All-grain Homebrew Beer Recipes

Page 10705 of our growing list of 215,000+ all-grain homebrew beer recipes. Sort by beer style, batch size, ABV and more.

Browse All Recipes or explore by brewing method: All-grain | Extract | BIAB | Partial Mash

Title	Style	Size	OG	FG	ABV	IBU	Color	Views	Brewed	Rating
Happy Hoppy Nectar	American Pale Ale	54 Litres	12.725	2.978	5.22	32.04	5.29 °L	77	0
Author: oziris1912 Boil Size: 60 Litres Boil Time: 60 Boil Gravity: 11.5 Efficiency: 71 Mash Thickness: 3.65 Sugar Scale: Plato Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 1/31/2025 11:41 AM Notes:
Milk Stout	Sweet Stout	2.75 Gallons	1.06	1.021	5.12	31.49	29.34 °L	77	0
Author: Noobie Boil Size: 3.4 Gallons Boil Time: 60 Boil Gravity: 1.042 Efficiency: 75 Mash Thickness: 1.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 5/31/2025 2:40 AM Notes:
BB Collab	American Pale Ale	110 Litres	1.054	1.01	5.68	11.21	4.33 °L	77	0
Author: Jean-Philippe Barrette Boil Size: 123 Litres Boil Time: 60 Boil Gravity: 1.05 Efficiency: 73 Mash Thickness: 2.8 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 4/25/2025 5:21 AM Notes:
Brighid's Irish Red Ale	Irish Red Ale	5.5 Gallons	1.06	1.011	6.33	61.57	12.98 °L	77	0
Author: Rosann Boil Size: 7.08 Gallons Boil Time: 60 Boil Gravity: 1.046 Efficiency: 70 Mash Thickness: 2 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 4/21/2025 1:50 AM Notes:
Tarragon Blond Ale	Blonde Ale	22 Litres	1.053	1.012	5.42	11.86	5.88 °L	77	0
Author: Boil Size: 26.83 Litres Boil Time: 60 Boil Gravity: 1.044 Efficiency: 70 Mash Thickness: 3.65 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 4/17/2025 4:17 AM Notes:
백운 흑맥주	Sweet Stout	20.8 Litres	1.072	1.015	7.47	38.21	29.37 °L	77	0
Author: Boil Size: 28.4 Litres Boil Time: 60 Boil Gravity: 1.053 Efficiency: 70 Mash Thickness: N/A Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 3/3/2025 5:57 AM Notes:
Basic APA	American Pale Ale	21 Litres	1.048	1.009	5.18	30.9	7.46 °L	77	0
Author: Justin Misener Boil Size: 27.3 Litres Boil Time: 60 Boil Gravity: 1.041 Efficiency: 75 Mash Thickness: 3.2 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: 20 ° C Priming Method: co2 Priming Amount: 0.89 bar Creation Date: 2/23/2025 11:44 PM Notes: A great place to start is a basic pale ale. These numbers are more or less geared for my system by default, so you might need to tweak numbers a bit depending on what system you brew it on. Something like 90% pale malt and 10% crystal 40L. The pale malt provides the majority of the starches which will convert to sugar during the brew and ultimately result in the lion's share of the alcohol content. Pale malt doesn't provide a huge amount of flavour on its own though, which is why we'll add crystal 40L. The crystal 40L gives the beer a bit of colour, toffee/caramel flavour, a fuller body, a bit of sweetness, and helps with head retention. For hops, to keep it simple I chose one single variety, Cascade. Cascade is super popular and easy to source. Cascade hops have floral, citrus, and pine flavours and aromas. I've added enough at boiled for 60 minutes tend not to contribute much flavour and 60min of boil to get about 30-32IBU bitterness. Hops that have next to no aroma though, so we'll add another 28g at 5min for flavour and aroma. If you want you can substitute out the Cascade hops for any hop you want, just make sure you tweak the amount of hops you use for the 60 minute addition so that you end up with about ~30IBU. Also, if you like your beer bitter, you could increase your 60 minute addition to 35, 40, or even 45IBU, and like-wise if you really don't like bitterness you can reduce the 60 minute addition to 20-25IBU. 30IBU is a good balance though with enough bitterness to offset the residual sweet maltiness. My water at home is kind of shit for brewing so I use a reverse osmosis system to get relatively pure water, but beer brewed without any minerals doesn't usually turn out great so I actually add some minerals back into the water to get the mineral profile that I want. That said, for starting out I would just use that spring water that you mentioned and not bother adding any minerals/salts back in; ignore my mineral additions listed under "Other Ingredients". The one exception is citric acid. It wouldn't be a bad idea to add a bit of citric acid or another appropriate acid to the malt to bring the pH down a bit. It isn't strictly necessary in this recipe, but it will only help! you'll need at least about 33L of water for this batch, and it's better to have more than you need on hand, so maybe collect 40L for brew day. I've chosen Fermentis US-05 yeast for this brew. It's probably the most popular yeast both with homebrewers and with the craft brewing industry. It's super forgiving and doesn't impart a lot of flavour on its own, letting the malt and hops shine through. It's super accessible and not too expensive and can make great beer. There's dozens if not hundreds of yeast strains to choose from. One other thing to mention is mash profile. The simplest you will get is a "single infusion mash". This is more or less that, though I add one step as my system is able to heat the mash up to 76°C before sparge which is beneficial for the sparge method known as "fly sparging", but I don't think it's necessary for the simpler "batch sparging". The mash temperature chosen is 67°C which is a good balanced temperature to sparge at, resulting in a beer that isn't too sweet or too dry. It can be tweaked higher or lower to suit preferences, but this is a good place to start. Probably 95% of beer styles can be brewed well with a single step mash. Lots of homebrewers like to complicate their mash schedules but the honest truth of it is that it often really just isn't at all necessary. That's it for the ingredients/design basics! As for the very basics of brewing this recipe see below. Note that the steps with a (*) are steps that will likely change significantly depending on what equipment the beer is brewed in, but I can help you tailor the recipe to your system once you have one: 1. *Mix in grist to 17L of water at ~73°C, mash should be about 67°C. Add citric acid. 2. *After 60min, ramp up mash temp to ~76°C and vorlauf until wort is clear. 3. *Sparge. 4. Bring wort up to a boil. Optionally before boil is reached take a sample and measure the pre-boil specific gravity of the wort. Write it down somewhere. Note that you'll need to cool this sample down to room temperature before taking your measurement. 5. Once boil is reached add the 60min addition of hops and start a timer for 55minutes. Leave the pot uncovered for the duration of the boil otherwise your beer might tasted like canned corn or cooked cabbage. Keep a close eye on the boil for the first 5-10 minutes as wort has a tendency to foam up and boil over, making a sticky mess. 6. While boiling, make use of the time to clean up stuff, toss the spent grain (you can feed it to chickens/livestock, just make SURE there are no hops in the spent grain because they are very toxic to quite a few animals!), and/or get a fermenter sanitized and ready. 7. After 55min, add the 5min addition of hops and set a timer for 5min. 8. Once your second timer has gone off you've been boiling for 60 minutes and it's time to move onto the next step. Turn off the heat, and cool the wort. It is preferrable to cool the wort as quickly as possible, as the less time spent between 65°C and 20°C the less chance of picking up wild spoilage organisms and ruining your hard work. I use an immersion chiller, they're super simple to make out of soft copper tubing. Plate chillers are super high performance and fast but also hard to clean and less beginner friendly. Alternatively, if your fermenter is able to handle hot liquids you could instead opt for the "no chill method". I won't go into details but you can read about it online. It's a bit higher risk but with good sanitation procedures it works just fine. 8.5 A quick note, but the name of the game from this point forward is cleanliness, sanitizing, and minimizing exposure to microbes. Once the beer is below 65°C it is possible for microbes to survive and reproduce in the wort, which will lead to infected and bad beer. Make sure everything that the beer touches is clean and has been properly sanitized, and don't waste time getting the wort into the fermenter and getting the fermenter sealed. There's always some microbial exposure because there's bacteria and mould spores floating through the air and such, but our job is to minimize exposure and give the yeast their best chance to thrive and out-compete all the other microbes. 9. Once the beer is chilled to ~20°C, transfer it out of the kettle and into your fermenter, leaving behind the solids (trub and hop debris) in the kettle. Depending on your equipment you can do a "whirlpool" while chilling to help condense your solids into a cone in the middle to help get as much wort from the pot as possible, but it's not a requirement. If you do this make sure you sanitize your paddle or pump loop by exposing them to boiling wort for a few minutes before the end of the boil. When transferring the wort into the fermenter it is recommended to let the wort splash and froth to help aerate the wort. Yeast need dissolved oxygen at the start of the fermentation to be happy and healthy. 10. With the wort in the fermenter, open up the yeast packet and sprinkle it across the surface. If you didn't aerate the wort during the transfer from kettle to fermenter this is a good time to either shake the fermenter or to beat and froth the wort with a sanitized paddle or spoon. Seal the lid on the fermenter and install an airlock, as the fermenter will off-gas CO2 and needs to be vented in such a way that air and fruit flies can't get in but CO2 can escape, otherwise it would build up pressure and rupture. Take a specific gravity reading of the wort in the fermenter and record it as the Original Gravity, or OG. This will help us calculate the final alcohol content of the finished beer. 11. Leave the fermenter somewhere that's about 20°C or so for about 3 weeks and preferably somewhere dark or with a sheet draped over it to keep the light off, otherwise it might develop a skunky aroma like corona. You can remove the sheet to look at it, but leave the fermenter sealed for the duration of the fermentation. While oxygen is a great thing for the first day of fermentation, every day after that it becomes the enemy as it makes beer taste awful if it gets oxidized, so your best bet is to keep it sealed up. 12. The airlock should start bubbling within 24hrs of pitching the yeast and should slow to a stop after 5-12 days, typically, though that is a very generalized statement. 13. After 2.5-3 weeks, take a gravity reading. Record the value. 2-3 days later measure again and record. If you get the same value as the previous sampling the beer has finished fermenting and is ready to package assuming the beer is cleared up enough for your liking. It could be clear, it may never get completely clear, it might need the help of a clarifying agent like gelatin, or it might clear in the fridge. It doesn't really matter so long as there isn't visible chunks/bits floating in the beer. Chilling the fermenter to 4°C or so can help things settle out but isn't necessary and can cause problems as the cooled fermenter will want to suck in air which isn't good. It's fine to give it an extra week or three in the fermenter if you aren't happy with it's clarity or if you aren't super convinced it's done fermenting, it's better not to rush at these last last few steps. 14. Package your beer, using sanitary practices and doing your best to minimize exposure to oxygen in the process. Don't forget to carbonate! Nobody want's flat beer! I won't go into details regarding the packaging side of things as I don't know what you're looking to do. If you plan to bottle I personally recommend swing-top bottles, but my personal preference and recommendation overall is to keg your beer, but that's really expensive compared to bottling. Still, bottling is the worst part of brewing and where infections are most likely to happen. Kegging is easy and you only have 1 big keg to clean and sanitize vs 50 bottles, and it's super easy to minimize oxygen pickup. Plus having beer on tap is pretty cool! Hope all of this helps!
2025 Red	American Amber Ale	50 Litres	1.048	1.009	5.12	31.43	12.78 °L	77	0
Author: Droopy brew Boil Size: 63 Litres Boil Time: 60 Boil Gravity: 1.043 Efficiency: 76 Mash Thickness: 3 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 2/8/2025 1:32 AM Notes:
Pale Ale	Blonde Ale	21 Litres	1.055	1.013	5.55	43.14	6.38 °L	77	0
Author: Old Codger Boil Size: 28.25 Litres Boil Time: 90 Boil Gravity: 1.041 Efficiency: 70 Mash Thickness: 3 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: 18.5 ° C Priming Method: N/A Priming Amount: N/A Creation Date: 2/8/2025 12:50 AM Notes:
2025 Irish Red	Irish Red Ale	260 Gallons	12.284	3.375	4.77	17.9	16.46 °L	77	0
Author: Boil Size: 270 Gallons Boil Time: 60 Boil Gravity: 11.8 Efficiency: 80 Mash Thickness: 1.25 Sugar Scale: Plato Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 2/7/2025 2:33 PM Notes:
Equinox Rising American Pale Ale - Tweaked All Grain	American Pale Ale	24 Litres	1.056	1.01	6.01	43.86	5.84 °L	77	0
Author: michaelb.yvr Boil Size: 28.2 Litres Boil Time: 60 Boil Gravity: 1.048 Efficiency: 83 Mash Thickness: 2 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.5 Primary Temp: N/A Priming Method: dextrose Priming Amount: 260.2 g Creation Date: 11/8/2021 4:59 AM Notes: Whirlpool method 1. Add Whirlfloc @10 mins left on boil 2. Add 0 min hop addition 3. cut flame/ heat and whirlpool with hops in kettle. Wait 10 minutes 4. Take out Hops and wait another 10 minutes 5. Cold Crash after this rest period
House Pale Ale	American Pale Ale	6 Gallons	1.048	1.01	5.02	49.16	9.3 °L	77	0
Author: magee_b Boil Size: 7.14 Gallons Boil Time: 60 Boil Gravity: 1.041 Efficiency: 72 Mash Thickness: 1.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: 85 ° F Priming Method: N/A Priming Amount: N/A Creation Date: 1/3/2025 8:43 AM Notes:
The Boar	Blonde Ale	840 Litres	1.042	1.008	4.47	38.82	6.21 °L	77	0
Author: Boil Size: 862.2 Litres Boil Time: 60 Boil Gravity: 1.041 Efficiency: 75 Mash Thickness: N/A Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: 20 ° C Priming Method: N/A Priming Amount: N/A Creation Date: 12/10/2024 12:30 PM Notes:
VanillaStout	Oatmeal Stout	11 Litres	1.047	1.009	5.01	17.86	36.6 °L	77	0
Author: Torky13 Boil Size: 17 Litres Boil Time: 60 Boil Gravity: 1.031 Efficiency: 75 Mash Thickness: 3.3 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: 18 ° C Priming Method: dextrose Priming Amount: 64.7 g Creation Date: 10/27/2024 7:01 AM Notes:
Awesome Recipe	American Amber Ale	5.5 Gallons	1.04	1.01	3.94	0	3.78 °L	77	0
Author: Boil Size: 7.01 Gallons Boil Time: 60 Boil Gravity: 1.031 Efficiency: 75 Mash Thickness: 1.75 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 9/24/2024 9:29 PM Notes:
Awesome Recipe	American Pale Ale	1 Gallons	1.059	1.015	5.81	153.31	3.89 °L	77	0
Author: Boil Size: 2.5 Gallons Boil Time: 60 Boil Gravity: 1.024 Efficiency: 75 Mash Thickness: N/A Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: sucrose Priming Amount: 1 oz Creation Date: 9/17/2024 2:50 AM Notes:
Awesome Recipe	American Pale Ale	1110 Litres	1.042	1.011	4.18	0	5.9 °L	77	0
Author: Boil Size: 1115.7 Litres Boil Time: 60 Boil Gravity: 1.042 Efficiency: 75 Mash Thickness: 2.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 9/5/2024 2:59 AM Notes:
Awesome Recipe	American Pale Ale	19 Litres	1.051	1.011	5.26	45.32	3.52 °L	77	0
Author: Minyoung Hur Boil Size: 24.96 Litres Boil Time: 60 Boil Gravity: 1.039 Efficiency: 70 Mash Thickness: 4.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 7/21/2024 7:44 AM Notes:
Citra Session IPA	American Pale Ale	315 Litres	1.043	1.008	4.59	36.05	7.55 °L	77	0
Author: Boil Size: 322 Litres Boil Time: 60 Boil Gravity: 1.042 Efficiency: 61 Mash Thickness: 3.13 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.75 Primary Temp: 18.3 ° C Priming Method: N/A Priming Amount: N/A Creation Date: 6/19/2024 12:52 AM Notes: 本当はOG1.050を目指している。 で、315ℓが煮沸の限界なので、340ℓに希釈したときに1.050にするよう計算した。 Wort Volume : 315ℓ Current Gravity: 1.054 Desired Gravity: 1.050 New Volume:　340.20を目指す Difference: 25.20ℓ追加 Final Gravity (FG):1.012を目指す ◆6月25日 煮沸時に322ℓあって、煮沸後315ℓ⇒発酵タンクには310ℓきっかり で、本来1.054目指してたのに、1.05着地で、そこから1.045着地に変更して水を足した。そしたら、着地がさらに落ちて1.043。
Golden Ale	Blonde Ale	6 Gallons	1.048	1.008	5.32	23.66	3.29 °L	77	0
Author: Marky Jensen Boil Size: 7.5 Gallons Boil Time: 60 Boil Gravity: 1.039 Efficiency: 70 Mash Thickness: 1.2 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: 68 ° F Priming Method: sucrose Priming Amount: 5.3 oz Creation Date: 11/30/2022 6:11 PM Notes:
« First ‹ Previous 10701 10702 10703 10704 10705 10706 10707 10708 10709 Next › Last »							Page 10705 of 10,989 20 Recipes of 219,779