Homebrew Beer Recipes

Page 1740 of our growing list of 310,000+ homebrew beer recipes. Sort by beer style, batch size, ABV and more for all-grain, extract or partial mash brewing.

Browse All Recipes or explore by brewing method: All-grain | Extract | BIAB | Partial Mash

Title	Style	Size	OG	FG	ABV	IBU	Color	Views	Brewed	Rating
Centenial Clash IPA	American IPA	23 Litres	1.068	1.012	7.3	57.89	13.91 °L	995	0
Author: Boil Size: 28 Litres Boil Time: 60 Boil Gravity: 1.056 Efficiency: 75 Mash Thickness: 3.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: N/A Primary Temp: 23 ° C Priming Method: N/A Priming Amount: N/A Creation Date: 9/18/2016 10:57 AM Notes:
Rushmore IPA	American IPA	19 Litres	1.06	1.013	6.22	76.35	8.45 °L	995	1
Author: zhooker Boil Size: 25 Litres Boil Time: 60 Boil Gravity: 1.046 Efficiency: 65 Mash Thickness: 3 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.75 Primary Temp: 18 ° C Priming Method: N/A Priming Amount: N/A Creation Date: 4/14/2018 2:46 PM Notes: Mash grains at 153° F (67° C) for 60 minutes. Mash out at 168° F (76° C), with pre-boil wort volume of 7 gal. (26.5 L). Bring to a rolling boil for 60 minutes, adding hops at specified intervals from end of boil. Chill wort to 65° F (18° C) and pitch yeast. Ferment in primary at 65° F (18° C) until fermentation slows significantly (7–9 days). Rack to secondary fermenter and dry hop for no more than 10 days at 68° F (20° C). Keg at 2.5 volumes (5 g/L) of CO₂ or bottle condition with 4 oz. (113 g) corn sugar.
Thomas Hardly Ale	English Barleywine	5 Gallons	1.122	1.017	13.78	67.47	13.39 °L	995	0
Author: Brews Brother Boil Size: 6 Gallons Boil Time: 60 Boil Gravity: 1.102 Efficiency: 70 Mash Thickness: 1.2 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: 66 ° F Priming Method: N/A Priming Amount: N/A Creation Date: 1/27/2018 6:15 PM Notes: This is a first effort to start dialing in my recipe. My research suggests that this was originally a single malt beer (Pipkin), though many clone recipes use a mix of crystal malts and sometimes even peated malt. I plan to age this for a year in a Balcones barrel that I've already used several times, and so expect the whiskey influence to be minimal. Because of the aging, I expect to use a second yeast addition at bottling. Second runnings and a 5.5 gallon sparge should produce a second small beer. I'll welcome any thoughts and comments.
Naughty Neighbor	American Pale Ale	19 Litres	1.053	1.012	5.43	46.46	5.98 °L	995	0
Author: Boil Size: 28.5 Litres Boil Time: 60 Boil Gravity: 1.036 Efficiency: 70 Mash Thickness: 3 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: 20 ° C Priming Method: Corn sugar Priming Amount: 184g Creation Date: 1/25/2018 3:23 AM Notes:
Sour Weasel Lambic [Master]	Lambic	38 Litres	1.059	1.008	6.75	4.74	5.06 °L	995	1
Author: Flying Weasels Home Brewery Boil Size: 46 Litres Boil Time: 60 Boil Gravity: 1.059 Efficiency: 55 Mash Thickness: 1.2 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.5 Primary Temp: 28 ° C Priming Method: co2 Priming Amount: N/A Creation Date: 11/24/2017 3:24 PM Notes: To date, I've done this one during my winter brewing schedule, but it would also be a good one to do in the summer, given that I ferment the Old World Saison blend at ~25C. This is a full-size batch: 43L including the yeast starter. Use two 50-gallon pails for fermentation. I only do this once a year and it's probably my most labor-intensive recipe, so I might as well maximize the yield. IMPORTANT: Recipe requires the use of 1 SS pot and one HLT/kettle, so you will need two full propane tanks, not just one. Have a "dipping pot" handy for removing draws (decoctions). YEAST ================ Pitch yeast and bugs separately: - Escarpment Labs Old World Saison Blend (I've also used Omega Yeast OYL-217 C2C American Farmhouse Ale) - Escarpment Labs Belgian Sour Blend TURBID MASH ================ - Grind unmalted wheat at widest setting, then at one tick less than the widest setting. It will still be difficult to get it all ground. Watch our for jams! (For LBC7, I did 3 grinds. The second two were wheat and malt mixed together.) There is an excel cheat sheet that summarizes this rather confusing mash schedule on Google Drive. Name = "Sour Weasel Steps.xlsx" https://drive.google.com/file/d/1Z3OikVQ3tpStJSIUvxEeoUlaktjAV-tV/view It includes info on total water in use and liquor/grist ratio at any one point. Maybe I should do a word version of these instructions too. Just to make things nice and easy in the future. 0. PREPARE ------------------------ HLT: 44.0L (full) bring to 134F, use 14L in Protein rest, and bring the rest to a boil. [Don't dough in until s/s pot is close to a boil.] SS pot: bring 10L to a boil: 8L for use in Gelatinization rest, refill it after that 1. PROTEIN REST ---------------------------- SS pot should be close to a boil before you proceed. Add 14L water from HLT at 132F (55.5C) to dough in at a strike temperature of 113°F (45°C). Hold temperature for 10–20 minutes. There is not much water in the mash so do not over-react when you take temp. It might be way high or low initially. Give it time to even out before you attempt to "fix the problem". Online sources say "A protein rest is a short mash at 113-131˚F used to activate certain enzymes in the malted grains that break down protein chains." Bear that in mind! After addition of 14L to mash tun: - HLT: 30L, coming to a boil - S/S pot:10L, at or near a boil 2. GELATINIZATION REST FOR RAW WHEAT ----------------------------- Add 8L boiling water (from SS pot) to raise the temperature of the mash to about 137°F (58°C) and hold for 10 minutes. Note that Milk the Funk says: unmalted wheat has a gelatinization temperature range starting between 136-147°F (58-65°C) and can, therefore, be gelatinized during a beta-amylase/maltose rest (fine milling will help efficiency) [1]. We need 8L more brewing water at this point. If the HLT is at or near a boil, add it directly to the HLT. This is the preferable way to go, but if the HLT isn't hot enough, do the following. Refill the SS pot with 8L fresh brewing water. Put the heat on and get it coming to a boil. Once the HLT is at or near a boil, empty the SS pot into the HLT. You will need the empty SS pot for the first turbid draw (decoction). After transfer and re-addition of 8L boiling water: - HLT: 30L, coming to a boil - SS pot: 10L coming to a boil After transfer from SS pot to HLT: - HLT: 40L, coming to a boil - SS pot: empty, ready for first draw (decoction) FIRST TURBID DRAW ------------------------------ Remove 3L of cloudy liquid, place it in SS pot and heat to 180°F (82°C) to halt enzymatic activity and hold it there. After removal of 3L water: HLT: 40L, at or near a boil SS pot: 3L, maintaining 180F BETA AMYLASE REST ------------------------------- Add 11.5L boiling (206F) water from HLT to the mash to raise the temperature to 150°F (66°C). Hold it there for half an hour. If water addition is not sufficient to reach desired temp, use HERMS. After addition of 11.5L water: HLT: 28L SS pot: 3L, maintaining 180F SECOND TURBID DRAW -------------------------------- Remove 8L of liquid from mash. Add it to the SS pot with the first draw. Heat the pot to 180F (82C) and maintain it there. After transfer of 8L mash to SS pot: - HLT: 28L, at a boil - S/S pot: 11L, maintaining 180F // SS pot is now perilously full! ALPHA AMYLASE REST --------------------------------- Add 11.5L boiling water to raise the temperature of the mash to about 162°F (72°C) and hold for another half hour. If water addition is not sufficient to reach desired temp, use HERMS. After addition of 11.5L water: HLT: 16.5L bring to 190F or more for sparging S/S pot: 11L, coming to a boil so it can be added back to mash in final step. Don't bring the draws to a 'real' boil. The pot is too full and a boilover would be truly nasty. MASH OUT --------------------------------- Make sure the draws are close to a boil, then return them to the mash to raise the temperature to 168°F (76°C). Use HERMS, if necessary. Hold at this temperature for 5–10 minutes before lautering and sparging. HOWEVER, at this point, there is not enough room for the decoctions to be returned to the mash, and the HLT still has water in it, so you can't start using it as a kettle. Here's what to do: - Start running off into a 5-gal bucket to make room for the decoctions. - Once there's room, dump the decoctions into the mash tun. - Keep running off until you have exposed the mash bed. (This is to get the max gravity in the first batch, which you can isolate and add to the kettle first. Then only add the sparged wort as necessary, in case you have obtained too much. Which increasingly I am not doing as I dial in this recipe, but is a worthwhile approach in any event, I think.) - Add remainder of HLT to mash. HLT is now empty. - Start using HLT as a kettle now. - Add all collected wort to kettle. (It is a lot, so set up the collector pot, pour it into that, and pump it into the kettle, rather than trying to lift 5-gallon buckets of hot wort.) After return of 11L water: HLT: now being used as a kettle, filling with heat on S/S pot: empty, no need for this any more Based on my experience with LBC6 and LBC6, I have adjusted total water down twice. It should now come in close with not much extra sparge at the end of the boil After the mash is complete, vorlauf, lauter, and sparge as usual, but sparge with water that is hotter than usual, about 190°F (88°C). A hot sparge is necessary to gelatinize starches in the raw wheat and carry them into the kettle. Collect your usual pre-boil volume and proceed as usual. The resulting wort is going to be very cloudy, almost milky in opacity. But with time, as your souring bugs chomp away on all of those starches, the beer will clarify. In a year or more, you’ll have surprisingly clear lambic that may be enjoyed on its own or blended with older lambics to create gueuze. HOPS ================ Hops should be aged hops. Hopefully you have enough from last year's back yard harvest. If not, throw in some weak bitterness hops, like Saaz. Use about 4 ounces of back yard hops. Boil the hops in a mesh bag. Remove the bag before runoff. Pushing the hops into the kettle is difficult so be careful. Plus it will make the brew want to boil over. FERMENTATION ================== Add to two 5-gallon fermenters and pitch with well-oxygenated culture of EL Old World Saison Blend. Once fermentation slows, transfer to secondary fermentation vessels. Add the EL Belgian Sour Mix at this time. Then forget about it! Check how it's fermenting in about a year.
Red Molly	American Amber Ale	22 Litres	1.049	1.011	4.94	27.35	19.89 °L	995	0
Author: Kanki Boil Size: 18 Litres Boil Time: 60 Boil Gravity: 1.059 Efficiency: 63 Mash Thickness: 3.6 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.35 Primary Temp: 19 ° C Priming Method: N/A Priming Amount: N/A Creation Date: 2/23/2017 1:02 PM Notes:
India Pale Ale	American IPA	20 Litres	1.071	1.017	7.15	74.26	9.6 °L	995	0
Author: liriodendron Boil Size: 30 Litres Boil Time: 60 Boil Gravity: 1.047 Efficiency: 70 Mash Thickness: 3 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.5 Primary Temp: 17 ° C Priming Method: dextrose Priming Amount: 140g Creation Date: 2/5/2017 11:32 PM Notes:
Nenna IPA Centennial	American IPA	18 Litres	1.062	1.012	6.54	66.36	6.47 °L	995	0
Author: FBorrego Boil Size: 25 Litres Boil Time: 60 Boil Gravity: 1.045 Efficiency: 70 Mash Thickness: 3.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.75 Primary Temp: 18 ° C Priming Method: Injection Priming Amount: 2ml (5.5g/L) priming sugar Creation Date: 12/21/2016 7:21 PM Notes: Fermentation (Primary): 18-19c until attenuation Fermentation (Secondary): 3 days with +1˚c per day until 21-22c Maturation: +10 days at 12.5-13.5c Cold Crash: +4days at 0.5c *c = celcius
Ginger Rye IPA	Specialty IPA: Rye IPA	5.6 Gallons	1.056	1.01	5.99	51.09	9.72 °L	995	0
Author: chewyheel Boil Size: 7 Gallons Boil Time: 75 Boil Gravity: 1.045 Efficiency: 66 Mash Thickness: 1.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.75 Primary Temp: 65 ° F Priming Method: N/A Priming Amount: N/A Creation Date: 12/21/2016 3:01 AM Notes: Ran off 7 gallons into boil, ended up with approximately 5.5 gallons of wort. Don't think I got as much wort as possible since rye seemed to clog mash tun a bit. Boil off was not as much as estimated by the calculator. Only 2 gallons from first runnings, 5 from second. All water used was spring water from Food Lion. Actual OG 10.056, 2 packs of rehydrated yeast pitched at around 67 degrees, stirred for 5 minutes.
Delta Skogtur	American IPA	21 Litres	1.064	1.015	6.37	89.58	10.72 °L	995	0
Author: Gløshaugen Bryggeforum Boil Size: 26 Litres Boil Time: 60 Boil Gravity: 1.052 Efficiency: 70 Mash Thickness: 3 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: N/A Primary Temp: 20 ° C Priming Method: Sukkerlake Priming Amount: 6g/liter Creation Date: 10/23/2016 2:13 PM Notes: 3g/10L CaSO_4 (kalsiumsulfat).
Tank 7 Sort Of	Saison	7 Gallons	1.061	0.999	8.07	60.92	3.43 °L	995	1
Author: RyDog Boil Size: 8 Gallons Boil Time: 90 Boil Gravity: 1.053 Efficiency: 75 Mash Thickness: N/A Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: N/A Primary Temp: 68 ° F Priming Method: N/A Priming Amount: N/A Creation Date: 8/28/2015 2:20 AM Notes: Very dry, surprisingly limited funkiness Very tasty Thanks Mr Finke for bringing the full grain setup 4 weeks in primary, last 7 days for dry hop If you take out the pacific gem you will have the original recipe. We just added for some more bitter/flavor.
Experimental Black Cherry Black IPA	Specialty IPA: Black IPA	5.5 Gallons	1.069	1.016	6.87	75.98	43.82 °L	995	0
Author: CogSpire Boil Size: 7.5 Gallons Boil Time: 90 Boil Gravity: 1.05 Efficiency: 75 Mash Thickness: 1.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: N/A Primary Temp: 63 ° F Priming Method: Demerera Priming Amount: 130 Creation Date: 7/28/2016 3:47 PM Notes: Cherries go whole, into the boil, not mash Cherry weight by what I have on hand Using S-04 because that was on hand at the time. Adjust recipe for future batches
Taco?	American Pale Ale	6 Gallons	1.05	1.01	5.31	61.28	3.82 °L	995	0
Author: viccali Boil Size: 8 Gallons Boil Time: 60 Boil Gravity: 1.038 Efficiency: 75 Mash Thickness: 1.45 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 1.0 Primary Temp: 66 ° F Priming Method: N/A Priming Amount: N/A Creation Date: 7/28/2016 1:56 PM Notes:
Tart Caramel Saison	Saison	6 Gallons	1.047	1.013	4.47	10.09	9.55 °L	995	0
Author: jpthier1020 Boil Size: 6.5 Gallons Boil Time: 60 Boil Gravity: 1.044 Efficiency: 73 Mash Thickness: 1.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: N/A Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 7/26/2016 1:45 AM Notes: Upon completion of Mash, Chill wort with coil chiller to room or outdoor temperature, and add unmilled grains. Kettle Sour for >= 2 days, then boil, add hops, chill with clean/sanitized coil chiller, and ferment with Saison yeast. Ferment at room temperature. 4.8 gallons, OG 1.040 -- Mashed, Wort was Chilled and Soured with intact 2-row grains 7/28/16. Boiled and hopped and yeast pitched 7/31/16.
IPL	Mixed-Style Beer	21 Litres	1.061	1.01	6.74	58.56	7.47 °L	995	0
Author: YoungBrewCo Boil Size: 30 Litres Boil Time: 90 Boil Gravity: 1.043 Efficiency: 68 Mash Thickness: 2.8 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 1.75 Primary Temp: 12 ° C Priming Method: N/A Priming Amount: N/A Creation Date: 6/30/2016 1:52 AM Notes:
Amarillo Pale Ale	American Pale Ale	5.5 Gallons	1.042	1.008	4.5	29.3	6.21 °L	995	0
Author: Ferris Brewer Boil Size: 7.5 Gallons Boil Time: 60 Boil Gravity: 1.031 Efficiency: 65 Mash Thickness: 1.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: N/A Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 6/16/2016 3:04 PM Notes:
Jazz Man IPA	American IPA	6 Gallons	1.059	1.016	5.61	141.41	8.24 °L	995	1
Author: Long Dog Brewery Boil Size: 8 Gallons Boil Time: 90 Boil Gravity: 1.044 Efficiency: 70 Mash Thickness: 1.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: N/A Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 1/11/2016 11:45 PM Notes:
9 Gallon Dubbel	Belgian Dubbel	9 Gallons	1.059	1.01	6.41	24.87	14.61 °L	995	0
Author: Phillip Davis Boil Size: 13 Gallons Boil Time: 120 Boil Gravity: 1.041 Efficiency: 65 Mash Thickness: 1.5 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: 0.75 Primary Temp: N/A Priming Method: N/A Priming Amount: N/A Creation Date: 12/8/2015 7:11 PM Notes: 12/8/2015-going to top off last Dubbel I did, and put over the dregs of the 003/048 Giga yeast I did with a Siason. That Siason is going to go over 5 gallons from this batch and with Bret Brux- might blend with the pale sour from the cab barrel once fermented and funked up? I'm also going to top off the rest of the outside barrels if I have enough too. 12/9- ended with 1.072 for SG
Awesome IPA	American IPA	24 Litres	1.066	1.011	7.17	104.5	7.4 °L	995	0
Author: Rompetom Boil Size: 30.5 Litres Boil Time: 60 Boil Gravity: 1.052 Efficiency: 70 Mash Thickness: 3 Sugar Scale: Specific Gravity Brew Method: All Grain Pitch Rate: N/A Primary Temp: 20 ° C Priming Method: N/A Priming Amount: N/A Creation Date: 11/25/2015 11:13 AM Notes:
Driveway Pale Ale	American Pale Ale	5.5 Gallons	1.05	1.012	4.97	34.63	6.27 °L	995	0
Author: Jeff72 Boil Size: 5.5 Gallons Boil Time: 60 Boil Gravity: 1.05 Efficiency: 60 Mash Thickness: N/A Sugar Scale: Specific Gravity Brew Method: Partial Mash Pitch Rate: 0.35 Primary Temp: 68 ° F Priming Method: N/A Priming Amount: N/A Creation Date: 11/5/2015 7:07 PM Notes:
« First ‹ Previous 1736 1737 1738 1739 1740 1741 1742 1743 1744 Next › Last »							Page 1740 of 15,651 20 Recipes of 313,010