Homebrew Beer Recipes | Page 374 | Browse 310,000+ at Brewer's Friend

Author:

JimmySpeakaz

Boil Size: 3 Gallons

Boil Time: 50

Boil Gravity: N/A

Efficiency: 30

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: Dextrose

Priming Amount: 3/4 Cup

Creation Date: 9/20/2012 1:56 PM

Notes: Add 2 tsp of Gypsum to water, based off starting with DC water.

The recipe released from the White House has an error, they mention 1.5 oz of Fuggle in the list of ingredients, but then only 0.5 oz in the instructions. I went with 1.5 oz here.

The instructions are also a little weird in terms of the boil times. They say 'add the honey and boil for 5 more minutes'. So, actually it is a 50 minute boil, not a 45 minute boil.

Other than that, it is a straight forward extract batch.

To get it to qualify as an Amber Ale, had to set the IBU equation to Rager, and the SRM equation to Daniels. I'm open to suggestions on the style (haven't tasted it).

Author:

cpa4ny

Boil Size: 28.4 Litres

Boil Time: 60

Boil Gravity: 1.041

Efficiency: 74

Mash Thickness: 3.1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 30 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/10/2019 9:46 AM

Notes: Yeast was Kveik Simonaitis, not available on Brewers Friend. So had to use Kveik Voss and force custom attenuation down to 100% (actually, the fermentation finished at around 0.998, i.e. over 100%).

Author:

harumph

Boil Size: 3.5 Gallons

Boil Time: 60

Boil Gravity: 1.115

Efficiency: 72

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/20/2018 10:17 PM

Notes:

Author:

Hadz

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.032

Efficiency: 65

Mash Thickness: 3.1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 12 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/16/2015 10:00 PM

Notes: Cool wort to 53F and aerate well. Ferment at 53F until approximately 2-5 points from final gravity, then raise the temperature to 65F keep it there for 2-4 days to reduce diacetyl (a buttery flavour produced by some yeasts). It's preferrable to lager for 1-2 months at near freezing before packaging.

Author:

davidsullivan

Boil Size: 28.5 Litres

Boil Time: 90

Boil Gravity: 1.04

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: 17 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/24/2015 7:17 AM

Notes:

Author:

Hellrik&Happy Arne

Boil Size: 34 Litres

Boil Time: 90

Boil Gravity: 1.038

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/3/2015 6:26 PM

Notes:

Author:

BarbarianBrewer

Boil Size: 8.82 Gallons

Boil Time: 60

Boil Gravity: 1.042

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: N/A

Priming Method: turbinado

Priming Amount: 0.6 oz

Creation Date: 4/17/2021 2:59 PM

Notes: Taken from David Heath's YouTube Channel https://www.youtube.com/watch?v=psfYrLCg6kE

* The golden syrup definitely adds a butterscotch/caramel flavor.
Stir syrup into hot water before adding to BK at 10 minutes

Yeast Options:
- WYeast 1968 London ESB
- White Labs WLP013 London Ale
- Fermentis S04
- Lallemand London ESB
- Imperial Yeast A09 Pub (on BF meeting Josh said he heard this is what Fullers uses)

Water: Target sulfate:Chloride ratio of 2:1
Note from April 2021 session suggests a 3:1 ratio for more hop bitterness.

Author:

LifeIsStout

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/23/2012 4:35 PM

Notes: Brewed this for a friend, should be ready for his labor day celebration.

Author:

Megary

Boil Size: 4.01 Gallons

Boil Time: 30

Boil Gravity: 1.043

Efficiency: 72

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 67 ° F

Priming Method: co2

Priming Amount: 14.98 psi

Creation Date: 9/18/2019 7:15 PM

Notes: Citric acid concentration in "Other Ingredients" should be 5%.

Use 1/2lb. lemons for 5-gal of Mash Water (scale up or down as necessary). Remove wax from lemons with hot water and paper towel. Zest lemons and set zest aside. Quarter lemons and add to mash. Remove lemons with spent grain and discard.

Add zest at end of boil.

Pitch yeast cool (64°F - 18°C)
Open ferment at 70°F - 21°C for 3-4 days, watching for signs of slowing activity.
Once fermentation slows, close with airlock and let free rise to ≈ 75°F - 24°C, or slightly above. Stay below 80°F - 27°C.

Leave in fermenter for ≈ 2 weeks, dry hopping with 2-3 days left.

Author:

DQYDJ

Boil Size: 23.9 Litres

Boil Time: 60

Boil Gravity: 1.078

Efficiency: 64

Mash Thickness: 2.74

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/26/2017 11:06 AM

Notes: Brewed with Tommie & Vincent

Author:

Boil Size: 7.5 Gallons

Boil Time: 120

Boil Gravity: 1.079

Efficiency: 62

Mash Thickness: 1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/16/2016 12:44 AM

Notes: Fills a ten gallon tun at one quart to pound. Plan on a partiguile.

Author:

AnteK

Boil Size: 25 Litres

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/22/2016 2:40 AM

Notes: BIAB method for Braumeister 20l, efficiency 70 %
total Water: 28l.

25l to mash
4l to sparge

Aerate the wort with pure oxygen or filtered air and pitch the yeast. Ferment at 18 C˚"14 days"
0 C˚ "5days"

After that Kegg it! CO2 level 2.5 vols.

Author:

Mattks

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 65

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/7/2015 8:19 PM

Notes:

Author:

IconoclastBrewing

Boil Size: 3 Gallons

Boil Time: 60

Boil Gravity: 1.085

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: 1.0

Primary Temp: 60 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/21/2015 6:01 PM

Notes:

Author:

zillano9

Boil Size: 7.7 Gallons

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.35

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/4/2015 7:26 PM

Notes: Brewed with help from Shane of sixpoint after my best guess at this recipe was almost spot on. Did a side by side at the brewery that sixpoint did a blog on.

Author:

StrangeQuark

Boil Size: 16 Litres

Boil Time: 75

Boil Gravity: 1.037

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Partial Mash

Pitch Rate: N/A

Primary Temp: 19 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/14/2015 2:20 PM

Notes: Slightly disaster filled first ever partial-mash brew-day. Intended to brew Sara Carter's Bombay IPA. Accidentally brewed this instead. Got lower than expected efficiency. Correctly calculated how much DME to add - but then inadvertently added 1Kg too much giving a much higher than expected OG.

This recipe was very bitter at the lower OG, so hopefully it will turn out reasonably well anyway. Even in the worst case scenario, I'm pretty sure I made beer.

90% attenuation based on what I actually got. Notty is amazin'.

Author:

Twin_Butte

Boil Size: 7.75 Gallons

Boil Time: 70

Boil Gravity: 1.047

Efficiency: 79

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/20/2014 4:38 PM

Notes: Here's my final cut based on info from the brewery. The crsytal 60 seems high but thats what the recipe calls for to get to 12 SRM. I may have to vary the hop additions just a bit depending on the alpha acid percentage. I'll be brewing this next weekend (hopefully). I'll let everyone know how it turns out.

EDIT** Adjust your caramel 60L and shoot for an SRM of 8.

Here it is:

SNPA CLONE

A ProMash Brewing Session Report
--------------------------------

Recipe Specifics
----------------

Batch Size (Gal): 6.50 Wort Size (Gal): 6.50
Total Grain (Lbs): 12.50
Anticipated OG: 1.053 Plato: 13.11
Anticipated SRM: 8.0
Anticipated IBU: 37.0
Brewhouse Efficiency: 77 %
Wort Boil Time: 70 Minutes

Actual OG: 1.053 Plato: 13.16
Actual FG: 1.011 Plato: 3.17

Alc by Weight: 4.21 by Volume: 5.39 From Measured Gravities.
ADF: 75.9 RDF 63.2 Apparent & Real Degree of Fermentation.

Actual Mash System Efficiency: 79 %
Anticipated Points From Mash: 53.07
Actual Points From Mash: 54.22

Pre-Boil Amounts
----------------

Evaporation Rate: 18.00 Percent Per Hour

Raw Pre-Boil Amounts - only targeted volume/gravity and evaporation
rate taken into account:

Pre-Boil Wort Size: 8.23 Gal
Pre-Boil Gravity: 1.042 SG 10.46 Plato

With sparge water, mash water, additional infusions, vessel losses, top-up
water and evaporation rate recorded in the Water Needed Calculator:

Water Needed Pre-Boil Wort Size: 7.75 Gal
Water Needed Pre-Boil Gravity: 1.045 SG 11.08 Plato

Formulas Used
-------------

Brewhouse Efficiency and Predicted Gravity based on Method #1, Potential Used.
Final Gravity Calculation Based on Points.
Hard Value of Sucrose applied. Value for recipe: 46.2100 ppppg
% Yield Type used in Gravity Prediction: Fine Grind Dry Basis.

Color Formula Used: Morey
Hop IBU Formula Used: Tinseth

Grain/Extract/Sugar

% Amount Name Origin Potential SRM
-----------------------------------------------------------------------------
8.0 1.00 lbs. Crystal 60L America 1.034 60
92.0 11.50 lbs. Pale Malt(2-row) America 1.036 2

Potential represented as SG per pound per gallon.

Hops

Amount Name Form Alpha IBU Boil Time
-----------------------------------------------------------------------------
0.50 oz. Magnum Pellet 13.60 25.4 60 min.
0.50 oz. Perle Pellet 7.70 7.3 30 min.
1.00 oz. Cascade Pellet 5.80 4.3 10 min.
2.00 oz. Cascade Pellet 5.45 0.0 0 min.

Yeast
-----

S-05, US-56, 1056 or WL 001

Mash Schedule
-------------

Mash Type: Single Step
Heat Type: Direct

Grain Lbs: 12.50
Water Qts: 16.00 - Before Additional Infusions
Water Gal: 4.00 - Before Additional Infusions

Qts Water Per Lbs Grain: 1.28

Grain Temp: 72 F

Dough In Temp: 0 Time: 0
Scarification Rest Temp: 153 Time: 60
Mash-out Rest Temp: 168 Time: 5
Sparge Temp: 170 Time: 10

Runnings Stopped At: 1.010 SG 2.56 Plato

Total Mash Volume Gal: 5.00 - After Additional Infusions

All temperature measurements are degrees Fahrenheit.

Water Needed For Brewing Session
--------------------------------

Sparge Amount: 5.00 Sparge Deadspace: 0.25 Total Into Mash: 4.75

Total Grain Lbs: 12.50 Qts Per Lbs: 1.28 Total From Mash: 2.50
Mash Gallons: 4.00
Grain Absorption: 1.50

Amount Lost in Lauter Tun Deadspace,
Grant and Misc. to Kettle: 0.50

Top Up Water Added to Kettle: 1.00
Amount into Kettle: 7.75

Boil Time (min): 70.00 Evaporation Rate: 18.00
Amount after Boil: 6.12

Left in Kettle Deadspace: 0.50
Left in Hopback: 0.00
Left in Counterflow Chiller: 0.25
Left in Other Equipment / Other Absorption: 0.00

Amount to Chillers: 5.37
Amount After Cooling (4 perc.): 5.16

Grain absorption rate is: 0.12 (Gallons Per Lbs)

Evaporation rate is Percent per Hour

This formulation will yield 5.16 gallons of fermentable wort.

You will need 10.00 gallons of water for the complete brewing session.

Fermentation Specifics
----------------------

Pitched From: Starter
Amount Pitched: 0 mL
Lag Time: 5.00 hours

Primary Fermenter: Glass
Primary Type: Closed
Days In Primary: 7
Primary Temperature: 68 degrees F

Carbonated to 2.4 volumes of CO2

Author:

daves1186@gmail.com

Boil Size: 8 Gallons

Boil Time: 60

Boil Gravity: 1.036

Efficiency: 55

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/20/2016 2:26 AM

Notes: Should yield ~ 8.5 Gallons @ 1.038

Ferment @ 66 for 7 days then dry hop for 5

Author:

Oazifirkin

Boil Size: 25 Litres

Boil Time: 60

Boil Gravity: 1.032

Efficiency: 50

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/29/2014 7:58 AM

Notes: very disappointing brewing efficiency on that specific day. ended up with a much weaker wort and down-sized the total boil / fermenter volume to remain within style limits. primary @ 19 c for 2 week, racked to keg with 90g corn sugar and lagered for 3 weeks @ 19 c. cold crash @ 2 C. pleasant carbonation, light tanned thick head with good retention. very malty balanced with a fresh aroma and bitterness (did not adjust hop addition to new volume). very pleased with the result

Author:

beermonger

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 85

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: 0.35

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/24/2014 12:38 AM

Notes: A really floral Amber ale. Just enough bitterness that everyone will enjoy. Closely resembles Widmer Alchemy ale. Recipes don't get much easier and much better for the extract brewer. Steep your grains at 165 for 45 minutes before your boil when you add your extract. Then remove grains and boil, add your extract. Return to boil, add hops at timed intervals. Cool to 70ish and pitch yeast in a sanitized fermenter. Once your airlock stops bubbling transfer into a glass carboy for 2 to 3 weeks, I Kegged mine but bottling is standard rules of 3/4 cup of corn sugar in 2 cups of boiling water and transfer into bottling bucket or carboy. Then bottle. Have fun with this recipe. It's the most basic you can get for partial mash brewing. Soon you will be adding more grains and using less extract.