Pilsner Kit

Below is the Recipe I bought the kit from Beerlab

However, I changed the supplied yeast to 2 packets of Lager yeast and made a starter.

My efficiency was less than theirs and I ended with a start IG of 1043 so I adjusted this, will improve next batch.

Also due to work and covid my brewing regime was challenged I primary fermenter for close to 2 weeks, Diacetyl rest for 3 days then dropped the temp down to lagering at a rate of 3 degrees per day, then racked to secondary and dropped temp to about 2 to 3 degrees, for 2 weeks before bottling.



Single Saazer Pilsner (All Grain)
Posted by Lynnae Endersby on October 26, 2013

Bohemian Pilsner (All Grain)
A refreshing bright Gold Pilsner with a wonderful floral bouquet thanks to the use of only Saaz hops. This delicate Pilsner is perfectly balanced between hop bitterness and malt sweetness. (One is never enough!)

This beer is ready to drink after two weeks of fermentation and Lagering for one month after.

Serve at 4 °C

Batch size: 20 liters

Efficiency: 70.0%

Original Gravity: 1.049

Final Gravity: 1.012

Alcohol: 4.8%

Bitterness: 45.5 IBU

Boil duration: 60 min

Water needed

13 L @72 C for Mash-in (Mash ratio = 2.6 L of water per kg grain)

20 L @ 76 C for Sparge (Sparge ratio = 1.5 x quantity of Mash Water)


Ingredients

5 kg Pilsner Malt

0.2 kg Pale Crystal Malt (20 L)

0.06 kg Munich type 2

Hops: 104 g Saaz (3.2%) - 60 min

Hops: 25 g Saaz (3.2%) - 15 min (before end of boil)

Hops: 25 g Saaz (3.2 %)- 3 min (before end of boil)

5 ml Irish moss - 15 min (before the end of the boil)

Fermentis Saflager W-34/70 - YEAST


Work order

Heat 13 Liters of water to 72 °C. Add water to the (cold) mash tun. Add Grain and mix. Wait for mash temperature to settle at 65.5 °C (you can add boiling water or some ice cubes to adjust the temperature if needed)



Mash for 90 minutes



Heat 21 Liters of water to 76°C. Sparge the grain and drain wort into your brew pot



Bring the wort to the boil and add the first hop addition (104 g Saaz) .Boil for 60 minutes



15 minutes before the end of the boil

• Put immersion chiller in your pot
  
  
• Add Irish moss
  
  
• Add 25 g Saaz
  
  
• Rehydrate the yeast in 120 ml tepid water
  
  
  
  3 minutes before the end of the boil
  
  
  
  
• Add 25 g Saaz
  
  
  
  At the end of the boil cool down wort to 22 °C and add to the fermenter. Pitch rehydrated yeast
  
  Ideal fermentation temperature 12 - 15°C
  
  Ferment for 2 weeks.
  
  
  
  When final gravity has been reached transfer Pilsner to a secondary fermenter to Lager. Begin Lagering at 7°C and slowly decrease the temperature to 2 °C over a 2 week period. Bring the beer to 15°C for 3 days before bottling to ensure that fermentation is complete. Allot the beer to carbonate at room temperature for 2 weeks.
  
  
  
  Bottle with 118 g granulated sugar boiled in 200 ml water for 10 minutes & cooled. Gently add to beer and bottle.
  Tags: Pilsner, Saaz