Extract Homebrew Beer Recipes | Page 205 | Browse 30,000+ at Brewer's Friend

Author:

mvmyers126

Boil Size: 0.9 Gallons

Boil Time: 60

Boil Gravity: 1.061

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/20/2014 7:41 PM

Notes:

Author:

Genus Brewing

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.087

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 61 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/30/2017 1:34 AM

Notes:

Author:

sideofpotatos

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.091

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.0

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/7/2015 6:27 PM

Notes:

Author:

Jodi

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.102

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: Sugar

Priming Amount: 5 oz

Creation Date: 10/18/2015 12:35 AM

Notes:

Author:

frodus

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.075

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: 23.72 psi

Creation Date: 1/29/2020 10:46 PM

Notes: Just as the maypole is used to celebrate the coming of the warm season, this recipe also honors the ending of winter and the short, dark days. Maypole Maibock is brewed in the tradition of the famously malty and flavorful beers historically brewed in winter and then consumed in May coinciding with the return of spring and summer. Packed with delicious fresh, clean pilsner malt flavor and layered with a smattering of Munich malt, this lager is then just bittered enough to balance the malt sweetness and fermented with a clean, crisp, and relatively attenuative classic German lager strain. The result is a deep golden beer with a dense and lasting white foam head, and a complex flavor profile with moderately high alcohol content.

Author:

Connor007

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.149

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: 14.26 psi

Creation Date: 12/10/2019 11:02 PM

Notes:

Author:

Brewer Barry

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.101

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/22/2017 5:25 PM

Notes: 1. Heat 2.5 gallons of water to approximately 160F
2. Steep grains while holding temperature constant (25 mins)
3. Remove bag and bring to a soft boil
4. Add Sterling hops and 2.75 lbs of light malt extract (60 mins)
5. Add .75 lbs of brown sugar (40 mins)
6. Add .25 lbs of honey and amber malt extract (25 mins)
7. Add williamette hops (15 mins)
8. Add 2.75 lbs of light malt extract (10 mins)
9. Once boil is complete chill wort to approximatly 70F
10. Add water to bring to 5.5 gallons
11. Transfer to primary fermenter, pitch yeast, and shake fermenter for 5 mins to oxidate.
12. Add Fuggles hops in cheese cloth bag and dry hop for 3 days

Author:

wmschm

Boil Size: 2.5 Gallons

Boil Time: 30

Boil Gravity: N/A

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/21/2012 8:23 PM

Notes:

Author:

csandvik

Boil Size: 6.25 Gallons

Boil Time: 60

Boil Gravity: 1.069

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 72 ° F

Priming Method: CornSugar

Priming Amount: 2.5

Creation Date: 3/24/2016 12:33 AM

Notes:

Author:

RyDog

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.075

Efficiency: 100

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/6/2015 5:59 AM

Notes: 3 weeks in fermenter
Unfortunately it barely carbonated, it came out quite sweet.

Author:

CoCo2

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.095

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/23/2016 11:39 AM

Notes:

Author:

okiemurse

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 70 ° F

Priming Method: priming sugar

Priming Amount: 5 oz

Creation Date: 5/12/2016 6:08 PM

Notes: Official NORTHERN BREWER Instructional Document
The perfect pint after a hard day’s work, Gaarden Hoe is
an ode to the historic and refreshing Belgian wit. Classic
wheat is expertly tilled into a traditional pilsner malt bill
and modest, grounded hop profile. Coriander and bitter
orange peel offer slightly tart and citrusy undertones to
quench even the most parched palate.
O.G: 1.049 READY: 6 WEEKS
1–2 weeks primary, 2 weeks secondary,
1–2 weeks bottle conditioning
KIT INVENTORY:
MAILLARD MALTSTM
EXTRACTS & OTHER FERMENTABLES
- 4 lbs Wheat DME (60 min addition)
- 2 lbs Pilsen DME (15 min late addition)
HOPTIMUS REXTM
PREMIUM HOPS
& OTHER FLAVORINGS
- 1 oz Saaz (60 min)
- 1 oz Saaz (15 min)
- 1 oz Bitter Orange Peel (5 min)
- 1 oz Coriander (5 min)
** 6-8# frozen strawberries (secondary)
** strawberry extract (secondary, to taste)
YEAST
- DRY YEAST (DEFAULT): Fermentis Safbrew T-58. Optimum
temp: 59 - 75F.
- LIQUID YEAST OPTION (RECOMMENDED): Wyeast
3944 Belgian Wit. Optimum temp: 62-75F. White Labs WLP400
Belgian Wit Ale. Optimum temp: 67-74F
PRIMING SUGAR
- 5 oz Priming Sugar (save for Bottling Day)
These simple instructions are basic brewing procedures
for this Northern Brewer extract beer kit; please refer
to your starter kit instructions for specific instructions
on use of equipment and common procedures such as
siphoning, sanitizing, bottling, etc.
For more detailed extract brewing instructions, please
visit www.northernbrewer.com
BEFORE YOU BEGIN ...
MINIMUM REQUIREMENTS
- Homebrewing starter kit for brewing 5 gallon batches
- Boiling kettle of at least 3.5 gallons capacity
- A 5 gallon glass carboy, with bung and airlock, to use as a
secondary fermenter
- Approximately two cases of either 12 oz or 22 oz pry-off
style beer bottles
UNPACK THE KIT
- Refrigerate the yeast upon arrival
- Locate the Kit Inventory (above) – this is the recipe for your
beer, so keep it handy
- Doublecheck the box contents vs. the Kit Inventory
- Contact us immediately if you have any
questions or concerns!
PROCEDURE
A FEW DAYS BEFORE BREWING DAY
1. Remove the liquid Wyeast pack from the refrigerator,
and “smack” as shown on the back of the yeast package.
Leave it in a warm place (70–80° F) to incubate until the
pack begins to inflate. Allow at least 3 hours for inflation;
some packs may take up to several days to show inflation.
Do not brew with inactive yeast — we can replace the
yeast, but not a batch that fails to ferment properly. If
you are using dry yeast, no action is needed.
ON BREWING DAY
2. Collect and heat 2.5 gallons of water.
3. Bring to a boil and add 4 lbs Wheat DME. Remove the
kettle from the burner and stir in the Wheat DME.
4. Return wort to boil. The mixture is now called “wort”,
the brewer’s term for unfermented beer.
- Add 1 oz Saaz hops, and boil for 60 minutes.
- Add 2 lbs Pilsen DME and 1 oz Saaz 15 minutes before the
end of the boil.
- Add 1 oz Coriander and 1 oz Bitter Orange Peel 5 minutes
before the end of the boil. You may crush the seeds before
adding if you wish.
5. Cool the wort. When the 60-minute boil is finished,
cool the wort to approximately 100° F as rapidly as
possible. Use a wort chiller, or put the kettle in an ice
bath in your sink.
6. Sanitize fermenting equipment and yeast pack. While
the wort cools, sanitize the fermenting equipment –
fermenter, lid or stopper, fermentation lock, funnel, etc –
along with the yeast pack and a pair of scissors.
7. Fill primary fermenter with 2 gallons of cold water,
then pour in the cooled wort. Leave any thick sludge in
the bottom of the kettle.
8. Add more cold water as needed to bring the
volume to 5 gallons.
9. Aerate the wort. Seal the fermenter and rock back
and forth to splash for a few minutes, or use an aeration
system and diffusion stone.
10. OPTIONAL: if you have our Mad Brewer Upgrade or
Gravity Testing kits, measure specific gravity of the wort
with a hydrometer and record.
11. Add yeast once the temperature of the wort is 78°F or
lower (not warm to the touch). Use the sanitized scissors
to cut off a corner of the yeast pack, and carefully pour
the yeast into the primary fermenter.
12. Seal the fermenter. Add approximately 1 tablespoon of
water to the sanitized fermentation lock. Insert the lock
into rubber stopper or lid, and seal the fermenter.
13. Move the fermenter to a warm, dark, quiet spot until
fermentation begins.
GAARDEN HOE
BEYOND BREWING DAY, WEEKS 1–2
14. Active fermentation begins. Within approximately
48 hours of Brewing Day, active fermentation will
begin – there will be a cap of foam on the surface of
the beer, and you may see bubbles come through the
fermentation lock.
15. Active fermentation ends. Approximately 1–2 weeks
after brewing day, active fermentation will end: the cap
of foam falls back into the new beer, bubbling in the
fermentation lock slows down or stops.
16. Transfer beer to secondary fermenter. Sanitize
siphoning equipment and an airlock and carboy bung or
stopper. Siphon the beer from the primary fermenter into
the secondary.
BEYOND BREWING DAY—
SECONDARY FERMENTATION
17. Secondary fermentation. Allow the beer to condition in
the secondary fermenter for 2 weeks before proceeding
with the next step. Timing now is somewhat flexible.
BOTTLING DAY—ABOUT 4 WEEKS
AFTER BREWING DAY
18. Sanitize siphoning and bottling equipment.
19. Mix a priming solution (a measured amount of sugar
dissolved in water to carbonate the bottled beer) of 2/3
cup priming sugar in 16 oz water. Bring the solution to a
boil and pour into the bottling bucket.
20. Siphon beer into bottling bucket and mix with priming
solution. Stir gently to mix—don’t splash.
21. Fill and cap bottles.
1–2 WEEKS AFTER BOTTLING DAY
22. Condition bottles at room temperature for 1–2 weeks.
After this point, the bottles can be stored cool or cold.
23. Serving. Pour into a clean glass, being careful to leave
the layer of sediment at the bottom of the bottle. Cheers!

Author:

Blue Tick

Boil Size: 5.5 Gallons

Boil Time: 60

Boil Gravity: 1.058

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/20/2016 6:36 PM

Notes:

Author:

RyDog

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.028

Efficiency: 55

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 72 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/28/2015 12:58 AM

Notes:

Author:

trailerbrew

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.091

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: Corn Sugar

Priming Amount: 0.75 Cup

Creation Date: 1/17/2015 2:45 PM

Notes: Steep the 3 crushed grains in 3 gallons of water at 150º for 30 minutes. Remove grains from wort, add 1 cup malt syrup bring to a boil. Add Sorachi (bittering) hops, Irish moss and boil for 60 minutes. Add the Hallertaur aroma hops and Lemon peel for the last 10 minutes of the boil. Add the remaining fermentables at the end of boil, let sanitize for 10 min.

When done with sanitization period, add wort to 2 gallons cool water in a sanitary fermenter, and top off with cool water to 5.5 gallons. Cool the wort to 72 - 75º , aerate the beer and pitch your yeast. Allow the beer to cool over the next few hours to 68º-70º, and hold at these cooler temperatures until the yeast has fermented completely. Bottle your beer, age for 2-3 weeks and Enjoy!

Author:

ForeverBrewing

Boil Size: 10 Litres

Boil Time: 45

Boil Gravity: 1.032

Efficiency: 40

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/28/2014 4:45 PM

Notes:

Author:

Andy Ruhland

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/4/2011 4:08 PM

Notes: Steep 1lb Pale Malt in 2.5-3 gallons at 155 degrees. I used a wet hop ratio of 5:1 for my homegrown Chinook hops. IBU's hard to determine with homegrown hops but it did come out with a nice hoppy presence. Fresh hops were definitely noticeable.

Author:

SayWhenBrewing

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.083

Efficiency: 79

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 67 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/1/2014 4:23 PM

Notes:

Author:

Zho

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.067

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.0

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/26/2014 7:55 PM

Notes:

Author:

Tony ABV

Boil Size: 2.5 Gallons

Boil Time: 60

Boil Gravity: 1.121

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 1.25

Primary Temp: 71 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/27/2017 5:20 PM

Notes: