Biab Homebrew Beer Recipes | Page 2070 | Browse 50,000+ at Brewer's Friend

Author:

JayOh

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.039

Efficiency: 90

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/11/2020 5:38 PM

Notes: Whirlpool hops added at 165 and covered for 10 min, left open for 5 minutes. then further cooled.

Author:

PureBrewing

Boil Size: 11 Litres

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 62

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/21/2024 11:19 AM

Notes:

Author:

HeroOfCanton81

Boil Size: 7.54 Gallons

Boil Time: 90

Boil Gravity: 1.041

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/10/2024 1:41 PM

Notes:

Author:

Boil Size: 17.85 Litres

Boil Time: 90

Boil Gravity: 1.005

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/26/2022 6:11 AM

Notes:

Author:

Boil Size: 26.69 Litres

Boil Time: 60

Boil Gravity: N/A

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: sucrose

Priming Amount: N/A

Creation Date: 8/7/2021 6:23 AM

Notes: https://www.homebrewtalk.com/threads/liberty-brewing-yakima-monster-clone-recipe.541735/

Author:

Niko&Izzy’sMom

Boil Size: 2.54 Gallons

Boil Time: 60

Boil Gravity: 1.029

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/24/2021 8:18 PM

Notes: Great beer, but IRM estimate innaccurate every time I've brewed this - irl generally 8-10.

Author:

Tommy61

Boil Size: 5 Gallons

Boil Time: 60

Boil Gravity: 1.08

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/8/2021 6:13 PM

Notes:

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: 9.56 psi

Creation Date: 12/30/2020 3:21 AM

Notes:

Author:

SBrgy

Boil Size: 2.85 Gallons

Boil Time: 50

Boil Gravity: 1.032

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: dextrose

Priming Amount: 4.5 oz

Creation Date: 12/20/2020 3:24 AM

Notes: ----------------------------MASH----------------------------

1.) Measure out your water. If you’re using city water, it’s best to run it slowly (about 1 gal/min) through a carbon filter while you’re measuring.

2.) Heat water up to 2-5F more than your strike temperature to compensate for temperature loss while transferring to the mash tun. To minimize temperature loss, try warming up your mash tun by filling it with hot water and leaving it sealed for a few minutes before transferring.

3.) Slowly add your grain, constantly stirring to maximize exposure.

4.) Check that your temperature is on target and seal your mash tun. Once completely stirred in, your
mash should have roughly the consistency of watery oatmeal.

Temperature corrections: always aim a couple of degrees higher than your target (but always lower than 168F). It’s much easier to bring your temperature down a few degrees by stirring in small handfuls of ice (2 cubes is approximately -1F) than having to bring it up by adding boiling hot water a quart at a time.

----------------------------LAUTER AND SPARGE----------------------------

1.) Heat up your sparge water to 2-5F higher than desired sparge temperature. Then, transfer the water to the hot liquor tank (HLT) and carefully place your HLT in position above the mash tun.

2.) Position your kettle below the mash tun to prepare for the lauter.

3.) Recirculate your mash. Partially open the valve on your mash tun so that a moderate stream of
sweet wort comes out. Use 2 pitchers or large measuring cups to catch this stream; you will notice a lot of small particles floating in the wort for the first couple minutes. As each pitcher fills, replace it with the empty and gently pour the full pitcher back into the mash tun. Continue doing this until you your wort is free of particulates.

4.) Begin lautering into the kettle. Set up sparge arm above grain bed and open valve on HLT partway to begin sparge. Adjust flow rates out of your mash tun and HLT to maintain 1 inch or so of water above the grain bed. Continue until you reach your target boil volume.

----------------------------BOIL----------------------------

1.) Bring your wort to a boil. Watch for boil overs! Once you achieve a stable, rolling boil, slowly add your first hop addition and start your timer for 60 minutes (counting down). Add all subsequent boil additions at their appropriate times.

2.) Sanitize any equipment that will come into contact with your wort after the boil: airlock, stopper, wine thief, aeration stone, etc.

3.) Add your wort chiller to the pot near the end of the boil. You want it to spend a couple minutes at boiling temperatures to sanitize it. Be sure to connect the hoses before putting it into your pot.

4.) Once you’re finished boiling, start your cooldown by turning on the hose connected to your wort chiller to a slow rate of flow. The water coming out should be steaming hot, so be sure the outflow hose is directed somewhere safe.

a. Remember that you can increase the effectiveness of the wort chiller by agitating the wort in the pot or connecting another coil and submerging it in ice water to act as a pre-chiller.

5.) Use a sanitized metal spoon to rapidly stir your cooled wort to create a whirlpool. The hop sediment and other break material will be sucked to the center of the pot, and if you allow it to settle for 10-15 min, it will sink to the bottom. This allows you to rack off the clear wort, leaving the trub behind.

6.) Once cooled to fermentation temperature, whirlpooled, and settled out, rack into sanitized fermentor.

----------------------------PITCH----------------------------

1.) Take a sample of your wort and use your hydrometer to measure your original gravity.

2.) Oxygenate your wort by shaking the carboy for 5 min or spraying pure O2 for 30 seconds.

3.) Sanitize the exterior of the yeast package and use sanitized scissors to open.

4.) Add your yeast to your fermentor. Fill your airlock with sanitizer and fix in place with the stopper.

----------------------------DRY HOP----------------------------

1.) To add extra hop aroma to this recipe by dry-hopping, wait until the fermentation is almost or entirely complete:

a. Bubbling activity in the airlock should have slowed or stopped entirely.

b. After 10 days it’s safe to assume your fermentation has ceased.

2.) Remove airlock, add your dry hop addition to the fermentor (no need to sanitize the hops),
reinstall airlock.

3.) Wait 6 days before packaging.

Author:

Boil Size: 8.09 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/10/2020 6:48 AM

Notes:

Author:

Boil Size: 5.01 Gallons

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 64

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/16/2018 12:19 PM

Notes: 0905 - mash in at 152.3 - check it in 25 minutes

0932 - stirred mash and check temp - good 149.5-150, mash another 30 min & check conversion

1018 - checked at a little after 1000 and iodine test said conversion was complete, but gravity (refractometer) was only 5 (1020)... so since temp was down to ~145, I raised it back up and we'll check in 30 minutes

1056 just checked mash gravity now at 10 brix (1.040) - stirred while heating back to 150F, add 30min

1126 pulling the grain bag, regardless....11 brix (1.044)

really need a way to let the grains drip over/into the kettle...

at 5 min left to the boil I added about a pound of honey

we're not going to hit the gravity that we were supposed to (minus the honey) ... the volume of wort is too high in the kettle - I can't see the low squiggly line, so it's def going to be more than 3g

chilled total of 20 minutes

1064 / 15.4 brix in fermenter, but volume is > 3g

just adjusted the brewhouse efficiency so that the OG reflects actual (incl. honey)

Author:

Miguel Rios

Boil Size: 13 Gallons

Boil Time: 60

Boil Gravity: 1.068

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: sucrose

Priming Amount: 4.1 oz

Creation Date: 8/6/2020 5:43 PM

Notes:

Author:

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/23/2020 1:49 PM

Notes:

Author:

Ballpark

Boil Size: 26 Litres

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/31/2020 5:54 PM

Notes:

Author:

filthyastronaut

Boil Size: 201.5 Gallons

Boil Time: 60

Boil Gravity: 1.065

Efficiency: 72

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/12/2019 2:06 PM

Notes:

Author:

Boil Size: 31 Litres

Boil Time: 90

Boil Gravity: 1.064

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/30/2019 11:25 AM

Notes:

Author:

Tommaso

Boil Size: 28.5 Litres

Boil Time: 90

Boil Gravity: 1.044

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 1.0

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/27/2019 9:30 AM

Notes:

Author:

fredcai6

Boil Size: 2.8 Gallons

Boil Time: 90

Boil Gravity: 10

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Plato

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/16/2019 10:11 PM

Notes:

Author:

fredcai6

Boil Size: 2 Gallons

Boil Time: 60

Boil Gravity: 5.3

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Plato

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/23/2019 11:48 AM

Notes:

Author:

Boil Size: 6.5 Gallons

Boil Time: 90

Boil Gravity: 1.036

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/24/2018 3:30 AM

Notes: