Brewer's Friend

Print

Green Cheek West Coast IPA Is Dead!

1 calories 0.1 g 1.25 ml
brewer logo
Beer Stats
Method: All Grain
Style: American IPA
Boil Time: 90 min
Batch Size: 19 liters (fermentor volume)
Pre Boil Size: 33.42 liters
Post Boil Size: 27.43 liters
Pre Boil Gravity: 1.050 (recipe based estimate)
Post Boil Gravity: 1.061 (recipe based estimate)
Efficiency: 72% (brew house)
Source: Wolf Pack Brewing
Hop Utilization: 99%
Calories: 1 calories (Per 1.25ml)
Carbs: 0.1 g (Per 1.25ml)
Created: Thursday August 12th 2021
Similar Recipes

I Am Infinity

by HopMantis Brewing Co

OG: 1.063 FG: 1.012 ABV: 6.6% IBU: 84

Moon Dust IPA

by guco

OG: 1.059 FG: 1.013 ABV: 6.1% IBU: 73

West Coast IPA

by Norvaan

OG: 1.060 FG: 1.011 ABV: 6.3% IBU: 74

1.061
1.010
6.7%
73.6
4.3
5.6
0.56
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
5.20 kg Gladfield - German Pilsner Malt5.2 kg German Pilsner Malt 37.3 2.03 100%
5.20 kg / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
35 g Simcoe35 g Simcoe Hops Pellet 12.7 Boil 75 min 61.23 10.3%
50 g Simcoe50 g Simcoe Hops Pellet 12.7 Whirlpool at 89 °C 25 min 12.37 14.7%
85 g Simcoe85 g Simcoe Hops Pellet 12.7 Dry Hop 2 days 25%
170 g Citra170 g Citra Hops Pellet 11 Dry Hop 2 days 50%
340 g / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
2.25 g Wyeast - Beer Nutrient $ 0.25 / g
$ 0.56 		Other Boil 15 min.
1 each Whirlfloc Water Agt Mash 0 min.
2 g Epsom Salt Water Agt Mash 0 min.
1 g Table Salt Water Agt Mash 0 min.
2 g Gypsum Water Agt Mash 0 min.
5 g Calcium Chloride (anhydrous) Water Agt Mash 0 min.
1 ml Lactic acid Water Agt Sparge 0 min.
$ 0.56
 
Yeast
Fermentis - Safale - American Ale Yeast US-05
Amount:
2 Each
Cost:
Attenuation (avg):
81%
Flocculation:
Medium
Optimum Temp:
12 - 25 °C
Starter:
No
Fermentation Temp:
20 °C
Pitch Rate:
0.35 (M cells / ml / ° P) 100 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
Priming
CO2 Level: 0 Volumes
 
Target Water Profile
Light colored and malty
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
60 5 10 95 55 0
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
20 L Strike 65 °C 64 °C 30 min
20 L Sparge 76 °C 76 °C 45 min
Starting Mash Thickness: 3 L/kg
Starting Grain Temp: 18 °C
Quick Water Requirements
Water Liters
Strike water volume at mash thickness of 3 L/kg 15.6
Mash volume with grains 19
Grain absorption losses -5.2
Remaining sparge water volume (equipment estimates 18.5 L) 23.9
Mash Lauter Tun losses -0.9
Pre boil volume (equipment estimates 28 L) 33.4
Boil off losses -8.6
Hops absorption losses (first wort, boil, aroma) -0.2
Post boil Volume (equipment estimates 19.3 L) 27.4
Hops absorption losses (whirlpool, hop stand) -0.3
WARNING: Exceeded batch size - reduce boil size  
Going into fermentor (equipment estimates 27.2 L) 19
Total: 39.5  
Equipment Profile Used: System Default
 
Notes

https://beerandbrewing.com/recipe-west-coast-ipa-is-dead/

Mill the grains and mash at 148°F (64°C) for 30 minutes. Vorlauf until the runnings are clear, then run off into the kettle. Sparge and top up as necessary to get about 6.5 gallons (25 liters) of wort—or more, depending on your evaporation rate. Boil for 90 minutes, adding boil hops according to the schedule. After the boil, stir to conduct a whirlpool, adding the correct amount of ambient-temperature water to hit target gravity and bring down the wort temperature to 192°F (89°C). Whirlpool with hops for 10 minutes, then allow 15 minutes to settle. Chill the wort to 66°F (19°C), aerate well, and pitch the yeast. Ferment at 68°F (20°C).

Once fermentation slows, rack off of yeast or drop yeast out of the conical, transfer to a sanitized and CO2-purged container, and add dry hops at 68°F (20°C). Once the beer clears diacetyl tests (see “Hunting for Diacetyl,” beerandbrewing.com), crash to 28°F (-2°C) for 3 days. Then package and carbonate to desired level.

Last Updated and Sharing
 
6,585
Views
1
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2021-08-17 02:03 UTC