All-grain Homebrew Beer Recipes | Page 4924 | Browse 225,000+ at Brewer's Friend

Author:

Boil Size: 180 Litres

Boil Time: 60

Boil Gravity: 10

Efficiency: 76

Mash Thickness: N/A

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 8/4/2019 10:00 PM

Notes:

Author:

interlockkfil

Boil Size: 8.5 Gallons

Boil Time: 60

Boil Gravity: 1.055

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/21/2018 2:06 PM

Notes:

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.032

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/13/2019 6:40 PM

Notes:

Author:

lostcook

Boil Size: 372 Gallons

Boil Time: 120

Boil Gravity: 1.089

Efficiency: 59

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 12/2/2019 10:50 PM

Notes:

Author:

TheGrainShed

Boil Size: 50 Gallons

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 57

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/11/2020 5:15 PM

Notes:

Author:

B0z22

Boil Size: 6 Gallons

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 72

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/20/2021 4:53 PM

Notes:

Author:

Boil Size: 14 Litres

Boil Time: 60

Boil Gravity: 1.082

Efficiency: 70

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 18 ° C

Priming Method: sucrose

Priming Amount: 91.4 g

Creation Date: 10/29/2020 10:09 PM

Notes:

Author:

Boil Size: 29 Litres

Boil Time: 90

Boil Gravity: 1.043

Efficiency: 72

Mash Thickness: 3.8

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 18 ° C

Priming Method: co2

Priming Amount: N/A

Creation Date: 11/28/2020 10:05 PM

Notes: Brewed 24/12/20

Pre-boil 1.046
OG 1.054

Pitched 25/12/20 at 18°C
Kegged 10/1/21

Small amount of diacetyl detected at kegging. Left keg out of fridge for a few days to clean up diacetyl.

2nd Place Babbs mini comp - January 2021 (Lagers)

Author:

happymonk

Boil Size: 6.5 Litres

Boil Time: 60

Boil Gravity: 1.044

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/13/2021 11:06 AM

Notes:

Author:

SaintTone

Boil Size: 15.24 Gallons

Boil Time: 45

Boil Gravity: 1.06

Efficiency: 70

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 68 ° F

Priming Method: co2

Priming Amount: 10.64 psi

Creation Date: 4/30/2024 2:21 PM

Notes:

Author:

Boil Size: 19.99 Litres

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 53

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 21 ° C

Priming Method: dextrose

Priming Amount: 157.6 g

Creation Date: 6/9/2023 8:32 PM

Notes:

Author:

rgrosholz

Boil Size: 8 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 73

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 75 ° F

Priming Method: co2

Priming Amount: 23.72 psi

Creation Date: 2/12/2023 8:23 PM

Notes: Under pitch (no starter) warm (80) and warm to 85 for primary. Cold crash at 1.015 to stop fermentation

Author:

Vidundertun

Boil Size: 25 Litres

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 75

Mash Thickness: 3.65

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 21 ° C

Priming Method: co2

Priming Amount: N/A

Creation Date: 1/31/2023 6:09 PM

Notes: Antioxin i mesk.

Gjær WLP 051 / WY 1272

Author:

JFCoppola

Boil Size: 7.1 Gallons

Boil Time: 30

Boil Gravity: 1.059

Efficiency: 74

Mash Thickness: 1.46

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 1.0

Primary Temp: N/A

Priming Method: sucrose

Priming Amount: 4.5 oz

Creation Date: 9/13/2021 6:15 PM

Notes: Start fermentation around 64 degrees and keep for 2 - 3 days then slowly raise to 68ish. The first couple of days is when polyphenols are developed. Starting at the low end of the temperate range produces fewer polyphenols.

Add dry hops after fermentation is finished and then raise to 72ish degrees till cold crash.

Author:

Segundo Lopez

Boil Size: 28.4 Litres

Boil Time: 60

Boil Gravity: 1.043

Efficiency: 69

Mash Thickness: 3.14

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 20 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/8/2020 4:23 PM

Notes:

Author:

Banaquaman

Boil Size: 7.28 Gallons

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 10/5/2020 3:28 PM

Notes: Steep the Hops after flame out for 20 Mins before chilling the wort

Author:

Nmcard

Boil Size: 30.5 Litres

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 60

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 32 ° C

Priming Method: N/A

Priming Amount: N/A

Creation Date: 8/10/2020 9:14 AM

Notes:

Author:

han

Boil Size: 46 Litres

Boil Time: 60

Boil Gravity: 1.048

Efficiency: 70

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 3/12/2020 2:16 AM

Notes:

Author:

WCWMatt

Boil Size: 13.9 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 90

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: co2

Priming Amount: 10.65 psi

Creation Date: 11/17/2019 10:39 PM

Notes: Water treated with brewing salts to our Hoppy New England flavour profile: Ca=100, Mg=18, Na=16, Cl=200, SO4=100 (Higher Chloride and lower Sulphate as compared to what is normally done with most American IPAs. This helps create the silky smooth and rich mouthfeel, pushing the hop flavours to be rounded and less sharp/dry). For complete details on how to adjust your water, refer to our step by step Water Adjustment guide.

The Flaked Oats (1-1.5L) do not need to be milled as they have already been rolled flat and toasted. Add them to the mash as is.

1.25 qt/lb mash thickness.

Single infusion mash at 160F for 90 mins.

While normal mash pH is typically 5.2-5.4 (when measured at mash temperature) you may want to aim on the higher end of this range to get a beer that is rounder/more full instead of sharp.

Raise to 168F mashout temperature and hold for 10 mins.

~90 min fly sparge with ~5.6-5.8 pH water (measured at mash temperature). At start of sparge add First Wort Hops to the boil kettle to let them steep as the wort is collected. Collect 13.9 gallons.

Boil for 60 minutes, adding Whirlfloc and hops per schedule at 15 and 5 minutes left.

Once boil is completed, quickly chill the wort to 180F (a copper immersion chiller works well - even the cheapest 25' x 3/8" immersion chiller will only take 2-3 minutes to chill from 212F to 180F). On our control panel, switch the BOIL PID to AUTO mode and set the temperature to 180F. This will hold the wort at 180F. Do not worry if you undershot the 180F target temperature slightly when chilling with the immersion chiller. Our control panel will quickly raise the temperature back to 180F and hold.

Add the steeping hops, put on the kettle lid, and wait 30 minutes. There is no need to stir the wort during this time. The control panel will fire the heating element periodically to maintain the 180F temperature which also gently stirs the wort through convection currents.

After the 30 minute steep turn off the heating element and chill the wort quickly to 66F (we use a one-pass convoluted counterflow chiller to quickly lock in hop flavour and aroma) and transfer to fermenter.

Aerate well. Pure oxygen from a tank may be used at a rate of 1 litre per minute for 60 seconds per 5 gallons.

Pitch yeast and ferment at 68F (wort temperature). I use modified stainless fermenting buckets in wine fridges.

Assuming you did not underpitch the yeast, after 24 hours you should be at high krausen (highest point of foaming). Add dry hops #1 directly to the fermenter.

Continue to ferment at 68F (wort temperature) until approximately 5 points from final gravity and then raise the temperature to 70-72F until finished. In our case we simply turn off the fermenting fridges and allow the beer to naturally rise to room temperature. Assume fermentation is done if the gravity does not change over ~3 days.

Add dry hops #2 to brite tank (we use 5 gallon glass carboys), purge with CO2 to avoid oxygen pickup, then carefully rack in the beer on top of the hops. Allow to steep for 3 days at 70-72F room temperature, gently swirling a few times a day. We do not recommend using hop sacks or other containers as you'll get the best flavour extraction from the hops if you let them roam free.

After 3 days in the brite tank package as you would normally. We rack to kegs that have first been purged with CO2, and then carbonate on the low side (around 2 volumes of CO2) to minimize carbonic bite and let the fruity hop and subtle malt flavours shine through. We chill the kegs to near freezing while carbonating at the same time in a 6-keg conditioning fridge. After ~1-2 weeks at serving pressure the kegs will be carbonated and ready to serve. Like most hop forward beers this New England Pale Ale is best consumed fresh so feel free to raise the CO2 pressure temporarily to 30-40 PSI to carbonate fast over a 24 period, and then turn back down to serving pressure. Some hop bits will have invariably made their way into the keg so we use a Hop Stopper Keg Edition filter to ensure that hops do not clog the dip tube and/or end up in the glass. Force carbonating at high pressure and using the Hop Stopper filter allows us to serve this beer 24 hours after kegging. There's no need to wait a few days for any hop bits that made their way into the keg to first settle out.

We do not recommend using finings such as unflavoured gelatin as it may "round off" hop flavours / aromas.