GranPaD's NEIPA #2 - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

GranPaD's NEIPA #2

209 calories 22.5 g 12 oz
brewer logo
Beer Stats
Method: BIAB
Style: Specialty IPA: New England IPA
Boil Time: 60 min
Batch Size: 6 gallons (fermentor volume)
Pre Boil Size: 7.67 gallons
Post Boil Size: 6.42 gallons
Pre Boil Gravity: 1.053 (recipe based estimate)
Post Boil Gravity: 1.063 (recipe based estimate)
Efficiency: 78% (brew house)
Source: GranPaD
Hop Utilization: 97%
Calories: 209 calories (Per 12oz)
Carbs: 22.5 g (Per 12oz)
Created: Saturday November 6th 2021
1.063
1.017
6.0%
42.7
4.9
5.2
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
5 lb Briess - Brewers Malt 2-Row5 lb Brewers Malt 2-Row 37 1.8 37.7%
6 lb Simpsons - Finest Pale Ale Golden Promise6 lb Finest Pale Ale Golden Promise 37 2.4 45.3%
0.25 lb Flaked Oats0.25 lb Flaked Oats 33 2.2 1.9%
0.50 lb Flaked Wheat0.5 lb Flaked Wheat 34 2 3.8%
0.25 lb Gambrinus - Honey Malt0.25 lb Honey Malt 37 25 1.9%
0.25 lb Flaked Barley0.25 lb Flaked Barley 32 2.2 1.9%
1 lb Weyermann - Pale Wheat1 lb Pale Wheat 36 2 7.5%
13.25 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.75 oz Yakima Chief Hops - Citra0.75 oz Citra Hops Pellet 13 First Wort at 150 °F 60 min 32.12 10%
0.75 oz Yakima Chief Hops - Citra0.75 oz Citra Hops Pellet 13 Boil at 212 °F 10 min 10.59 10%
3 oz Yakima Chief Hops - Citra LupuLN2 (Cryo)3 oz Citra LupuLN2 (Cryo) Hops Lupulin Pellet 25 Whirlpool at 108 °F 60 min 40%
3 oz Yakima Chief Hops - Citra LupuLN2 (Cryo)3 oz Citra LupuLN2 (Cryo) Hops Lupulin Pellet 25 Dry Hop 4 days 40%
7.50 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
0.50 g Calcium Chloride (anhydrous) Water Agt Mash 1 hr.
9 g Epsom Salt Water Agt Mash 1 hr.
2.50 g Gypsum Water Agt Mash 1 hr.
6 g Salt Water Agt Mash 1 hr.
9 g Citric acid Water Agt Mash --
 
Yeast
Fermentis - Safale - English Ale Yeast S-04
Amount:
2 Each
Cost:
Attenuation (avg):
75%
Flocculation:
High
Optimum Temp:
54 - 77 °F
Starter:
No
Fermentation Temp:
-
Pitch Rate:
0.5 (M cells / ml / ° P) 175 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
Method: co2       Amount: 8.73 psi       Temp: 34 °F       CO2 Level: 2.45 Volumes
 
Target Water Profile
RO GrandpaD
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
15 26 78 120 140 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
8.5 gal 28 qt@166F/Grain temp. est. 45 F Strike 166 °F 156 °F 60 min
Quick Water Requirements
Water Gallons  Quarts
Strike water volume 9.58 38.3  
Mash volume with grains 10.64 42.5  
Grain absorption losses -1.66 -6.6  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume 7.67 30.7  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.06 -0.2  
Post boil Volume (equipment estimates 6.11 g | 24.5 qt) 6.42 25.7  
Hops absorption losses (whirlpool, hop stand) -0.11 -0.5  
WARNING: Exceeded batch size - reduce boil size    
Volume into fermentor (equipment estimates 6.31 g | 25.2 qt) 6 24  
Total: 9.58 38.3
Equipment Profile Used: System Default
 
Notes

Cool with chiller to 108 F, stop chiller, add whirlpool hop, hold 60 minutes at 108 F. then chill as normal to 75 F. Pitch dry yeast at 70 - 75 F, then cool to 64 F @ 5 deg. F/day after 12-24 hours. Hold at 64 deg F for remainder of active fermentation, then di-acetyl rest for several days at 70 deg F, just before end of fermentation, specific gravity around 1.02.
Leave fermenter covered with foil during initial fermentation, until adding dry hops. Dry hop in Primary after high Krausen, about 3 - 4 days after pitching yeast, and before fermentation is complete, i.e. should still be seeing activity of yeast, specific gravity at around 1.03. Add airlock after dry hop. Cool to 35 F for several days in Primary after fermentation is complete, then use a closed transfer to a purged keg.

Last Updated and Sharing
 
278
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-12-07 02:11 UTC