Pilsner Beer Recipe | Extract German Pilsner (Pils) by Wicked Pissa Brewers | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

Pilsner

150 calories 13.1 g 12 oz
Beer Stats
Method: Extract
Style: German Pilsner (Pils)
Boil Time: 60 min
Batch Size: 5.5 gallons (fermentor volume)
Pre Boil Size: 2.5 gallons
Pre Boil Gravity: 1.102 (recipe based estimate)
Post Boil Gravity: 1.046 (recipe based estimate)
Efficiency: 60% (steeping grains only)
Source: Wicked Pissa Brewers
Calories: 150 calories (Per 12oz)
Carbs: 13.1 g (Per 12oz)
Created: Saturday March 10th 2018
1.046
1.008
5.0%
22.4
3.6
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
6 lb Liquid Malt Extract - Pilsen6 lb Liquid Malt Extract - Pilsen 35 2 75%
6 lbs / 0.00
Steeping Grains
Amount Fermentable Cost PPG °L Bill %
1 lb German - Pilsner1 lb Pilsner 38 1.6 12.5%
1 lb Munich1 lb Munich 37 6 12.5%
0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
0.50 oz Saaz0.5 oz Saaz Hops Pellet 3.5 Boil 60 min 3.79 25%
0.50 oz Perle0.5 oz Perle Hops Pellet 8.2 Boil 60 min 8.88 25%
0.50 oz Saaz0.5 oz Saaz Hops Pellet 3.5 Boil 30 min 2.91 25%
0.50 oz Perle0.5 oz Perle Hops Pellet 8.2 Boil 30 min 6.82 25%
2 oz / 0.00
 
Yeast
Fermentis - Saflager - German Lager Yeast S-23
Amount:
1 Each
Cost:
Attenuation (avg):
82%
Flocculation:
High
Optimum Temp:
48 - 72 °F
Starter:
No
Fermentation Temp:
68 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 83 B cells required
- Additional 11 grams
Amount:
1 Each
Cost:
Attenuation (custom):
75%
Flocculation:
Low
Optimum Temp:
65 - 78 °F
Starter:
No
Fermentation Temp:
68 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 83 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.25 Volumes
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
 
Notes

German Pilsner

Type – Extract:
Batch size: 5.5 gal
Boil Size: 2.5 gal
Boil Time: 60 min
Fermentation Stage: Two Stages - 2 weeks primary, 4 weeks secondary
Original Gravity: 1.046
Final Gravity: 1.008
ABV: 5%
IBU: 22.35


Ingredients:
2.5 gal Tap Water
4 Gallons Bottled Water – Note: even though this is a 5.5 gallon recipe, you will need extra water because of the fluid loss during the boil process
1lb German Pilsner
1lb Belgian Munich
6lbs Pilsen Malt Syrup
1oz Saaz Hops
1oz German Perle Hops
2 Saflager S-23 Lager Yeast


Procedure:
Start with 2.5 gal tap water, add grain to cold water and heat water to 165 degrees, and steep grains for 30 minutes
Remove grains and bring wort to boil
Remove pot from heat, add 6lbs Pilsen Malt Syrup and return wort to boil
Add .5oz Saaz hops and .5oz German Perle Hops and boil for 60 minutes
Add .5oz Saaz hops and .5oz German Perle Hops and boil for 30 minutes
Cool wort to 70 degrees
Add enough bottled water to bring the specific gravity to 1.046
Add 2 packs Saflager S-23 Lager Yeast


Fermentation:
Primary – 2 weeks at 64-70 degrees
Secondary – 2 weeks at 50-54 degrees
Secondary – 2 weeks at 44-48 degrees


Bottling:
6 weeks after brew date
Use .25oz of corn sugar per gallon of beer
Condition beer for 4 weeks at room temperature

Brewer's Friend Logo
Last Updated and Sharing
 
234
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2022-12-31 14:01 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top