Pale Ale - Honeysuckle & Spruce Tip split 10 gal - Beer Recipe - Brewer's Friend

Brewer's Friend

Print

Pale Ale - Honeysuckle & Spruce Tip split 10 gal

171 calories 16.3 g 12 oz
brewer logo
Beer Stats
Method: All Grain
Style: American Pale Ale
Boil Time: 60 min
Batch Size: 11 gallons (fermentor volume)
Pre Boil Size: 12 gallons
Pre Boil Gravity: 1.048 (recipe based estimate)
Efficiency: 75% (brew house)
Source: http://www.homebrewtalk.com/f66/bee-cave-brewery-h
Calories: 171 calories (Per 12oz)
Carbs: 16.3 g (Per 12oz)
Created: Friday May 26th 2017
1.052
1.011
5.4%
45.8
9.8
n/a
n/a
 
Fermentables
Amount Fermentable Cost PPG °L Bill %
15 lb American - Pale 2-Row15 lb Pale 2-Row 37 1.8 71.4%
2 lb American - Wheat2 lb Wheat 38 1.8 9.5%
2 lb Belgian - CaraVienne2 lb CaraVienne 34 20 9.5%
2 lb Flaked Oats2 lb Flaked Oats 33 2.2 9.5%
21 lbs / $ 0.00
 
Hops
Amount Variety Cost Type AA Use Time IBU Bill %
2 oz Magnum2 oz Magnum Hops Pellet 13 Boil 60 min 45.81 18.2%
4 oz Citra4 oz Citra Hops Pellet 11 Boil 0 min 36.4%
3 oz Lemondrop Trois3 oz Lemondrop Trois Hops Pellet 7 Dry Hop 0 days 27.3%
2 oz Simcoe Spruce2 oz Simcoe Spruce Hops Pellet 12.7 Dry Hop 0 days 18.2%
11 oz / $ 0.00
 
Other Ingredients
Amount Name Cost Type Use Time
4 g Calcium Chloride Water Agt Mash 1 hr.
1 g Epsom Salt Water Agt Mash 1 hr.
7 g Gypsum Water Agt Mash 1 hr.
1 each Whirlfloc Water Agt Boil 15 min.
1 tbsp Yeast Nutrient Other Boil 15 min.
 
Yeast
White Labs - San Diego Super Yeast WLP090
Amount:
1 Each
Cost:
Attenuation (avg):
79.5%
Flocculation:
Med-High
Optimum Temp:
65 - 68 °F
Starter:
Yes
Fermentation Temp:
65 °F
Pitch Rate:
0.75 (M cells / ml / ° P) 402 B cells required
$ 0.00 Yeast Pitch Rate and Starter Calculator
 
Target Water Profile
Balanced Profile
Ca+2 Mg+2 Na+ Cl- SO4-2 HCO3-
80 5 25 75 80 100
7 g Gypsum

2 g CaCL

1 g Epsom Salt
Mash Chemistry and Brewing Water Calculator
 
Mash Guidelines
Amount Description Type Start Temp Target Temp Time
7.7 gal Shoot for 152 pH *: 5.45 Infusion -- 167 °F 60 min
7.7 gal Collect 11 gal Sparge -- 172 °F --
Quick Water Requirements
Water Gallons  Quarts
WARNING: Boil kettle capacity (12 gal | 48 qt) exceeded. Volume required: 12.73 gal (50.9 qt). Suggest reducing initial water volume to 12 gal (48 qt) and adding 0.73 gal (2.9 qt) sparge/top-off.    
Strike water volume at mash thickness of 1.75 qt/lb 9.19 36.8  
Mash volume with grains 10.87 43.5  
Grain absorption losses -2.63 -10.5  
Remaining sparge water volume (equipment estimates 6.41 g | 25.7 qt) 5.69 22.8  
Mash Lauter Tun losses -0.25 -1  
Pre boil volume (equipment estimates 12.73 g | 50.9 qt) 12 48  
Boil off losses -1.5 -6  
Hops absorption losses (first wort, boil, aroma) -0.23 -0.9  
Post boil Volume 11 44  
Going into fermentor 11 44  
Total: 14.88 59.5
Equipment Profile Used: System Default
 
Notes

You want a high CaCl for this style. My water goes like this, and should be a safe bet if you havent tested your water (per 5 gallons):
3g CaCl
3g Gypsum
0.5 g Epsom Salts

If the pH is too high, this usually means adding acid malt (~1% of the grist for every intended .1 drop)
If the pH is too low I add chalk (which should ideally be dissolved in carbonated water first) or baking soda (which can be added directly to the mash).

https://www.reddit.com/r/Homebrewing/comments/4wbz2g/th_milkshake_inspired_beer_sort_of/

http://threegodsbrewing.com/2016/05/02/musings-on-ne-style-ipas/

http://www.themadfermentationist.com/2015/06/hop-juice-north-east-ipa-recipe.html



Award Winning Recipe
Last Updated and Sharing
 
1,537
Views
3
Brews
Recipe QR Code
  • Public: Yup, Shared
  • Last Updated: 2020-08-14 16:03 UTC