E-Dubbel (reference) Beer Recipe | All Grain Belgian Dubbel | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

E-Dubbel (reference)

219 calories 20.2 g 16 oz
Beer Stats
Method: All Grain
Style: Belgian Dubbel
Boil Time: 60 min
Batch Size: 12 gallons (fermentor volume)
Pre Boil Size: 6.5 gallons
Post Boil Size: 5.5 gallons
Pre Boil Gravity: 28.7 °P (recipe based estimate)
Post Boil Gravity: 33.3 °P (recipe based estimate)
Efficiency: 94% (brew house)
Source: Brad Ledbetter
Hop Utilization: 98%
Calories: 219 calories (Per 16oz)
Carbs: 20.2 g (Per 16oz)
Created: Saturday October 16th 2021
16.3 °P
3.4 °P
7.0%
13.0
13.1
5.7
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
19.75 lb Dingemans - Belgian Pilsner Malt19.75 lb Belgian Pilsner Malt 37 1.6 84.9%
1 lb Weyermann - Caramunich Type 31 lb Caramunich Type 3 34 57 4.3%
0.50 lb Dingemans - Special B0.5 lb Special B 33.1 125 2.2%
1 lb Candi Syrup - Belgian Candi Syrup - D-451 lb Belgian Candi Syrup - D-45 32 45 4.3%
1 lb Candi Syrup - Belgian Candi Syrup - D-901 lb Belgian Candi Syrup - D-90 32 90 4.3%
23.25 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
3 oz Tettnanger3 oz Tettnanger Hops Pellet 4.544 Boil 60 min 10.99 60%
2 oz Yakima Chief Hops - Saaz CZ2 oz Saaz CZ Hops Pellet 3.5 Boil 10 min 2.05 40%
5 oz / 0.00
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
6.64 gal Strike 165 °F 131 °F 10 min
Temperature 131 °F 149 °F 90 min
Temperature 149 °F 155 °F 30 min
Temperature 155 °F 168 °F 10 min
Starting Mash Thickness: 1.25 qt/lb
Starting Grain Temp: 70 °F
 
Yeast
Wyeast - Trappist High Gravity 3787
Amount:
1 Each
Cost:
Attenuation (avg):
76%
Flocculation:
Med-High
Optimum Temp:
64 - 78 °F
Starter:
No
Fermentation Temp:
64 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 258 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 2.2 Volumes
 
Target Water Profile
Concord, NC, USA
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
0 0 0 0 0 0
Mash Chemistry and Brewing Water Calculator
 
Notes

Water treated with brewing salts to our Balanced flavour profile: Ca=50, Mg=10, Na=16, Cl=70, SO4=70 (Hit minimums on Ca and Mg, keep the Cl:SO4 ratio low and equal. Do not favour flavour / maltiness or bitterness / dryness. For balanced beers.). While this balanced profile is our preference, for something closer to Westmalle water, in his book Brew like a Monk Stan Hieronymus indicates to use: Ca=41, Mg=8, Na=16, Cl=60, SO4=26. Try brewing it both ways and see which you prefer. For more information on how to adjust your water, refer to our step by step Water Adjustment guide.

1.25 qt/lb mash thickness.

Start the mash at 131F and hold for 10 mins (high end of the protein rest range).

Ramp up to 149F and hold for 90 mins (beta rest).

Ramp up to 155F and hold for 30 mins (alpha rest).
Raise to 168F mashout temperature and hold for 10 mins.

If your system does not allow for step mashes, try a single infusion mash at 150F for 90 mins, followed by a mashout to 168F for 10 mins (if possible).

~90 min fly sparge with ~5.6-5.8 pH water (measured at mash temperature). Collect 14.9 gallons.

Boil for 90 minutes, adding Whirlfloc, hops, and candi syrup per schedule. Lid on at flameout, start chilling immediately.

Cool the wort quickly to 62F (we use a one-pass convoluted counterflow chiller to quickly lock in hop flavour and aroma) and transfer to fermenter.

Oxygenate the chilled wort to a level of 14 ppm dissolved oxygen. For more information refer to our Aerating / Oxygenating Wort guide.

Pitch yeast and ferment at 64F (wort temperature), allowing temperature to rise to 70F over one week (raise 1 degree per day). We use modified stainless fermenting buckets in wine fridges.

Allow yeast to continue until finished. Do not allow temperature to drop. If yeast seems to be stalling, do not be afraid to raise temperature as high as 75F to ensure proper attenuation. Assume fermentation is done if the gravity does not change over ~3 days.

Rack to a brite tank (we use 5 gallon glass carboys) that has been purged with CO2 to avoid oxygen pickup, add 1 tsp of unflavoured gelatin dissolved in a cup of hot distilled water per 5 gallons of beer, and allow to clear for 2-3 days.

Package as you would normally. Though some will argue that a Dubbel should only be bottled, if we still had to bottle we wouldn't be brewing beer.

Recipe Picture
Last Updated and Sharing
 
278
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-10-18 15:51 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Back To Top