harvested from the Scottish Ale. The yeast we used in the Scottish Ale was Omega British 1, which is their version of 007. We had about 3 L between a few containers and then when it had all settled, a very thick slurry of about 1.6 L.

So...No action Sunday morning. No action in the afternoon. Erik came over and we stirred it with the long handled mash paddle. Very strange and concerning. Then, we did filled a hydrometer and did a reading. 1.090. WHAT??? Did a refractometer and 23.2 Brix, = 1.097. Both are WAAAYYY low. So weird. Were all of our refractometer readings way off yesterday? So weird....what to believe.

4-16-19. Once it took off, it went great. Once it got rolling I adjusted temp to around 63-64, that's where it was at during vigorous fermentation. Once it slowed down after a few days, I raised it a bit. It's been fermented at 68 last couple days, bubbles now about 15 seconds. Gravity tonight: 1.047. Appearance is real thick, chocolatey. Tastes super chocolatey! There's a lot of yeast in suspension yet, but still tastes like chocolate!

5-9-19. I have been chilling it down, it's been at 35 for the last couple days, gonna keg it this weekend. FG is 1.040 Tasting a lot of dark chocolate. Not the "sweetest" beer.

Author:

Andy Smith

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.052

Efficiency: 75

Mash Thickness: 1.3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/26/2019 6:44 PM

Notes:

Author:

knuckFuckler

Boil Size: 27 Litres

Boil Time: 90

Boil Gravity: 1.027

Efficiency: 65

Mash Thickness: 3.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/26/2018 11:38 AM

Notes: Ended up with 22 l in fermenter at 1038.

took an hour to sparge.

FG 1009 fucken smacked it dead on cunt! Pure fluke of course given I ended up with 3l more beer than I should :)

So I think I am not getting the boil loss I expect, so my robobrew has shit boilability.

So if I dropped my water and got the right amount, it would be way over gravity. If I do that AND reduce my grain bill will I end up with exactly the same beer?

Anyway, 3.9% and promising pre carbonation.

Author:

Aleworks

Boil Size: 25 Litres

Boil Time: 60

Boil Gravity: 1.075

Efficiency: 75

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 18 ° C

Priming Method: dextrose

Priming Amount: 120

Creation Date: 9/15/2018 7:26 PM

Notes:

Author:

Diamond-Geezer

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/13/2014 2:45 AM

Notes:

Author:

Boil Size: 8 Gallons

Boil Time: 75

Boil Gravity: 1.06

Efficiency: 75

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 55 ° F

Priming Method: corn Sugar

Priming Amount: 5 oz

Creation Date: 5/25/2017 1:46 AM

Notes:

Author:

Birarzu Brewery

Boil Size: 19 Litres

Boil Time: 90

Boil Gravity: 1.041

Efficiency: 65

Mash Thickness: 4

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/18/2016 7:26 AM

Notes:

Author:

MyNameIsGram

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.058

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/20/2016 3:14 PM

Notes:

Author:

Genus Brewing

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/7/2015 9:23 PM

Notes: Chit Malt is the Dextrin Malt.

The hops in this recipe is just based on what is on hand. The amount of hops per addition should stay around the same (the dry hop could be bigger,) but hops like Columbus and Citra go great with the Belma profile. I like to use Columbus in a major quantity in the dry hop and whirlpool, and Citra in a minor role for any addition from the 20min on.

Author:

Kirkbray

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 60

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/2/2015 4:28 PM

Notes:

Author:

Vrdzygner

Boil Size: 8 Gallons

Boil Time: 90

Boil Gravity: 1.039

Efficiency: 70

Mash Thickness: 0.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/19/2015 3:12 AM

Notes:

Author:

TheSaintz

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.018

Efficiency: 35

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/1/2015 4:21 AM

Notes:

Author:

atarev

Boil Size: 7.7 Gallons

Boil Time: 90

Boil Gravity: 1.07

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/14/2015 9:12 PM

Notes:

Author:

Slide 11

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.052

Efficiency: 65

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: force carbonation

Priming Amount: N/A

Creation Date: 3/19/2015 2:22 PM

Notes: