Brew Log History
Ambient: {{ stats.ambient | number:0 }} °F
OG: {{ stats.ogGravity | number:3 }}
Attenuation: {{ stats.attenuation | number:2 }}%
Calories: {{ stats.calories | number:1 }} / 12oz
Carbs: {{ stats.carbs | number:1 }} g / 12oz
Readings: {{ readingsCount | number }}
{{ formatHeaderDate(dates.navStart) | date:'mediumDate' }} to {{ formatHeaderDate(dates.navEnd) | date:'mediumDate' }}
Last Updated: {{ stats.lastupdated.ago }} from {{ stats.lastupdated.source }}
Hops
|
Amount
|
Variety
|
Cost
|
Type
|
AA
|
Use
|
Time
|
IBU
|
Bill %
|
|
0.80 oz |
Columbus0.8 oz Columbus Hops |
|
Pellet |
15 |
Boil
|
60 min |
46.07 |
44.4% |
|
1 oz |
Fuggles1 oz Fuggles Hops |
|
Pellet |
4.5 |
Boil
|
2 min |
1.46 |
55.6% |
|
1.80 oz
/ $ 0.00
|
Hops Summary
|
Amount
|
Variety
|
Cost
|
IBU
|
Bill %
|
|
0.80 oz |
Columbus (Pellet) 0.79999999817006 oz Columbus (Pellet) Hops |
|
46.07 |
44.4% |
|
1 oz |
Fuggles (Pellet) 0.99999999771257 oz Fuggles (Pellet) Hops |
|
1.46 |
55.6% |
|
1.80 oz
/ $ 0.00
|
Mash Guidelines
|
Amount
|
Description
|
Type
|
Start Temp
|
Target Temp
|
Time
|
|
5.5 gal |
|
Temperature |
-- |
152 °F |
60 min |
|
|
|
Temperature |
-- |
158 °F |
15 min |
|
2 gal |
|
Sparge |
-- |
168 °F |
60 min |
Starting Mash Thickness:
1.7 qt/lb
|
Target Water Profile
Balanced Profile
Notes
Clean Robobrew
Fill with 5.5 gallons (21 liters) and start heating to 152 F using both burners
[leave the malt pipe out at this time]
Check actual temp with thermometer--might have to raise a bit
[gently add in malt pipe allowing water to soak through]
Slowly add in grain and stir in
Put on lid and let sit for 60 minutes - ONLY USE 500 W burner
Recirculate pump throughout this process
Heat 2 gallons (7.6 liters) of water on stove to 168 F
Lift grain out of liquid, slowly poor in sparge water, let grains drain
Top off wort to 7.5 gallons (24.6 liters)
Bring to vigorous boil (220-225 F) - NO LID FOR BOIL
Let boil for 5 minutes before adding hops
Watch carefully for boil overs / keep spray bottle handy
Clean and sanitize fermentor, lid, airlock, siphon, hydrometer
15 ML STAR SAN W/ 5 Litres Water
Recirculate for 5 minutes during boiling to sanitize recirculation arm / or just put in sanitize solution
Add in hops at intervals as directed by recipe.
Everything that touches after this needs to be sanitized
15 minutes before boil ends add in immersion chiller
Cool wort to 70 F
Can collect first little bit to use during clean up
Transfer to sanitized fermentor and pitch yeast
Oxygen is good at this stage / shake or stir to allow oxygen
Collect some and take original gravity reading.
Fill air lock with starsan solution if possible
Ferment for 2 weeks at 20C
Then bottle or keg
Last Updated and Sharing
- Public: Yup, Shared
- Last Updated: 2019-01-31 02:05 UTC
For quick copying and pasting to a text based forum or email.
Click the Download as HTML file button below.
Recipe costs can be adjusted by changing the batch size. They won't be saved but will give you an idea of costs if your final yield was different.
|
Cost $ |
Cost % |
| Fermentables |
$ |
|
Steeping Grains
(Extract Only) |
$ |
|
| Hops |
$ |
|
| Yeast |
$ |
|
| Other |
$ |
|
| Cost Per Barrel |
$ 0.00 |
|
| Cost Per Pint |
$ 0.00 |
|
| Total Cost |
$ 0.00 |
|
Discussion about this recipe:
Recipe Tools ▼
Brew!
