TyNoDollaSign Imperial Black IPA Beer Recipe | All Grain Specialty IPA: Black IPA | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

TyNoDollaSign Imperial Black IPA

287 calories 24.6 g 12 oz
Beer Stats
Method: All Grain
Style: Specialty IPA: Black IPA
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 8 gallons
Post Boil Size: 6 gallons
Pre Boil Gravity: 1.066 (recipe based estimate)
Post Boil Gravity: 1.087 (recipe based estimate)
Efficiency: 63% (brew house)
Calories: 287 calories (Per 12oz)
Carbs: 24.6 g (Per 12oz)
Created: Monday February 28th 2022
1.087
1.015
9.5%
53.6
29.8
5.4
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
8 lb US - Pale 2-Row8 lb Pale 2-Row 37 1.8 42.1%
7 lb American - White Wheat7 lb White Wheat 40 2.8 36.8%
0.75 lb Flaked Oats0.75 lb Flaked Oats 33 2.2 3.9%
8 oz American - Carapils (Dextrine Malt)8 oz Carapils (Dextrine Malt) 33 1.8 2.6%
1.50 lb Cane Sugar1.5 lb Cane Sugar 46 0 7.9%
12 oz Weyermann - Carafa Special Type III12 oz Carafa Special Type III 29.9 525 3.9%
8 oz German - Acidulated Malt8 oz Acidulated Malt 27 3.4 2.6%
19 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
4 oz Citra / Mosaic4 oz Citra / Mosaic Hops Pellet 11 Boil 5 min 26.36 25%
4 oz Citra / Mosaic4 oz Citra / Mosaic Hops Pellet 10 Whirlpool 0 min 27.24 25%
4 oz Citra / Mosaic4 oz Citra / Mosaic Hops Pellet 10 Dry Hop (High Krausen) 3 days 25%
4 oz Citra / Mosaic4 oz Citra / Mosaic Hops Pellet 10 Dry Hop 3 days 25%
16 oz / 0.00
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
5.78 gal Strike 164 °F 152 °F 60 min
Starting Mash Thickness: 1.25 qt/lb
Starting Grain Temp: 80 °F
 
Yeast
Omega Yeast Labs - HotHead Ale OYL-057
Amount:
1 Each
Cost:
Attenuation (custom):
79%
Flocculation:
Medium High
Optimum Temp:
62 - 98 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.35 (M cells / ml / ° P) 152 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.25 Volumes
 
Target Water Profile
henrico county va 23233 feb 2022
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
24 5 26 12 17 52
Mash Chemistry and Brewing Water Calculator
 
Notes

=============================
2/28/2022

Idea here is a big juicy east coast style ipa but black. borrowing from oakshire imperial odark description
https://www.youtube.com/watch?v=ztkW9v7j3Qo
and
https://oakbrew.com/beers/imperial-odark/
they said specifically they use Weyermann Carafa Special 3

Adjusted recipe here and there. added debittered black malt for color and sugar / base malt adjustments for abv. i think aiming for 9 would be better than 10...

citra mosaic combo for now. might need a little bit of bittering hop to balance high maltiness? or will we get enough from the black malt?

BFC used hothead although nervous using it again here in a dark beer (several mona lisa batches came out weird but that was with unproved malt bill).

could go with standard us05 or london with big starter. or lutra for cleaner profile but since this is a fruity ipa hothead could work hoping it doesnt get stressed.

**************
COPIED FROM BIG FAT CATERPILLAR. 2/28/2022
**************
=============================
2/11/22 kegged. Fg 9.5 brix with 1.06 wort correction looks like 1.014 for 7.86%abv not bad.
=============================
2/7/2022
brew day was a pain in the ass. tried using biab bag but mash was still stuck on and off, pump on and off, temps all over the place. removed the bag but still stuck. i think the oats.

then the pump was again stuck on knockout, could not get it to work at all. had to siphon the wort out the top and strain with hand strainer smh.

but we got an OG of 1074 for 5.5 gallons - this recipe minus the oats shouldve been 1076 so this counts as pretty close to spot on. so updating the efficiency now from 65 to 58. to reflect this so next time wont have to do this wonky math.

original projected abv was 8.5 but we deliberately over estimated. updated recipe projected abv of 7.8 we were shooting for 8.0

==============================
2/1/2022
bout to rebrew this for tre bday. adjusting volumes and efficiency for most up to date stats. gonna use hothead for time constraint.

could consider pulling some voss off the wheat beer and use that? its not performing so vigorously on the wheat though

==============================
12/3/2021
did not take down FG. the beer tasted amazing but turned brown after about a week. mustve oxidized during kegging or carbonating (shook keg) but it really tasted great, a lot of tropical fruity flavor and smell. not sure what hops are in this blend. detected a small amount of galaxy in it.

==============================
10/5/2021
Brew day. Updating to 68% efficiency for 1080 OG. Not sure volume tho

==============================
10/4/2021
removing DME. this will be the first brew on the grainfather so im hoping to not get abysmal efficiency - predicting/bumping efficiency up from 52 to 63 for 7.8%abv.

also starting from primo (RO?) water and building to "light colored and hoppy" BF profile.
==============================
9/30/21
BRANCHING OFF ZAMBA HAZY FOR SITIVA HAZY

pretty much going to brew it the exact same grain bill and hop profile, may leave out the warrior, and using rva 132 instead of kveik.

TODO : need to fill in AA on sitiva

==============================
6/17/21
1.015 measured FG on 6/17/21 for 7.75%abv

==============================
6/10/2021
Brew day. Ended up with too much wort, again. Forgot to cook oats but I did double crush. Still only got 50% eff wtf. Adding 2 lb dme to try to save it. Adjusting the attenuation to convince myself kviek will go down to 1012 and 8%. Bad brew day

==============================
5/14/2021
Initial recipe creation,
grain bill : copying DRIP 3. boosting a little bit. changing eff to 60 i think we should be able to do that especially with cooked oatmeal. pay more attention to volumes. try not to end up with too much wort!

hops : will feature zamba. single hop. composing schedule based on blueberry yum yum. even split between 5 min, flameout, high krausen and standard dry hop (maybe keg)

yeast : prob would be better with london, but will consider kviek

water : thinking i will use tap. acid malt for pH. we have observed better results in west coast with water adjustments, maybe we try here too?

==============================
2/3/2021. Did not make it into feb. Its about 40 days since it was kegged, less than that since canned. The canned beer stoll looks nice and smells and tastes better than some commercial stuff but it's too bitter and lost a lot of spunk. For this next time I think we need to nail down the gravity, nail down the ph. Ditch the warrior and do like a full lb total hops and do like 1/3 hop bill in whirlpool. Try to limit oxidation in transfers but I dont think that is the main problem here. Consider doing some water adjustments. I wonder how the west coast ipa water profile would do for this.
==============================
12212020 updating recipe here to reflect what i did. please reference previous versions of this recipe for the original/correct recipe. realized i didnt have any real citra during brew day so i overloaded on mosaic and used a little citra noble. then in dry hop i did something off script as well cant remember what but i think i mightve done 4 oz citra and 2 oz mosaic?

efficiency was bad, target 1072 actual 1065. bad ph reading. not sure what happened but maybe some issue with water. need to examine water profile from tap and/or build a custom profile from scratch.
==============================
12162020 recipe was drastically changed. Bad ph (4.97. wtf?) on brew day and wrong hops. Anyway also used London 3 new pack with 1 day starter expected 1017 FG instead of reused hothead 1010 FG changing that now.
==============================
11/23/2020
planning for brew 3. last one was indeed way off, not sure why, see theories below. this time bumping up 2row and wheat to get to 8%. thinking about switching from kviek and use regular london just because of my chamber and compatibility with other stuff going on. also thinking about possibly modifying water profile. thinking about brewing 10 gals eek. possibly bumping up the hops?
===============================
10/2/2020
kegged this a couple days ago. really hot with hop burn. and kind of a rubber smell and taste. i wonder if i pushed this kveik too far. also i have not been cleaning it from trub and it could possibly have gelatin protein gunk it in? not sure. prob need to start again with a fresh pitch. anyway the first pint was pretty bad tasting and the second i drank last night was also but a little better. maybe hop burn will subside. its only about 10 or 11 days out from brew day. some ipas taste better after a couple weeks. maybe itll improve.
===============================
9/9/2020
bumped up 2 row from 7.5 to 9.5, boosted up oats. not sure how efficiency will be but im assuming 65% without the oats factored in. with oats added im assuming it drops to 55. could be wrong. maybe the gravity is the problem.

added 4 more oz hops.

TODO : should figure out water...
this has sample profile but has bicarbonate instead of alkalinity :
https://www.clawhammersupply.com/blogs/moonshine-still-blog/juicy-neipa-new-england-ipa-recipe

maybe think about searching brewersfriend for one

===============================
6/28/2020
brewed tue 6/23
dry hopped fri 6/26
cold crash sun 6/28
keg & carb mon 6/29
can tue 6/30


im not finding any research on kveik needing cleanup / diacetyl rest time after terminal gravity?? some places are saying you can rack it 36-72 hours after pitch

===============================

this one is a combination of the hop profile of all the rage

Recipe Picture
Last Updated and Sharing
 
412
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2022-02-28 16:11 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top