All-grain Homebrew Beer Recipes | Page 71 | Browse 220,000+ at Brewer's Friend

Author:

jkendal

Boil Size: 13 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 80

Mash Thickness: 1.27

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 67 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/12/2013 3:27 PM

Notes: Brewed on 11/10/2013. OG was right on the money.

Update 11/14/13 - fermentation had already started the morning after brew day (which is typical for me) and as of last night it's slowed down quite a bit - all of my ales usually ferment out fairly quickly (I rarely have one still active on the 4th day). So now it'll sit for at least another 10 days to 2 weeks before it goes to keg (I don't ever rack to a secondary any more - gave that up years ago).

Update 11/29/13 - I usually keg my beers and let them carbonate naturally over a week or so, but with all the rain and then the preparations for the holidays I ran out of time and had to keg and force carb this batch just in time for Thanksgiving dinner yesterday, so it was just a tad cloudy (FG 1.015). It tastes like Full Sail but I don't have any on hand to compare, but it's delicious - I'll be brewing this one again, for sure!

Update 12/10/13 - the beer has cleared and the hops have mellowed a bit. This beer tastes fantastic! I'm trying to limit myself to just one whenever I go to the tap so that the 1st keg lasts through Christmas - I'm taking the 2nd one to a New Year's Eve party where I know it'll be a big hit!

If you're a fan of Full Sail Amber Ale, you will like this recipe. This is one terrific Amber Ale!

If you brew this, leave a comment and let me know what you think.

Author:

Mitch Wineman

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.037

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/4/2018 5:08 PM

Notes:

Author:

Keir Osborn

Boil Size: 22 Litres

Boil Time: 60

Boil Gravity: 1.058

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/29/2017 6:46 PM

Notes:

Author:

Show-Me Brewing

Boil Size: 13.5 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/2/2018 3:11 PM

Notes:

Author:

bright.haze

Boil Size: 31 Litres

Boil Time: 60

Boil Gravity: 1.045

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/1/2017 10:39 AM

Notes:

Author:

ZomBeerLand

Boil Size: 21 Litres

Boil Time: 60

Boil Gravity: 1.057

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/2/2017 1:05 PM

Notes:

Author:

chessking

Boil Size: 7 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/17/2011 6:14 PM

Notes:

Author:

Trekker23

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 70

Mash Thickness: 1.38

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 67 ° F

Priming Method: Dextrose

Priming Amount: N/A

Creation Date: 8/24/2014 4:54 PM

Notes:

Author:

Boil Size: 490 Litres

Boil Time: 60

Boil Gravity: 1.055

Efficiency: 75

Mash Thickness: 2.6

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 17 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/4/2015 3:24 PM

Notes: We won Silver for Dark IPA in the Ontario Brewing Awards for this one.

http://www.momandhops.ca/winners-announced-for-2015-ontario-brewing-awards/

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.031

Efficiency: 75

Mash Thickness: 1.33

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/8/2020 8:23 PM

Notes:

Author:

Ben's beers

Boil Size: 20 Litres

Boil Time: 60

Boil Gravity: 1.038

Efficiency: 75

Mash Thickness: 6

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 12 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/22/2015 2:33 PM

Notes: Of all the lagers I've made, this is the closest to commercial pilsners and is very similar to Peroni, Budweiser, Corona etc. It benefited from spending a few weeks in an outdoor shed in winter - a few freezing nights helped make it very bright and clear.

To make the lager dry and crisp, the recipe uses quick-cook rice and quick-cook polenta (the nearest things I could find in the drop-down menu were "flaked rice" and "grits", but I didn't use these). Because these adjuncts are "quick cook", they don't need a cereal mash - they just need to be cooked to make them mushy and expose the starch.

First prepare your water (profile light colored and malty). Then take a few litres out of it to boil the rice and polenta as per intructions on the packet. Let the pan of mushy rice + polenta fall to strike temp and simply tip it into the tun with the mash water at same strike temperature. Easy.

I did a full-volume mash for convenience and to save time. Efficiency will be a bit higher if you sparge.

Author:

Boil Size: 20 Litres

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 75

Mash Thickness: 5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/25/2018 3:04 PM

Notes: Socker sista 10 i koket

Author:

KillerBrew

Boil Size: 28 Litres

Boil Time: 90

Boil Gravity: 1.049

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/25/2015 12:35 AM

Notes:

Author:

Mellow Fellow

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.029

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/19/2016 7:24 PM

Notes:

Author:

DrPaulsen

Boil Size: 8.25 Gallons

Boil Time: 90

Boil Gravity: N/A

Efficiency: 80

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 75 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/27/2013 7:06 PM

Notes: Use White Labs Saison 3. Pitch 400-450B cells (200-225 gms of slurry).

Whirlpool Hot for 15 mins, then let settle for 15 mins.

Start Vol = 7.9 gal (68F), 8.27 gal (212F)
Finish Vol = 6.5 gal (68F), 6.77 gal (212F)
(Volume into Fermentor = 6 gal)
Ratio = 7.9/6.5 = 1.215
Gravity ~ 45 * 1.215 ~ 55

12 gms of citrus zest will equal around 500 ICUs, per Shaun Hill's metric.

http://embracethefunk.com/2012/05/14/icu-measurements-advice-from-hill-farmstead/

Author:

GlassCityBrewing

Boil Size: 9.5 Gallons

Boil Time: 60

Boil Gravity: 1.038

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 64 ° F

Priming Method: Force Carbonation

Priming Amount: 2.7 vol

Creation Date: 7/18/2013 3:03 PM

Notes:

Author:

loud brewing

Boil Size: 7 Gallons

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 74

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: 12.27 psi

Creation Date: 11/8/2019 12:12 AM

Notes: EBIAB 5.25 Gal Batch
6% ABV - 40 IBU

8 Gal 156f strike h20
Add salts
Mash 158-160
5.4 mash PH
15min boil addition of hops
10min boil addition whirlfloc and yeast nutrients
FLAMEOUT
Whirlpool addition @ 160f for 15min
Chill wort to 70F, transfer and aerate with oxy wand for 1min
Pitch 1-2 pack US-05 directly into fermenter
Ferment aprx 7-10 days at 65f
Dry Hop on day 2-3 for 7 days max
Add 2oz Citra for aroma in keg on pkg day.
Carb to 2.5-2.75 volumes CO2

Author:

Thor Wiegman

Boil Size: 4.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/8/2012 7:13 AM

Notes: I've been sad that I couldn't do all grain because I only have a 5 gal pot. Then I realized that I can absolutely do a smaller batch to get my feet wet until I can afford that big brew kettle. So I built the mash tun and made an immersion chiller while I was at it. I created the recipe using Brewtarget and scaled for the 4.5 gal maximum I could boil.

Anyway, this is what I came up with for my first all grain brew. I wanted to keep it simple and basic. We'll see how it tastes and then work on repeating it. Once I can repeat it well I will begin with simple modifications. Then I will take over the world.....or just drink beer.

So far I've learned a lot. The mash process was fun and interesting. I will be working on reducing liquid loss in the tun for sure.

Fermentation just didn't seem to be happening. The yeast packet says to just sprinkle on the wort. Instead I took about a third of the packet and stirred it in, sprinkled the rest on top. Wort was at 73*, right in the range the yeast had called for. Nothing.

By Tuesday I decided to buy another packet of yeast. Sprinkled all on top. Two more days of nothing.

Then I brought the fermenter in to the kitchen. Within 30 minutes the airlock was speaking to me. Within two hours it was speaking loudly. It seems that this yeast doesn't like the cold of the 56* beer closet. The kitchen is always either 68* or 62* (programmable thermostat for the house) and it likes this much better.

So now that I have a 10 gallon pot and grain mill on order, I know what the next area of focus will be. It's time to start thinking about temperature control. I want to do it as green a possible. Insulation. Digital temperature monitoring and control using the Arduino. Could be fun.

Update: A week after bottling we tried two of these. The beer is amazingly clear with a color that is a very dark amber, not quite brown. There is a very fruity smell. Unfortunately they both tasted like vinegar. I'm not sure the cause, maybe sanitation. Maybe too high of fermentation temp? Maybe I got overanxious and overpitched the yeast? I'm thinking that it had something to do with the point at which I added that second packet of yeast and that the vigorous fermentation could have been a clue that something went wrong.

Author:

jeremydgreat

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/8/2013 2:35 AM

Notes: - Tasting notes: Color is perfect. Clarity (whirlfloc + gel) really helped. Lacing and head are spot on. The bittering could come up a tick (from 60 to 70 perhaps.) Amarillo feels pretty orang'y and almost mellow! Maybe try the same recipe but swap some of the Amarillo for Cascade or event Centennial (more aggressively citrus'y.) I think using two "aroma" hops isn't enough. Something heavy hitting like Simcoe, Centennial, etc is needed for the heavy, hoppy backbone...

Now to try Centennial instead of Citra and make the adjustments mentioned above: http://www.brewersfriend.com/homebrew/recipe/view/91377/hopstand-ipa-v4-centennial-amarillo

Author:

iseefor

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/21/2017 7:48 PM

Notes: add matcha (in bags) before carb. (it should be crashed for 24hrs at this point). give around 24-36hrs contact time till package. use the same methods as you would with coffee. cold as shit and package fast.

20min hop addition is really Whirlpool. (10min active whirlpool, 10 min rest) then K/O.