Hops
|
Amount
|
Variety
|
Cost
|
Type
|
AA
|
Use
|
Time
|
IBU
|
Bill %
|
|
1.25 oz |
Wye Target1.25 oz Wye Target Hops |
|
Pellet |
8.8 |
First Wort
|
0 min |
10.61 |
55.6% |
|
1 oz |
Progress1 oz Progress Hops |
|
Leaf/Whole |
6 |
Boil
|
30 min |
3.67 |
44.4% |
|
2.25 oz
/ $ 0.00
|
Hops Summary
|
Amount
|
Variety
|
Cost
|
IBU
|
Bill %
|
|
1.25 oz |
Wye Target (Pellet) 1.2499999971407 oz Wye Target (Pellet) Hops |
|
10.61 |
55.6% |
|
1 oz |
Progress (Leaf/Whole) 0.99999999771257 oz Progress (Leaf/Whole) Hops |
|
3.67 |
44.4% |
|
2.25 oz
/ $ 0.00
|
Mash Guidelines
|
Amount
|
Description
|
Type
|
Start Temp
|
Target Temp
|
Time
|
|
10.5 gal |
|
Strike |
163 °F |
152 °F |
60 min |
Starting Mash Thickness:
1.5 qt/lb
Starting Grain Temp:
72 °F |
Yeast
|
Wyeast - Whitbread Ale 1099
|
|
Amount:
|
1 Each |
Cost:
|
|
|
Attenuation (avg):
|
70%
|
Flocculation:
|
High |
|
Optimum Temp:
|
64 - 75 °F |
Starter:
|
No |
|
Fermentation Temp:
|
-
|
Pitch Rate:
|
0.35 (M cells / ml / ° P)
299 B cells required
|
|
|
Wyeast - Thames Valley Ale 1275
|
|
Amount:
|
1 Each |
Cost:
|
|
|
Attenuation (avg):
|
77%
|
Flocculation:
|
Med-Low |
|
Optimum Temp:
|
62 - 72 °F |
Starter:
|
No |
|
Fermentation Temp:
|
-
|
Pitch Rate:
|
0.35 (M cells / ml / ° P)
299 B cells required
|
|
|
Wyeast - London Ale III 1318
|
|
Amount:
|
1 Each |
Cost:
|
|
|
Attenuation (avg):
|
73%
|
Flocculation:
|
High |
|
Optimum Temp:
|
64 - 74 °F |
Starter:
|
No |
|
Fermentation Temp:
|
-
|
Pitch Rate:
|
0.35 (M cells / ml / ° P)
299 B cells required
|
|
|
$ 0.00
Yeast Pitch Rate and Starter Calculator
|
Target Water Profile
Reverse osmosis water
Notes
Special Instructions / Notes:
Ok.. so we were the last ones to start, first ones to post our recipe. (Advantage: Webmaster) But seriously, all of the equiptment for our system showed up at 9 am. By 9:45 we'd cobbled together the CDJK mobile brewing system.
Mash water was acidified using lactic acid and quickly heated to ~160F. This was dumped into Kent's lauter tun. And all the grain was mixed in to a settle at a temp of about 148F.
Sparge water was then heated up and acidified. (In the process the poor cap of my ph meter was sacrificed to Kent's mad burner.)
Recirc was quick and painless. Sparge then occured over the next hour as we ran off into a grant and then pumped into the boil kettle with the Target hops already present.
As we gathered more liquid than we had space for, (Part of the plan) we began running the first runoff into the second kettle.
The boil proceeded fairly normally (w/ one near boilover thanks to Jim's burners massive BTU output)
5 Minutes from the end we added the brown sugar. This sugar had been sampled by a number of people that morning and was acclaimed as a great sugar for an English beer. (Available at this time at Trader Joe's )
We sanitized the chiller and pump while we figured how, since we'd boiled in 2 pots, to balance the batch. We ended up using the pump as a mixer between the two pots. Once done for a sufficent period, ~10 minutes.
Chilling accomplished, we then ran boiled water through the chiller to dilute our batches down. We moved indoors to oxygenate and pitch our yeasts. Thanks to the Rhudes for pitching in another tank of O2 when mine ran out. Jim Kopitzke pitched his batch with London III. Cullen pitched Thames Valley. Kent and I (Drew) pitched with the Whitbread yeast. Kent elected to keep his batch at close to the original output strength (1.049).
Last Updated and Sharing
- Public: Yup, Shared
- Last Updated: 2021-09-04 07:16 UTC
For quick copying and pasting to a text based forum or email.
Click the Download as HTML file button below.
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
|
Cost $ |
Cost % |
| Fermentables |
$ |
|
Steeping Grains
(Extract Only) |
$ |
|
| Hops |
$ |
|
| Yeast |
$ |
|
| Other |
$ |
|
| Cost Per Barrel |
$ 0.00 |
|
| Cost Per Pint |
$ 0.00 |
|
| Total Cost |
$ 0.00 |
|
Discussion about this recipe:
Recipe Tools ▼
Brew!
