All-grain Homebrew Beer Recipes | Page 4746 | Browse 225,000+ at Brewer's Friend

Author:

Vinyasa

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.063

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: dextrose

Priming Amount: 5.2 oz

Creation Date: 12/28/2020 6:29 PM

Notes: Similar to DogfishHead 90 minute IPA

I hope...

Author:

Junkermeier

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.038

Efficiency: 46

Mash Thickness: 1.3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 68 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/21/2024 7:04 PM

Notes: 5.35 post boil ph.
20 brix OG.
Airlock smells great.
8 brix FG.
The London ale yeast made a massive haze(typical with highly hopped beers) and some banana esters. This would be much better without the caramunich and 60L.
Fruity and pine notes.
Smooth and drinks easy.
If I made this again I'd use 05 or 1056 yeast and add a bit more bittering hops.

Author:

Brewman Martin

Boil Size: 30.38 Gallons

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 74.15

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/13/2023 9:09 PM

Notes:

Author:

Brau Hans Bier

Boil Size: 65 Litres

Boil Time: 90

Boil Gravity: 1.046

Efficiency: 85

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 17 ° C

Priming Method: co2

Priming Amount: 0.6

Creation Date: 4/24/2023 8:48 PM

Notes: Si esta cerveza te gusto o no, no volverá a repetirse!
Cada lote es único e irrepetible! Es Artesanal!

Notas de Cocción:
Inicio el macerado y corrijo pH, Ok, clavado en 5.2!
Luego de 30 minutos comienzo a recircular por otros 90 minutos para lograr un mostro cristalino.
Comienza la etapa del lavado, mientras envío el mosto a la olla de hervor. Malas noticias... el mechero no me calienta el mosto a mas de 95°C... Decido hervir mas tiempo. Objetivo: Subir mas la densidad y que coagulen bien las proteínas. A su vez, busco que se evaporen compuestos no deseados.
Luego de 2 Hs, al preparar el fermentador, arme mal las canillas y me perdían tuve que hacer malabares se me rompió la torta del trub en la olla de hervor... aprox 6 litros de merma en total...
Termine con 51 litros (de los 56/57 esperados)...
Prepare las levaduras, hidratándolas y las inocule a 21°C (prefiero inocular en 18/19... pero no llegue a enfriar tanto (punto a mejorar).
A las 8 Hs ya había actividad en el airlock! A las 24 Hs el pH ya había bajado a 4.5
Al 3 día, con la densidad en 1.016, realizo el Dry Hop (que aromas!!!) y le libero la temperatura al fermentador hasta que llegue a 20°C (Fermenté a 17°C)
Al 5° día, inicio cold crush de a etapas. (1° a 12°C, luego a 8°C y por ultimo 2°C durante 2 días)
Bajo a barriles, clarifico con gelatina sin sabor (ya no es mas vegana esta cerveza... perdón). Conecto CO2 en los barriles y los dejo a 1°C por 5 días. Son barriles de 20 litros, y por experiencia se que tardan 3 días en carbonatar!
Dia 13: Mido pH 4.3 y densidad 1.011.
Quedo HERMOSA!!! Clara, cristalina, aromática, muy sabrosa. Todavía faltan detalles a mejorar, pero estoy muy conforme con el resultado.

Observaciones:
Tengo que mejorar el agua de proceso para bajar los sulfatos y que no se realce tanto el amargor del lúpulo.
Por otro lado, mejorar el mechero de la olla de hervor.
Y las canillas del fermentador (siempre son un problema... pero esta vez fue error mío - Check).

Si leíste hasta acá, bienvenida/o al mundo de la cerveza! Te aseguro que es un viaje de ida!
A disfrutar cada copa, de forma responsable, y creando un contexto que aumente la sensación de satisfacción (en soledad, en pareja, con amigos, en familia, pero siempre disfrutando este noble producto!).

Consejos:
Lavá bien el vaso o copa, con una esponja especial para tus vasos. Enjuagalo y servi la cerveza entre 4 y 6°C, con espuma!
Miralo, senti el aroma, toma un trago, y respira! (si, eso se llama placer!)
IMPORTANTE tomar agua entre copas.

Prost! Y por mas cultura cervecera!

HANS...

Author:

Aeon Brewing

Boil Size: 121.98 Litres

Boil Time: 60

Boil Gravity: 1.054

Efficiency: 85

Mash Thickness: 3.65

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 16 ° C

Priming Method: co2

Priming Amount: 1.64 bar

Creation Date: 3/14/2023 1:49 PM

Notes: 3:30 - mash start @72c went down to 69 after re warming the bottom
5:30 boil start - 1.047gravity - hop adition made, no boil off
6:20 - brewshield180ml, irish moss 1tblspoon, wirlpool start hop addition.
cooled worth, added dry yeast and aireate 20 minutes

Author:

Karissa & Robert

Boil Size: 6.35 Gallons

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 80

Mash Thickness: 1.25

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: 66 ° F

Priming Method: co2

Priming Amount: 10.69 psi

Creation Date: 1/31/2023 6:47 AM

Notes: Ferment at 66 for 9 days

Author:

CitraAvenue

Boil Size: 28.5 Litres

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/14/2022 1:08 PM

Notes:

Author:

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.115

Efficiency: 75

Mash Thickness: N/A

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 4/3/2022 8:13 PM

Notes:

Author:

Dougie Orr

Boil Size: 33 Litres

Boil Time: 90

Boil Gravity: 1.041

Efficiency: 80

Mash Thickness: 2.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 1/14/2022 8:21 PM

Notes:

Author:

petedocker

Boil Size: 800 Litres

Boil Time: 60

Boil Gravity: 1.1

Efficiency: 85

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 11/23/2021 8:41 AM

Notes:

Author:

Boil Size: 18 Gallons

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 80

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.5

Primary Temp: 70 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/1/2018 3:15 AM

Notes:

Author:

RustyBarrelHomebrewing

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.051

Efficiency: 68

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/21/2020 6:18 PM

Notes: ===================================
7/14/2020:
just adjusted the water profile in the calculator for 8.5 total gallons treated water and the numbers came out a little better. however a little concerned because the calculator says mash pH will be 5.6 but this recipe says 5.45. i suppose either is fine but the inconsistency is making me nervous that im screwing something up.

going forward i think it will be simpler to use RO and build from there, or try to see if there are basic / minor adjustments i can make to my water to get where i want to go (e.g. just a simple gypsum addition andor campden tab)
===================================
7/13/2020:
adjusting the hop bill based on what i have. increasing ibu from last time (this time using cryo warrior!) decided to try to use all 8oz of centennial i have from a particular Washington state farm via hop of the month. will have increased dry hop.

even though im planning to use hothead (quick turnaround) i noticed in the last brew the beer tasted great initially, then diminished, then peaked later. as such maybe try to ferment for 7 days, dry hop 3 or 4 days in, remove dry hop and cold crash for 7 days before kegging...?
===================================
6/21/2020:

for this 4th attempt at west coast this year, i will be experimenting getting to some target water profile good for west coast ipas.

for now i am going to use the light & hoppy profile built into brewers friend. the chloride cl- is high for the profile (but normal overall) but i think the only way to reduce that is to use RO water so i will just leave it. going to use gypsum (to add calcium) and phosphoric acid to reduce mash pH. we'll see

here is another reference :
https://shop.theelectricbrewery.com/pages/green-flash-west-coast-ipa

===================================
6/21/2020:
this still came out 1.010 but not dry or crisp but rather sweetish. going to take a look at water chemistry next time. (this beer was just brewed using untreated henrico va tap water)

the beer also came out hazy, orangeish. and possibly oxygenated probably because it got roughed up during dry hop / packaging stages as it was my first time dealing with the conical fermentor and spunding valve.

===================================
5/31/2020:
changing grain bill to bump sugar up from 0.5 to 1lb to try to get more dryness. ive read you can do up to 10% sugar. (they say dexrose but im just using table sugar)

also changing hop sched based on the hops i have. i was planning to use some crystal wet hops for this batch but id prefer to use them all at once 2.2 lbs which i think is going to take up a lot of loss, also i am brewing this for the first time on digiboil which may have boiling limitations so im going to fall back and just use some centennial from my hop of the month club. id prefer to use all of one so i can see if i can get the different flavor profiles....
(should i do smaller batches so i can do side by side-ish? if that, ferment in a keg with spunding valve?).
will plan to use the nugget for bittering instead of warrior.....well see.
============================================
5/7/2020:
recipe cloned from "i aint mad atcha". changing recipe in prep to rebrew. simplifying hop varieties. lowering abv a little, removing 15L. aiming for 80 some ibu again. going to mash a little lower? 150. using hothead yeast.

4/7/2020 :
brew day. swapping out the 0.9 magnum 14aa 60 min for 0.5 warrior unknown AA and 0.5 nugget 13.4AA both for 60 mins. this adds up to more IBU than it was with the magnum, but the byo article has it at 77IBU. also i am using some 2 oz 11.4AA 2018 whole hop centennial for the 15 min addition. these hops were leftover from something else, hopefully not oxidized or anything. this way i can add 2 more oz to the dry hop for more flaves. inputting the whole hop AA brought the recipe up to 77IBU. ALSO on a whim i decided to drop a pound of 2row and add .5lb cane sugar to dry it out a little bit. still doing the .5lb 15L (original byo recipe had a pound but last rendition was too sweet). if this all works according to plan i think it will be a nice beer. not sure if i am going to get close to stone. i had a stone ipa the other night. it was too dry and bitter compared to mine. looking for something in between theirs and mine.

3/31/2020:
today i am bumping the magnum and base malt amounts to increase the target IBU and OG to match the BYO article. i am blindly changing the attenuation to match the BYO FG.

this beer was weird. right now it is clear, faint bitterness, decent hop flavor, overall seems close. it is a little too sweet.

this was fermenting at a bit low temperature last month. it was in the fermentation chamber while we were away on vacay but it wasnt plugged in. when i returned it was around 50 or 55. i did cold crash it and kegged it, first week or two it was super hazy and sweet it threw me way off, i thought id confused it with mango maya base beer. it cleared up, hops began to shine more. over time

i had a recipe snafu. unsure the OG. FG is about 1.014. based on 12.5lb 2 row and adjusting attenuation for the FG i got about 6.48 abv on batch 1 (march2020)

8/26/2019 :
adapted from brew your own clone recipe. unclear when this appeared in print. https://byo.com/recipe/stone-ipa-clone/

they boil for 90 minutes (probably to get more bitterness out of less hops, those smarties) they also use perle + magnum but i will just use enough magnum for 60 mins to get up to IBU. the recipe calls for whole hops for dry hop but that will depend on availability / convenience...

Author:

Cain Piper

Boil Size: 6.2 Litres

Boil Time: 60

Boil Gravity: 1.037

Efficiency: 75

Mash Thickness: 3

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 9/13/2019 10:03 PM

Notes:

Author:

Shed Village Brad

Boil Size: 85.5 Litres

Boil Time: 90

Boil Gravity: 12.2

Efficiency: 70

Mash Thickness: 2.5

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: co2

Priming Amount: N/A

Creation Date: 9/6/2019 5:38 PM

Notes:

Author:

kjfst11

Boil Size: 7.5 Gallons

Boil Time: 60

Boil Gravity: 1.047

Efficiency: 71

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 6/7/2019 4:01 AM

Notes:

Author:

Jericho Brew

Boil Size: 12.4 Gallons

Boil Time: 60

Boil Gravity: 1.046

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.75

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/30/2019 8:10 PM

Notes:

Author:

Roof Tap Brews

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.059

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 4/13/2019 2:23 AM

Notes:

Author:

Botefuhr Brew House

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.056

Efficiency: 75

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: 0.35

Primary Temp: N/A

Priming Method: N/A

Priming Amount: N/A

Creation Date: 2/10/2019 4:22 PM

Notes:

Author:

Keeton

Boil Size: 420 Gallons

Boil Time: 60

Boil Gravity: 13.4

Efficiency: 100

Mash Thickness: 1.5

Sugar Scale: Plato

Brew Method: All Grain

Pitch Rate: 1.25

Primary Temp: 66 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 1/14/2019 9:19 PM

Notes:

Author:

Chaos home brewing

Boil Size: 6.5 Gallons

Boil Time: 60

Boil Gravity: 1.053

Efficiency: 70

Mash Thickness: 1.5

Sugar Scale: Specific Gravity

Brew Method: All Grain

Pitch Rate: N/A

Primary Temp: 65 ° F

Priming Method: N/A

Priming Amount: N/A

Creation Date: 5/4/2018 11:51 PM

Notes: