AZ Copper Rye IPA (PM) Beer Recipe | Partial Mash Specialty IPA: Rye IPA | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

AZ Copper Rye IPA (PM)

206 calories 17.9 g 12 oz
brewer logo
Beer Stats
Method: Partial Mash
Style: Specialty IPA: Rye IPA
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 3.5 gallons
Post Boil Size: 2.5 gallons
Pre Boil Gravity: 1.063 (recipe based estimate)
Post Boil Gravity: 1.138 (recipe based estimate)
Efficiency: 85% (brew house)
Source: Jorge Sarabia
Hop Utilization: 96%
Calories: 206 calories (Per 12oz)
Carbs: 17.9 g (Per 12oz)
Created: Saturday October 30th 2021
1.063
1.011
6.8%
71.9
13.8
5.3
n/a
Want no ads? Go Premium and unlock all our brewing tools!
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
4 lb Rahr - Standard 2-Row4 lb Standard 2-Row 36.8 1.8 39.5%
1 lb Weyermann - Pale Rye1 lb Pale Rye 37 3.2 9.9%
1 lb Flaked Rye1 lb Flaked Rye 36 2.8 9.9%
0.50 lb Briess - Caramel Malt - 40L0.5 lb Caramel Malt - 40L 35.4 40 4.9%
0.50 lb United Kingdom - Crystal Rye0.5 lb Crystal Rye 33 90 4.9%
0.13 lb Weyermann - Carafa Special Type II0.13 lb Carafa Special Type II 29.9 425 1.3%
3 lb Dry Malt Extract - Extra Light3 lb Dry Malt Extract - Extra Light - (late boil kettle addition) 42 2.5 29.6%
10.13 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1 oz Azacca1 oz Azacca Hops Pellet 12.2 Boil 60 min 36.1 25%
1 oz Zamba1 oz Zamba Hops Pellet 10 Boil 30 min 22.74 25%
1 oz Zamba1 oz Zamba Hops Pellet 10 Boil 5 min 5.9 25%
1 oz Azacca1 oz Azacca Hops Pellet 12.2 Boil 5 min 7.2 25%
4 oz / $ 0.00
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
4 gal Strike 152 °F 152 °F 60 min
3 gal Top Off 70 °F 70 °F 5 min
 
Other Ingredients
Amount Name Cost Type Use Time
5 g Gypsum Water Agt Mash --
1 g Calcium Chloride (anhydrous) Water Agt Mash --
1.50 g Epsom Salt (MgSO4) Water Agt Mash --
0.80 g Table Salt Water Agt Mash --
0.50 tsp Wyeast - Beer Nutrient Other Boil 10 min.
1 each Whirlfloc Fining Boil 10 min.
0.25 tsp Brewtan B Other Mash 1 hr.
0.50 tsp Brewtan B Other Boil 15 min.
 
Yeast
Wyeast - American Ale 1056
Amount:
1 Each
Cost:
Attenuation (custom):
81%
Flocculation:
Med-Low
Optimum Temp:
60 - 72 °F
Starter:
Yes
Fermentation Temp:
70 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 113 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       CO2 Level: 2.65 Volumes
 
Target Water Profile
Distilled
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
57.6 5.6 11.9 42.4 127.3 0
Mash Chemistry and Brewing Water Calculator
"AZ Copper Rye IPA (PM)" Specialty IPA: Rye IPA beer recipe by Jorge Sarabia. Partial Mash, ABV 6.78%, IBU 71.93, SRM 13.81, Fermentables: (Standard 2-Row, Pale Rye, Flaked Rye, Caramel Malt - 40L, Crystal Rye, Carafa Special Type II, Dry Malt Extract - Extra Light) Hops: (Azacca, Zamba) Other: (Gypsum, Calcium Chloride (anhydrous), Epsom Salt (MgSO4), Table Salt, Beer Nutrient, Whirlfloc, Brewtan B)
Recipe Picture
Last Updated and Sharing
 
217
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2022-01-01 21:25 UTC
NEW Water Requirements:
AZ Copper Rye IPA (PM)
Equipment Profile Used

System Default

Close
Print
Water Requirements:
AZ Copper Rye IPA (PM)
Close
Print
Recipe Cost $ (USD)
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
Gallons
Cost $ Cost %
Fermentables $
Steeping Grains
(Extract Only)		 $
Hops $
Yeast $
Other $
Cost Per Barrel $ 0.00
Cost Per Pint $ 0.00
Total Cost $ 0.00
Ok
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top
Want no ads? Go Premium and unlock all our brewing tools!
Copyright © 2007-2024 Brewer's Friend, Inc. - Send Feedback - Terms - RSS Feed - Do Not Sell or Share My Personal Information