Rye Patch Beer Recipe | All Grain Specialty IPA: Rye IPA | Brewer's Friend
Brew your best beer EVER. Save 10% on Brewer's Friend Premium today. Use code TAKE10. Sign Up ×

Rye Patch

197 calories 17.5 g 12 oz
Beer Stats
Method: All Grain
Style: Specialty IPA: Rye IPA
Boil Time: 60 min
Batch Size: 6.5 gallons (ending kettle volume)
Pre Boil Size: 7.5 gallons
Pre Boil Gravity: 1.052 (recipe based estimate)
Efficiency: 78% (ending kettle)
Source: Nate Graham/ Josh Williams
Calories: 197 calories (Per 12oz)
Carbs: 17.5 g (Per 12oz)
Created: Thursday May 16th 2019
1.060
1.011
6.3%
69.7
9.9
5.5
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
10 lb American - Pale 2-Row10 lb Pale 2-Row 37 1.8 74.1%
2.50 lb American - Rye2.5 lb Rye 38 3.5 18.5%
1 lb American - Caramel / Crystal 75L1 lb Caramel / Crystal 75L 33 75 7.4%
13.50 lbs / 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
1.50 oz Chinook1.5 oz Chinook Hops Pellet 13 Boil 60 min 56.1 60%
1 oz Chinook1 oz Chinook Hops Pellet 13 Boil 10 min 13.56 40%
2.50 oz / 0.00
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
5 gal Saccharification Temperature -- 152 °F 60 min
4.5 gal Sparge -- 170 °F 10 min
Starting Mash Thickness: 1.5 qt/lb
 
Other Ingredients
Amount Name Cost Type Use Time
8 g Lactic acid Water Agt Mash 1 hr.
 
Yeast
White Labs - San Diego Super Yeast WLP090
Amount:
1.50 Each
Cost:
Attenuation (avg):
79.5%
Flocculation:
Med-High
Optimum Temp:
65 - 68 °F
Starter:
No
Fermentation Temp:
66 °F
Pitch Rate:
0.35 (M cells / ml / ° P) 127 B cells required
0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
80 5 25 75 80 100
Mash Chemistry and Brewing Water Calculator
 
Notes

For this brew we looked at the BJCP guidelines and decided we wanted to do a recipe that had approx 80% 2-Row and 20% Rye. We strayed away a bit from the percentages to add in some caramel malt to add some color to meet the desired SRM per the BJCP guidelines. For the hops, we decided to use Chinook for both the bittering and aroma hop because it is a higher alpha acid hop that provides the desired piney/spicy characteristics we are looking for in a rye IPA. We decided to use the San Diego super strain from White Labs because it is a high attenuating yeast that is clean and offers a neutral flavor and aroma profile that is also desirable for the style of beer we are brewing. Our mash PH was originally 5.66 so to get it under the desired target of 5.6 we added 8g of lactic acid into the mash to get a mash PH of 5.46

Brewer's Friend Logo
Last Updated and Sharing
 
352
Views
0
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2019-05-17 00:13 UTC
Discussion about this recipe:
You must be logged in to add comments.

If you do not yet have an account, you may register here.

Brewer's Friend Logo
ASZanella 05/23/2019 at 08:08pm
Nice old school west-coast grain bill. However, modern IPAs NEED a dry-hop addition. While your mash pH is achieved with the lactic acid addition, you definitely need to add gypsum and calcium chloride to ensure there's enough calcium to ensure proper fermentation.


Back To Top