Cream Brew Stout Beer Recipe | All Grain Sweet Stout | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

Cream Brew Stout

225 calories 27 g 12 oz
Beer Stats
Method: All Grain
Style: Sweet Stout
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 7 gallons
Post Boil Size: 5.8 gallons
Pre Boil Gravity: 1.053 (recipe based estimate)
Post Boil Gravity: 1.064 (recipe based estimate)
Efficiency: 80% (brew house)
Calories: 225 calories (Per 12oz)
Carbs: 27 g (Per 12oz)
Created: Saturday October 19th 2019
1.067
1.022
6.4%
20.8
44.2
5.5
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
8.80 lb United Kingdom - Maris Otter Pale8.8 lb Maris Otter Pale 38 3.75 71.2%
14 oz United Kingdom - Black Patent14 oz Black Patent 27 525 7.1%
11 oz United Kingdom - Dark Crystal 80L11 oz Dark Crystal 80L 33 80 5.6%
17 oz United Kingdom - Pale Chocolate17 oz Pale Chocolate 33 207 8.6%
15 oz Lactose (Milk Sugar)15 oz Lactose (Milk Sugar) 41 1 7.6%
197.80 oz / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
35 g Kent Goldings35 g Kent Goldings Hops Pellet 5 Boil 60 min 20.76 100%
35 g / 0.00
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
Single Infusion Mash Infusion 151 °F 168 °F 60 min
Starting Mash Thickness: 1.5 qt/lb
 
Yeast
White Labs - Bedford British WLP006
Amount:
1 Each
Cost:
Attenuation (avg):
76%
Flocculation:
High
Optimum Temp:
65 - 70 °F
Starter:
No
Fermentation Temp:
68 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 119 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       Amount: 14.26 psi       Temp: 68 °F       CO2 Level: 1.65 Volumes
 
Target Water Profile
Parent's House
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Notes

Used this to get style guidance

https://byo.com/article/sweet-stout-style-profile/

Mill the grains and dough-in targeting a mash of around 1.5 quarts of water to 1 pound of grain (a liquor-to-grist ratio of about 3:1 by weight) and a temperature of 151 °F (66 °C). Hold the mash at 151 °F (66 °C) until enzymatic conversion is complete. Infuse the mash with near-boiling water while stirring or with a recirculating mash system raise the temperature to mash out at 168 °F (76 °C). Sparge slowly with 170 °F (77 °C) water, collecting wort until the pre-boil kettle volume is around 5.9 gallons (22.3 L) and a gravity of 1.051 (12.6 °P).

The total wort boil time is 60 minutes. I prefer to mix in the lactose with the first runnings, which gives me lots of time to make sure it gets dissolved before firing up the kettle. Add the first hop addition as soon as the wort reaches a full boil and then start your timer. Add Irish moss or other kettle finings with 15 minutes left in the boil.

Chill the wort to 68 °F (20 °C) and aerate thoroughly. The proper pitch rate is 2 packages of liquid yeast or 1 package of liquid yeast in a 2-liter starter. Ferment at 68 °F (20 °C). When finished, carbonate the beer to approximately 1.5 to 2 volumes.

Added Wyeast 1099 (Whitbread Ale) yeast as a backup if White Labs Bedford British WLP006 isn't available.

Brewer's Friend Logo
Last Updated and Sharing
 
242
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-10-26 03:20 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top