Homebrew Beer Recipes | Page 860 | Browse 310,000+ at Brewer's Friend

Author:

TWisBrewer

Boil Size: 610.2 Litres

Boil Time: 60

Boil Gravity: 1.061

Efficiency: 75

Mash Thickness: 2.9

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/3/2015 8:08 PM

Notes: For 11 gal/ 41.64 liter batch mash notes:
Mash schedule: single
Infusion, medium body,
Batch sparge
Total grain weight 25 lbs

Step time name description step temp
60min mash in add 31.25 qt of water at 166.9 F 154.0 F

Notes (for 11 gal/ 41.64 liters):
Dough-in with 7.75 gallons of 167 F water
Double batch sparge with 5 gallons of 170 F water per sparge
Collect 13.69 gallons of wort in kettle for boil
30 psi for 2 days, gently stir - then 30 psi for another 12 hours, then serve.

Author:

gbates

Boil Size: 6.2 Gallons

Boil Time: 30

Boil Gravity: 1.053

Efficiency: 77

Mash Thickness: 1.33

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 65 ° F

Priming Method: co2

Priming Amount: 10.74 psi

Creation Date: 9/23/2019 4:00 PM

Notes: I've been editing this recipe based on my first attempt from the linked source. My impression of my first attempt was that the beer was a bit too hoppy and lacked the malty assault I was expecting of a Conway's clone.

Some key deviations from my first attempt (from source):

- Grain bill now uses Maris Otter as a base and 2 lb portion of Munich. The roasted malts are largely the same.

- I like to start with distilled water and add my salts, and I've learned a good bit about water chemistry since my first attempt. This time around I picked the balanced profile to get a decent baseline. This is different from the first attempt, where I arbitrarily used 5g of gypsum and called it a day.

- Switched to Safale S-04 yeast from Wyeast 1028 (London Ale) just for fun. Have been using Wyeast for all my beers until now.

- Replaced Hollertau Mittelfruh with Styrian Goldings to pair English hops with more English hops. This is more OCD than practical.

Author:

Ozarks Mountain Brewery

Boil Size: 15 Gallons

Boil Time: 90

Boil Gravity: 1.047

Efficiency: 80

Mash Thickness: 1.75

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/26/2018 2:33 AM

Notes:

Author:

bira delisi

Boil Size: 28 Litres

Boil Time: 90

Boil Gravity: 1.044

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 16 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/7/2018 12:12 PM

Notes:

Author:

Zaphod Brewblebrox

Boil Size: 4.5 Litres

Boil Time: N/A

Boil Gravity: 1.114

Efficiency: 35

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: Extract

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/5/2017 8:59 PM

Notes: 10g of sourdough added to 2,2L applejuice.

Author:

jimbrookski

Boil Size: 30 Litres

Boil Time: 60

Boil Gravity: 1.049

Efficiency: 70

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 18 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/5/2017 2:13 AM

Notes:

Author:

Xexéu

Boil Size: 68 Litres

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 65

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 22 ° C

Priming Method: açúcar de cana

Priming Amount: 7g/l

Creation Date: 3/2/2016 5:22 PM

Notes:

Author:

nikodino

Boil Size: 13.5 Gallons

Boil Time: 90

Boil Gravity: 1.058

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/17/2014 7:07 AM

Notes:

Author:

FatsSchindee

Boil Size: 2.6 Gallons

Boil Time: 75

Boil Gravity: 1.056

Efficiency: 65

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 1.25

Primary Temp: 60 ° F

Priming Method: Corn sugar

Priming Amount: N/A

Creation Date: 11/10/2015 3:58 PM

Notes: Can use altbier yeast (WLP 036) also, but Kölsch (Wyeast 2565 or WLP029) is more attenuative (or also a Belgian Abbey strain, or WLP 810 SF Lager). Could also add some oak cubes for a wood-aged version. Lager for 1-2 months.

No subcategory for this historical style, so I just entered under Düsseldorf Altbier, since this is a similar (but bigger and more complex - smoke and maybe slight sour) beer from Düsseldorf.

Vital Statistics:
OG: 1.074–1.110
FG: 1.015 – 1.030
IBUs: 30 - 40
SRM: 11 - 14
ABV: 9 - 10%
(Copied from Ozapft Is! Homebrew comp guidelines)

Author:

Genus Brewing

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.05

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/11/2015 8:07 PM

Notes:

Author:

Huberman

Boil Size: 26 Litres

Boil Time: 60

Boil Gravity: 13.3

Efficiency: 75

Mash Thickness: 3

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 25 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/27/2015 3:59 PM

Notes:

Author:

The Blind Bard

Boil Size: 6.8 Gallons

Boil Time: 60

Boil Gravity: 1.04

Efficiency: 70

Mash Thickness: 1.3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/23/2015 12:45 PM

Notes: Toasted oats

Author:

SuperCoolGuyBrewing

Boil Size: 6.75 Gallons

Boil Time: 60

Boil Gravity: 1.034

Efficiency: 72

Mash Thickness: 1

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 64 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/17/2015 10:20 AM

Notes: - yeast starter of 1L to wake up yeast

- hop aroma and target 28 - 30 IBU no more no less
- use various yeast strains, try thing that fermejnt dry frist, but don't be afraid to true less attenuative yeasts. This is supposed to act like a yeast experimental brew.
- if FG due to yeast higher than 1.014 drop some crystal malts in favor of ESB malt
- Mash lower for less attenuative yeasts like WLP002.
- Should I use a 1.75 Qt/lb or stick to 1.25? - what is typical of british beers???
-**consider trying an open bucket fermentation, like on BTV episode 4 (consider fermenting slightly cooler if open) - for an open ferment, use wy1275 or wy1335 and use in swamp cooler style for temp control and cheese cloth***
-CONSIDER mashing for 90 mins instead of 60 to increase attenuation (still at 153/54)
- Mashing thin appears to induce a stronger malt profile?
-Ferment for 1 week to 2 weeks, then bottle, no longer than 2 weeks to prevent clean up, consider performing a D-rest, then reducing to cellar temps of 55F for conditioning phase after primary is over.
- Perhaps use Wy1968 as a baseline of open vs closed, then explore other strains?
- Does using sugar help the ester profile by "artificially" darkening the wort? Ie, using higher kilned malts may slightly inhibit ester production??? *answers* = Dunno? experiment with dark grains vs. dark sugars.
- Pitch proper amount of yeast, so moderate starter, and aerate the beer well to encourage healthy fermentation.
- Maintain final temp (whatever i choose like 63F) until FG is reached, and stir up yeast if attenuation is under. Once FG reached crash cool to 45F then rack to secondary and condition for another week at 55F? or lower?
- "Just a word of warning: If you really are planning on bottling this batch, I would make sure your final gravity is low enough to ensure the yeast don't reactivate once in the bottle. This yeast is notorious for going dormant in the fermenter only to 'wake up' after bottling, eating both the priming sugar and residual sugars in the beer; producing an over-carbonated, cidery taste. I've seen this happen soo many times, both in my own beers and while judging. For that reason, I rarely bottle carbonate beer fermented with this yeast. If I absolutely have to do it, I will crash cool the beer to near freezing as to flocc as much of the yeast out and then bottle using some US-05/champagne yeast. It doesn't always happen, but just be aware that it might."
- "It's all about fermentation control. Start with healthy yeast, aerate well, and don't let your fermentation temps fluctuate. Pitch below fermentation temperature, let rise to 68F for most of the fermentation, give it a good d-rest at 70F for a few days, then crash cool before kegging/bottling. All this should not take more than 2 weeks; and you'll still have a clean, flavorful beer."
- consider priming with fresh wort, or DME to avoid cidery flavors from 1968/002 or any of the other brittish yeasts*
- Pitch low (63F) then free rise to 68F till half ferm, then drop to 63F till FG then crash cool and rack to secondary, then raise to cellar??? 55f?? or bottle? or condition at 43F?
- once 1/5 to 1/4 to FG crash cool to 43F for 2 days followed by raising to 50F to cellar for min 2 weeks followed by chilling beer to -1 and hold for 1 week (to chill proof for bottling - but is filtered and flash pasteurized) so maybe got to FG to crash cool.
- also to note, the fullers beer is parti gyled, so there is no sparge which leads to fuller malt expression.
- fullers parti gyle method is to run the liquid off until they've reach their target volume, then divert to a second kettle for the other wort??
-oxidative flavor is present, but subdued. How to achieve it???
-

-------Yeasts of interest--------------
-Wyeast 1318 - London Ale 3 (boddingtons)
-WLP002 - English Ale (fullers)
-Wyeast 1275 - Thames Valley Ale (Brakspear/Wychwood?)
-Wyeast 1335 - British Ale 2 (adnams?)
-Wyeast 1469 - West Yorkshire Ale (Timothy Taylor) (use larger starter?)
-Wyeast 1187/WLP005 Ringwood Ale (Pripps - complex fermentation - read up)
-WLP037 Yorkshire Square (Samuel Smith's - seasonal)
WLP026 Premium Bitter (Marston's - known for paler beers - also needs long bottle conditioning time)
-WLP004/Wyeast 1084 Irish Ale (Guinness - not super interested, use last)

Author:

MenaceOne

Boil Size: 124 Gallons

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/1/2015 8:10 PM

Notes:

Author:

SpencerG11

Boil Size: 7.5 Gallons

Boil Time: 75

Boil Gravity: 1.033

Efficiency: 70

Mash Thickness: 1.33

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/16/2015 4:55 AM

Notes:

Author:

tbridge

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.5

Primary Temp: 60 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/15/2017 4:32 PM

Notes:

Author:

Ornelas

Boil Size: 24 Litres

Boil Time: 60

Boil Gravity: 1.034

Efficiency: 60

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 7/7/2017 11:12 PM

Notes:

Author:

Boil Size: 26 Litres

Boil Time: 60

Boil Gravity: 9.4

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/26/2015 9:35 PM

Notes:

Author:

Brew Dungeon

Boil Size: 4.5 Gallons

Boil Time: 45

Boil Gravity: 1.037

Efficiency: 78

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: BIAB

Pitch Rate: 0.75

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/8/2019 4:21 PM

Notes: Just a stab at an amber ale using the hops and yeast I have on hand.

Author:

Joel Bergman

Boil Size: 5.75 Gallons

Boil Time: 60

Boil Gravity: N/A

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/2/2011 11:41 PM

Notes: